• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.88-93
• /
• 2017

나로우주센터에 구축/개발된 3단 엔진 연소시험설비에서 다단연소사이클 액체 로켓엔진의 시험을 수행하였다. 수류시험과 점화시험, 연소시험이 이루어졌으며 예연소기의 연소압력 제어를 위한 TTR의 개도를 $143^{\circ}$에서 $185^{\circ}$ 까지 변화시키며 시험을 수행하였다. 시험 결과 엔진의 주요성능과 TTR 개도에 의한 수력학적 변화를 확인하였지만 연소압력의 제어성 확인을 위한 결과는 얻지 못하였다. 향후 본 논문의 연구에서 도출된 개선점을 보완한 예연소기 압력제어 연구가 이루어질 것이다.

• 지질공학
• /
• 제12권4호
• /
• pp.459-469
• /
• 2002

재성형된 해성점토 시료를 연직·수평방향으로 채취하여 표준압밀시험(SCT)과 일정변형률속도 압밀시험(CRSC)을 실시하여 연약 해성점토지반에 대한 압밀정수들의 구성관계를 확인하였다. 또한, 불교란 교란 화강암질 풍화토의 표준·일정변형률속도 압밀시험을 통하여 화강암질 풍화토에 대한 압밀 정수들의 특성과 적용성을 고찰하였다. 그 결과 해성점토 시료의 연직·수평방향과 표준·일정변형률속도압밀시험 방법에 따라 선행압밀응력, 압축지수, 과잉간극수압, 간극수압비 등이 달리 산정됨을 알 수 있었다. 또한, 불교란·교란 화강암질 풍화토 시료에서도 해성점토와 유사하게 과압밑·정규압밀 구간에서 압밀정수들의 변화를 확인하였다.

• 한국화재소방학회논문지
• /
• 제26권4호
• /
• pp.18-23
• /
• 2012

이산화탄소 주조법에서 사용되고 있는 방법을 응용하여 목질내에 규산겔과 탄산소다, 이산화규소가 석출된 목재를 제조한 후 외부 복사열원(20, 25, 35 및 50 $kW/m^2$)에 따른 점화시간, 점화온도, 질량감소속도, 임계열유속을 측정하였다. 연구결과, 물유리와 이산화탄소를 이용한 가압함침 처리된 목재는 Pre-Flashover 단계에서의 복사열원(20 $kW/m^2$ 이하)에서 난연성능이 있음을 확인할 수 있었다. 향후 지속적인 연구를 통해 우수한 배합비율을 찾는다면 난연목재로서의 활용가능성이 있다고 판단된다.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4643-4648
• /
• 2010

본 논문에서는 주요 온실가스인 이산화탄소를 고압 환원 분위기인 연소전 조건에서 회수하기 위해 물리흡수제인 DMSO, Sulfone, PEG를 이용하여 이산화탄소 흡수특성을 조사하였다. 회분식 기-액 평형반응기를 이용하여 흡수반응온도 및 압력에 따른 이산화탄소 용해도와 물리흡수제의 재생성, 그리고 초기흡수특성을 연구하였다. 실험결과 PEG가 이산화탄소 용해도 및 초기 흡수능력이 가장 우수하였다. 그리고 PEG를 비롯한 물리흡수제가 다양한 흡수반응온도 및 압력에서 우수하게 재생됨을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1220-1227
• /
• 2001

The condensation pressure drop fur refrigerant R-22 flowing in the plate and shell heat exchanger were investigated experimentally in this study. Two vertical counterflow channels were formed in the exchanger by three plates of commercial geometry with a corrugated trapezoid shape of a chevron angel of $45^{\circ}$. The condensing R-22 flowing down in one channel exchanges heat with the cold water flowing up in the other channel. The effects of the mean vapor quality, mass flux, average imposed heat flux and system pressure of R-22 on the pressure drop were explored in detail. The quality change of R-22 between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.05. The present data showed that pressure drop increases with the vapor quality. At a higher mass flux, pressure drop is higher for the entire range of the vapor quality. Also, a rise in the average imposed heat flux causes an slight increase in the Pressure drop. Finally, at a higher system pressure the pressure drop is found to be slightly lower. Correlation is also provided for the measured pressure drops in terms of the friction factor.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.69-69
• /
• 2003

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권1호
• /
• pp.53-62
• /
• 1987

The Performance of Pre-combustion Chamber Diesel Engine mainly depends upon the compression, combustion and Expansion Processes. The analysis of varying tendency of the work factors for crank angles during these processes, which are consisted of 5 items such as exothermic energy, flow work, work in nozzle part, kinetic energy and cooling energy, are considered important as basic elements for effective combustion and performance improvement. In this paper, varying tendencies of the theoretical factors are investigated with pressure data through experiments. By the results, the trends of work factors are presented as basic data for comparing the influencing effects on work.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2002년도 High Temperature Superconductivity Vol.XII
• /
• pp.68-68
• /
• 2002

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.883-888
• /
• 2002

SiC direct bonding technology is very attractive for both SiCOI(SiC-on-insulator) electric devices and SiC-MEMS(micro electro mechanical system) fields because of its application possibility in harsh environments. This paper presents pre-bonding techniques with variation of HF pre-treatment conditions for SiC wafer direct bonding using PECVD(plasma enhanced chemical vapor deposition) oxide. The PECYD oxide was characterized by XPS(X-ray photoelectron spectrometer) and AFM(atomic force microscopy). The characteristics of the bonded sample were measured under different bonding conditions of HF concentration and an applied pressure. The bonding strength was evaluated by the tensile strength method. The bonded interface was analyzed by using SEM(scanning electron microscope). Components existed in the interlayer were analyzed by using FT-IR(fourier transform infrared spectroscopy). The bonding strength was varied with HF pre-treatment conditions before the pre-bonding in the range of 5.3 kgf/cm$^2$to 15.5 kgf/cm$^2$.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권3호
• /
• pp.94-99
• /
• 2009

In the Korean subway station, three types of pre-filters, which include auto filter, electrostatic precipitator (ESP) and auto cleaning demister, are widely used. However, these devices have some problems such as the difficulty of maintenance and high operating cost. In this study, axial-flow cyclone separator was employed as a pre-filter inside a heating, ventilation, and air conditioning (HVAC) system. 3-dimensional computational fluid dynamics (CFD) analysis was performed on a single unit axial-flow cyclone and coupled unit axial-flow cyclone. Calculated and measured pressure drop of the designed axial-flow cyclone were found be comparable to other types of pre-filters and the observed cut-off diameter was less than 10 micron. Considering lower operating and maintenance cost, axial-flow cyclone was proved to be a better solution as a pre-filter.