• Journal of Community Nutrition
• /
• 제8권4호
• /
• pp.165-170
• /
• 2006

This study was conducted to develop and apply a computer-based multimedia nutrition education program for preschoolers based on the Dick and Carey model of instructional design. The Dick and Carey model included 4 phases: analysis, design, development, and evaluation. The program's instructional goals, objectives, assessment instruments, content, examples, and practice questions with feedback were written in the design phase. To be familiar with the 5 food groups, 'Nutrition exploration' were programmed using Hyperstudio. 'Nutrition exploration' was designed as a five-session, interactive multimedia game, with each session taking about 5 minutes to complete. Nineteen preschoolers, aged 6, volunteered to participate formative evaluation. The effectiveness of the program was examined using a pre-post test design. Participants were recruited by personal contact at the individual preschool education center. The application was carried out during 4 weeks. The results showed that intervention participants significantly increased knowledge between pre-test and post-test. The results support using IMM (interactive multimedia) to disseminate nutrition education to the target population. This research provides the basis for continuing development of computer-based nutrition education materials.

• 한국항공우주학회지
• /
• 제32권5호
• /
• pp.1-9
• /
• 2004

수직이착륙과 고속수평비행이 기능한 스마트 무인기 개발의 일환으로 초기개념설계용 성능예측 프로그램을 작성하였다. 스마트 무인기가 요구하는 설계조건을 기반으로 각 임무 단계 수행과정에서의 연료소모중량을 반복계산하여 전체 중량을 예측하고, 동시에 무인기의 주요형상변수, 추진성능, 수직이착륙성능, 수평비행성능 등의 계산을 통해 성능예측 및 설계요구조건 만족여부 판단, 경향성 분석을 수행할 수 있다. 동 프로그램은 수직이착륙 무인항공기 비행체의 초기개념설계단계에서 비행체의 경향성 분석, 비행성능 예측 및 설계 요구조건 검증 등을 손쉽고 간편하게 수행 할 수 있는 도구도서 사용할 수 있다.

• 대한전자공학회논문지SD
• /
• 제46권7호
• /
• pp.61-67
• /
• 2009

본 논문에서는 0.25-$\mu$m 디지털 CMOS공정으로 제작된 UHF대역 RFID를 위한 무선통신용 쿼드러처(Quadrature) 출력이 가능한 Integer-N방식의 PLL 주파수 합성기를 설계 및 제작하여 측정하였다. Integer-N 방식의 주파수 합성기의 주요 블록인 쿼드러처 전압제어 발진기(Voltage Controeld Oscillator, VCO)와 위상 주파수 검출기(Phase Frequency Detector, PFD), 차지 펌프(Charge Pump, CP)를 설계하고 제작하였다. 전압제어발진기는 우수한 위상노이즈 특성과 저전력 특성을 얻기 위해 LC 공진기를 사용하였으며 전압제어 가변 캐패시터는 P-channel MOSFET의 소스와 드레인 다이오드를 이용하여 설계되었으며 쿼드러처 출력을 위해 두 개의 전압제어발진기를 서로 90도 위상차를 가지도록 설계하였다. 주파수 분주기는 프리스케일러(Pre-scaler)와 아날로그 디바이스사의 칩 ADF4111을 사용하였으며 루프 필터는 3차 RC필터로 설계하여 측정하였다. 측정결과 주파수 합성기의 RF 출력 전력은 50옴 부하에서 -13dBm이고, 위상 잡음은 100KHz offset 주파수에서 -91.33dBc/Hz 이었으며, 동작 주파수영역은 최소 930MHz에서 최대 970MHz이고 고착시간은 약 600$\mu$s이다.

• 시스템엔지니어링학술지
• /
• 제4권1호
• /
• pp.31-34
• /
• 2008

As a supply contract for 100 new high-speed rolling stocks(KTX-II) was made 8th June 2006, System Engineering process has been applied to introduce the high-speed rolling stocks successfully and to manage the total life cycle systematically from Pre-concept Phase, Contract Phase, Preliminary and Critical Design Review, Production, Test and Verification, Acceptance and Operation to assurance for a flaw.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.69-77
• /
• 2000

The reinforced concrete(RC) flexural members strengthened with steel plate/CFS at soffit have initial stresses and strains in reinforcements and concrete caused by the service loads at the time of retrofitting works. These initial residual stresses and strains of strengthened beams may affect the flexural performance of the rehabilitated beams. The objective of this study is to evaluate and verify the effectiveness of rehabilitation by external bonded steel plates and CFS to the tension face of the beams under three conditions of pre-loading. Thirteen beam specimens are tested and analyzed. Main test parameters are pre-loading conditions, strengthening materials and reinforcement ratio of specimens. The effect of test parameters on the strengthened beams is analyzed from the maximum load capacity, load-deflection relationship, state of stress of the materials. crack propagation phase, and failure modes. Both test results and design formulas of ACI Code provisions are compared and evaluated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.135-139
• /
• 2008

For deep basement construction of buildings downtown, the usage of Top-Down Method is increasing as much as ever from strong demand. One of the essential elements for the construction by Top Down Method is the pre-founded columns, which are installed in the ground and on which a building is installed. The fact that the pre-founded columns are placed in the ground makes them susceptible to its plumbness; this aspect distinguishes pre-founded columns from general columns. However, there are no criteria for erection tolerance. Therefore, field-measured-data concerning out-of-plumb of pre-founded columns in the construction field should be accumulated and investigated so that criteria and specifications for the erection tolerance of pre-founded columns may be established through the understanding of its aspects. In this paper, we investigate out-of-plumb of pre-founded columns for the construction case and analyze its aspects, and propose considerations for design and construction phase.

• 산업공학
• /
• 제17권spc호
• /
• pp.103-110
• /
• 2004

This paper presents a two-phase method for the vehicle routing problems with time windows(VRPTW). In a supply chain management(SCM) environment, timely distribution is very important problem faced by most industries. The VRPTW is associated with SCM for each customer to be constrained the time of service. In the VRPTW, the objective is to design the least total travel time routes for a fleet of identical capacitated vehicles to service geographically scattered customers with pre-specified service time windows. The proposed approach is based on ant colony optimization(ACO) and improvement heuristic. In the first phase, an insertion based ACO is introduced for the route construction and its solutions is improved by an iterative random local search in the second phase. Experimental results show that the proposed two-phase method obtains very good solutions with respect to total travel time minimization.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제34권3호
• /
• pp.235-256
• /
• 2020

본 연구는 예비수학교사의 교육실습 현장수행 역량을 높이기 위해, 디자인 사고 프로세스를 활용한 대학수업과 학교 현장의 교육실습 연계형 프로그램을 운영하고 참여한 예비수학교사들의 경험을 분석하는 데 목적을 두었다. 이를 위해, 2019학년도 1학기 교육실습 대상자인 예비수학교사 8명이 참여한 대학 전공 수업에 디자인 사고 5단계 프로세스를 적용한 후, 참여자 집단 및 개별 면담 자료와 디자인 사고 활동 결과물 등 질적 자료를 수집 분석하였다. 자료 분석에 따른 연구결과는 다음과 같다. 첫째, 대학수업에서의 디자인 사고 1~4단계를 통해 참여자들의 인식은, 초기에 공감 단계의 혼돈과 막연함에서 시작하였으나 시간의 흐름에 따라 프로그램 활동에 대해 보다 적극적인 변화를 보였다. 둘째, 교육실습 중, 디자인 사고의 5번째 단계인 평가단계에서는, 참여 예비수학교사들이 이전단계에서 생성한 프로토타입의 적용성을 확인하는 활동을 적극적으로 수행하였다. 다만, 일부 현장의 허용적이지 않은 상황으로 인해 프로토타입의 적용에 어려움을 가진 사례도 있었다. 셋째, 교육실습 후, 대학수업에서의 평가 및 성찰 과정에서 참여자들은 디자인 사고 활동의 필요성에 긍정적으로 공감하였다. 끝으로, 대학수업과 학교현장의 교육실습 간 융통성 있는 연결을 위해 두 영역의 긴밀한 연계가 전제될 필요가 있음이 확인되었다.

• 생물정신의학
• /
• 제10권1호
• /
• pp.70-79
• /
• 2003

Object : Currently, the alteration of cytokine system has been known to play an important role in regard to depressive symptom. We focused on the relationship between immunological parameters and clinical improvement in major depressive disorder. Method : Data were collected on 26 patients with major depressive disorder using a 8-week prospective follow-up design. After 8-week treatment period with fluoxetine, patients were classified into a response group and a non-response group according to their psychopathological outcome as evaluated by Hamilton Depression Rating Scale. The differences of the immunological parameters between pre-treatment phase and post-treatment phase were compared among patients. The difference of those was also compared within each phase among them. The relationship between socio-demographic variables, depression, cytokine, mononuclear cells was examined by correlation analysis. Multiple regression analyses were performed to explore the predictors of clinical improvement of major depressive disorder. Result : Pre-treatment levels of IL-$1{\beta}$ in the response group were significantly higher than those in the non-response group. Pre-treatment levels of IL-$1{\beta}$ of all patients and in the response group were positively correlated with pre-treatment monocyte counts. Patients with subsequent remission showed significantly lower IL-6 values at baseline than those with non-response. Post-treatment values of IL-6 did not differ significantly among the patients. The correlation test showed more frequent relations among cytokines and mononuclear cells in the response group than in the non-responder group. Especially, serum level of IL-6 in pre-treatment phase was only significantly correlated with HAMD score after 8-week treatement phase, while other cytokines and mononuclear cells were not. Pretreatment level of IL-6 was of paramount importance in predicting clinical improvement of depressive symptom. Conclusion : The immune system of major depressive disorder patients might dichotomize the patients into subsequent responders and non-responders. Immune system might be of great influence on the clinical improvement of major depressive disorder. The mode of interaction between depression and cellular immune function and the mediators responsible for the cytokine production need to be studied further.

• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.393-400
• /
• 2010

Korea Astronomy and Space Science Institute has been developing one mobile satellite laser ranging system named as accurate ranging system for geodetic observation-mobile (ARGO-M). Preliminary design of ARGO-M operation system (AOS) which is one of the ARGO-M subsystems was completed in 2009. Preliminary design results are applied to the following development phase by performing detailed design with analysis of pre-defined requirements and analysis of the derived specifications. This paper addresses the preliminary design of the whole AOS. The design results in operation and control part which is a key part in the operation system are described in detail. Analysis results of the interface between operation-supporting hardware and the control computer are summarized, which is necessary in defining the requirements for the operation-supporting hardware. Results of this study are expected to be used in the critical design phase to finalize the design process.