• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.18-23
• /
• 2009

After the installation of electric cables at block, PE(pre-erection) and hull stages, the coating stains on the electric cable sheath were unavoidably occurred by additional painting process. According to class rules paint or coating applied on the electric cables shall not adversely affect the mechanical, chemical of fire resistant characteristics of the electric cable sheath. However, there has not been quantitatively studied about the effect of coating stains on properties of sheath materials. In this study, we tried to investigate the effect of coating stains on the performance and deterioration of sheath materials by using FTIR, SEM analysis, flame retardant, high potential voltage and tensile test. The results sowed that coating stains, which were occurred during painting work on site could not adversely affect on the performance and deterioration of sheath materials.

• Journal of Welding and Joining
• /
• 제28권1호
• /
• pp.54-59
• /
• 2010

Ship Blocks are assembled by welding, and among them, welding between large blocks (Pre-erection stage) is used as feature of butt. In this process, local material has a experience of thermal cycle and become finally shrunk. As for inconsistency of shrunk weldments and adjacent regions, ship structure would be deformed locally and globally. Thermal distortion analyses are done for control of these processes, and methodologies capable of ship block size among them are using 2-D shell element in FEM. A shell element takes charge of plate, so it has its thickness which is important for angular distortion by welding. By the way, a butt-welding consists normally of several passes, and weldment thickness are different at each pass. If a calculated final one-time welding shrinkage is acting on the shell element whose thickness is same as it of plate, then deformation value must be underestimated. This research developed a methodology that total deformation after multi-pass welding can be analyzed by one time at shell element having original thickness of its plate. We use the SDB thermal distortion analysis method and verified by several experiment. The both experimental and analysis results showed good agreements.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.362-371
• /
• 2009

Shipbuilding is a typical 'build to order' industry. It has a business model that generates revenues from building various ships and offshore products in accordance with owner's requirements at each production stage. Under uncertainty in shipping market, it is very essential for the shipbuilder to prepare the fast and competitive decision for product portfolio strategy in order to maximize contribution margin by exploiting production facilities and constraints. In this study, we introduce the unique decision supporting methodology for the optimal product portfolio sets based on Theory of Constraints(TOC). This methodology is established by adopting the concept of Drum Buffer Rope(DBR) in constraints planning and Throughput Accounting (TA) in management accounting of TOC. In addition, Decision Supporting System(DSS) is implemented. This DSS system provides a throughput estimator with reflecting the cost structure of shipbuilding industry and a resource simulator built on heuristic algorithms to operate major constraint-resources in shipyard such as dock, quay and pre-erection area etc. Several examples are presented to show that the proposed methodology and system can effectively support the strategic decision-making process of a global shipbuilding company.

• 산업공학
• /
• 제24권1호
• /
• pp.78-86
• /
• 2011

To mitigate space restriction and to raise productivity, some shipbuilding companies use floating-docks on the sea instead of dry-docks on the land. In that case, a floating-crane that can lift very heavy objects (up to 3,600 tons) is used to handle the blocks which are the basic units in shipbuilding processes, and so, very large blocks (these are called the mega-blocks) can be used to build a ship. But, because these mega-blocks can be made only in the area near the floating-dock and beside the sea, the space is very important resource for the process. Therefore, our problem is to make an efficient spatial schedule for the mega-block assembly yard. First of all, we formulate this situation into a mathematical model and find optimal solution for a small problem using a commercial optimization software. But, the software could not give optimal solutions for practical sized problems in a reasonable time, and so we propose a GA-based heuristic algorithm. Through a numerical experiment, finally, we show that the spatial scheduling algorithm can provide a very good performance.

• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.147-156
• /
• 2019

The purpose of this study is to consider structural issues and analyze construction sequences when constructing hanging floors supported by Mega truss. Since suspended structures were supported by the Mega truss, vertical load on suspended structures was needed to transfer from low to high. Deflection management of structures was the primary point under construction. The results of this study were as follows; The steel structures, which has relatively lighter self-weight, were constructed upwards after the base floor steel truss erection. Concrete Placing, which has relatively heavier self-weight, were performed in two phases to minimize structure's deflection. Slab was placed downwards from the top floor to lower floor whereas column was places upwards. Deflection measurements were carried out at every construction sequences.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.214-221
• /
• 2001

인천국제공항 교통센터의 Great Hall은 3차원의 입체적 곡면 Truss로 구성되어 있고, Great Hall Roof Truss는 최대 경간162m, 480Ton인 Truss을 포함한 13개의 Main Steel Truss로 구성되어 있다. Great Hall Roof Truss는 총 중량 6,300Ton, 9,600 Pieces로 1개의 절점당 최대 13개의 다른 부재가 접합하게 되어 있고, 12개의 Fabric 기초에 의해 지지된다. 경제적인 효과와 공기적 측면을 고려하여 기존 재래식(가설 Bent) 공법보다 Block화 공법 및 Sliding공법을 채택하였다. Roof 구조물은 3,550Ton과 2,700Ton 중량인 두 Block으로 나누고 구조물 외부에 설치 된 Giant Sleigh에 선 조립 후 Tandem Pulling Jack과 Strand를 이용하여 181m를 Sliding하여 본 구조물의 위치에 설치되었다.

• Journal of Ginseng Research
• /
• 제23권4호
• /
• pp.247-256
• /
• 1999

Ginseng has been used in maintaining physical vitality throughout the far-eastern countries and recently its metabolism and actions on neurologic, cardiovascular, and endocrinologic systems are studied. Korean red ginseng (KRG) has been used in various ailments, and to prove its efficacy for erectile dysfunction an international study on Asians other than Korean was performed. Patients with borderline organic and psychogenic erectile dysfunction were included. KRG were given daily, and placebo were given as controls. Treatment lasted a total of 3 months. Surveys including libido, erection, ejaculation, sexual activity, and sexual satisfaction were given. Serum testosterone and erectile function study were taken. Among the 64 patients, 37 patients were followed with KRG. Five had diabetes, 5 hypertension, 5 hypercholesterolemia, 6 low testosterone, 6 psychogenic, and 11 idiopathic. The improvement after KRG administration was $70.2\%$ on objective questionnaire and $75.7\%$ on subjective analysis. When KRG were given, all parameters surveyed have shown improvements compared to the placebo. The effects of KRG in Chinese and Singapores were similar to the Koreans. Serum testosterone levels were nonnalized in 6 patients with KRG, who's serum testosterone levels were reduced from pre-study. Two patient reported constipation, and 2 gastric upsets in the KRG group. In conclusion, KRG has beneficiary action on male erectile capabilities with little side effects. KRG is effective in Koreans and also Asians. The exact action mechanism and the active ingredients in KRG need to be studied.

• 한국강구조학회 논문집
• /
• 제19권4호
• /
• pp.425-434
• /
• 2007

SC 합성기둥은 기존의 합성기둥들이 가지는 내력상승, 방청효과, 공사기간 단축이 가능하고, 충전상태의 육안확인도 용이하여 이와 관련된 연구가 활발히 진행되고 있지만 SC합성기둥의 내화성능에 관한 연구는 미흡한 실정이다. 이에 본 논문에서는 SC합성기둥의 내화성능평가를 위해 하중비, 콘크리트 면적비, 피복유무를 변수로 두어 실험을 수행하였다. 또한 온도증가에 따른 실험체의 강도감소를 단순 수치해석으로 산출하여 내화성능시간을 유추하였고, 실험결과와 비교분석 하였다. 이 실험을 통하여 하중비가 작을수록 내화성능은 향상되었다. 그러나 콘크리트 면적비는 SC합성기둥의 내화성능 향상에 큰 영향을 미치지 못하였다.

• Steel and Composite Structures
• /
• 제44권1호
• /
• pp.33-47
• /
• 2022

This paper presents a finite element model for predicting the monotonic behaviour of bolted endplate joints connecting steel-concrete composite walls and steel beams. The demountable Hollo-bolts are utilised to facilitate the quick installation and dismantling for replacement and reuse. In the developed model, material and geometric nonlinearities were included. The accuracy of the developed model was assessed by comparing the numerical results with previous experimental tests on hollow/composite column-to-steel beam joints that incorporated endplates and Hollo-bolts. In particular, the Hollo-bolts were modelled with the expanded sleeves involved, and different material properties of the Hollo-bolt shank and sleeves were considered based on the information provided by the manufacture. The developed models, therefore, can be applied in the present study to simulate the wall-to-beam joints with similar structural components and characteristics. Based on the validated model, the authors herein compared the behaviour of wall-to-beam joints of two commonly utilised composite walling systems (Case 1: flat steel plates with headed studs; Case 2: lipped channel section with partition plates). Considering the ease of manufacturing, onsite erection and the pertinent costs, composite walling system with flat steel plates and conventional headed studs (Case 1) was the focus of present study. Specifically, additional headed studs were pre-welded inside the front wall plates to enhance the joint performance. On this basis, a series of parametric studies were conducted to assess the influences of five design parameters on the behaviour of bolted endplate wall-to-beam joints. The initial stiffness, plastic moment capacity, as well as the rotational capacity of the composite wall-to-beam joints based on the numerical analysis were further compared with the current design provision.

• 대한토목학회논문집
• /
• 제42권2호
• /
• pp.151-162
• /
• 2022

스마트 건설 기술의 도입으로 공장에서 일괄 대량생산이 가능한 프리팹 부재에 대한 관심이 높아졌다. 프리팹 프리스트레스 콘크리트 거더는 가설시 프리팹 바닥판과의 정합성을 위해 제작부터 가설 전 단계까지 거더의 형상관리가 중요하다. 이 연구에서는 프리팹 거더의 상연 및 하연에 병치된 변형률 측정치를 이용한 캠버 재구성 기법을 제시한다. 특히, 긴장력 도입 이후 가설 전까지 콘크리트의 시간 의존적 거동이 고려된 변형률 데이터에 대해 캠버 재구성 기법을 적용한다. 몬테카를로 수치 모사를 통해 제한된 센서의 개수, 계측 오차 그리고 비선형적 시간 의존적 거동들에 대해 재구성된 캠버의 통계적 정확도를 분석하고 타당성을 검증한다.