• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.2
• /
• pp.85-92
• /
• 2007

This study focused on bean-juice treatment method which have dyeing property to indigo, yellow soil, sappan wood, cochineal and also on the possibility of applying to mordanting. This is different from the active mordanting using chemicals. Natural mordants with development of dyeing are not harmful, also are the medicines for disease. Limestone and ash neutralize the acidic soil. bean-juice protein adhere to cellulose surface and change the physical properties of protein so that coloring of dye is better than before and film non-soluble in water is made. Therefore the color made from bean-juice process lasts after washing. This study try to show one of the ways to improve the current method using the heavy metal which can have bad effects for environment and human being. Bean-juice(raw bean, heated bean) treatment method can be the way to fix the natural dyeing problem of bad dyeing. Bean-juice had been treated under various condition with pre-treatment, post-treatment and raw bean, heated bean. Following results are obtained in this study. In the case of Indigo dyeing, pre-treatment of heated bean shows the biggest difference of color. In the case of yellow soil dyeing, pre-treatment of raw bean-juice shows the biggest gap of color. Pre-treatment of heated bean in sappan wood dyeing case and post-treatment of raw bean show bigger color difference than pre-treatment of raw bean. In cochineal dyeing, raw bean pre-treatment shows the biggest color difference.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.203-206
• /
• 2006

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.155-159
• /
• 2015

Light emitting devices (LEDs) are widely used in the liquid crystal display (LCD) industry, especially for LCD back light units. Therefore, much research has been performed to minimize manufacturing costs. However, the current process does not process LED chips from broken substrates even though the substrate is expensive sapphire wafer. This is because the broken substrates lose their alignment marks. After pre-processing, LED dies are glued onto blue tape to continue post-processing. If auxiliary alignment marks are stamped on the blue tape, post-processing can be performed using some of the LED dies from broken substrates. In this paper, a novel stamper module that can stamp the alignment mark on the blue tape is proposed, designed, and fabricated. In testing, the stamper was reliable even after a few hundred stamps. The module can position the stamp and apply the pattern effectively. By using this module, the LED industry can reduce manufacturing costs.

• Journal of Korean Elementary Science Education
• /
• v.23 no.4
• /
• pp.273-278
• /
• 2004

According to Piaget, children aged 11 are in the middle of concrete operation period and formal operation period. So, it is necessary to adopt the Learning Cycle Model (LCM) which helps students improve their cognitive development. After determining the test for the Science Concept of Matter (SCOM), the experimental group showed higher average than the comparative group in the post-test. In the sound understanding, the experimental group showed higher ratio than the comparative group. And in the ratio of imperfect, wrong understanding and no response, the experimental group was lower than the comparative group. On the questions that were needed the complicated inquiry, many students of both groups still couldn't find the fundamental cause. In forming the scientific conceptualization, there was a meaningful difference (p < .001) after post-test Analysis of Covariance (ANCOVA) with pre-test result. After determining the test for the Test Inquiry Science Process (TISP), the experimental group showed higher average than the comparative group in the post-test. In the category of basic inquiry process which is needed in concrete operation, there was a meaningful difference (p < .05). In the category of unified inquiry process which is needed in formal operation, they showed no meaningful difference (p > .05). Therefore, applying the LCM to the chapter of 'Solution and Dissolving' is more effective on improving the scientific conceptualization and on helping the concrete operation abilities than the teacher centered learning.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.3
• /
• pp.493-506
• /
• 1999

The purpose of the study is to evaluate the effectiveness and competence level of trainees of Cardiopulmonary resuscitation training targeted for nursing students. 70 nursing students of Y nursing college are recruited as subjects from Dec. 1st, 1998 through Dec. 8th. 1998. For the pre-test. demographic data related to CPR and knowledge of CPR were evaluated. For the post-test, the next week of pre-test, three difference groups of subjects were tested their knowledge of CPR. CPR training was designed by two components which were 90 mins lecture and demonstration by one professor and individual practice using two educational models with two professors. As the tool of measurement estimating pre or post knowledge of CPR. questionnaires were developed based on self-diagnosis questionnaires of American Heart Association(AHA). The questionnaires were multiple choices (50 questions) and open end questions regarding CPR process. Each multiple choices questions valued 2 points (Score varied min. 0 point to max 100 points.). Collected data were computerized and analyzed by SPSS-WIN. Frequency and percentage of each questions analyzed. The differences of the knowledge and competency level of subjects between pre and post test was analyses by paired t-test. The followings are research outcome. 1. In the pre-test, 95% of subjects answered that they already knew what CPR was. but only 82% described correctly what CPR was. 49% learned CPR before, and 80s5 of them learned at high school. 2. 37 questions scores increases, and 10 questions scores decreased. 3 questions didnt change their score. After getting training, ratio of 80% correct score significantly increased 4 times. 3. In post-test. knowledge level of trainees increased compared to that of pre-test. (t=-15.075, p=.000) 4. Competence level also increased (t=-14.86, p=.00). In result, after getting CPR training, most CPR knowledge increased except open the air tract, toddler CPR, and alternative behavior when the air tract is blocked. CPR training needs to extend the educational scope not only CPR lecture but also psychomotor skill practice. CPR trainees are in need of appropriate feedback as well as enough opportunities of skill practice.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.67-72
• /
• 2002

The two stage laccase-assisted delignification process led to significant lignin removal in the non-pressurized treatments. It is clearly shown that an alkaline extraction prior to the second laccase treatment significantly increased the overall delignification by ∼15%. This is in line with the contention that the residual lignin has undergone structural changes during the alkaline extraction, and the resulting modified structures are susceptible to the laccase oxidation. In phenolic hydroxyl group, the pre- methylated sample was very responsive to the delignification process. The phenolic hydroxyl groups could be increased during side chain cleavage catalyzed by laccase. This finding demonstrates that the delignification oi etherified structures is an important reaction in the delignificaton by laccase.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.349-355
• /
• 2006

The gas turbine components is used on high temperature conditions which under severely circumstance with start-up and stop several times. Therefore, it is used nickel-base superalloys like and GTD-111DS. Damaged buckets on the t긴ade tip during operating are repaired per 24,000 hr to three times according to repair specification of manufacture. It is applied pre-heat, HIP(hot isostatic pressing) and post-heat treatment to support welding repair on blade tip effectively. On this study, It is utilize of $WRAP^{TM}$ (welding repair advanced process) method to make tension test specimens for this study, And then, material strength and characteristic for GTD-111DS was analyzed.

• Journal of Powder Materials
• /
• v.7 no.2
• /
• pp.63-70
• /
• 2000

Thermal spray coating process has proven to be effective at producing hard, dense, wear resistance coatings on the relatively mild substrates. Among several spraying techniques, HVOF (High Velocity Oxygen Fuel) and plasma coating processes, which are preferentially used for the wear resistance application such as capstans, have been applied in this study. The effects of pre-treatment, it-process and post-treatment parameters on the wear and mechanical properties of WC+12%Co, Cr3C2 and Al2O3 powder coatings have been investigated and correlated with the microstructures. The results indicated that the carbide coating was more preferable to the oxide coatings and the post-treatments consisting of vacuum annealing and sealing on carbide coatings led to significant improvements in wear resistance, adhesive strength and coating phase stabilization over the other processing techniques in this application.

• Journal of Korean Society for Quality Management
• /
• v.46 no.3
• /
• pp.593-606
• /
• 2018

Purpose: The purpose of this study is to examine the Hawthorne effect on healthcare service process innovation, by investing the difference between checklist items of patients and doctors on direct clinical observations (DCO) and the retrospective clinical review (RCR). Methods: The data set consisted of 30 patients and 30 doctors respondents. T-tests were used to perform a comparative analysis of DCO and RCR items between patients and doctors by pre and post examinations. Results: The results indicate that there was a difference between the non-prior notice checklist items of the patients and doctors, while there was no difference of the post-examination checklist items between the patients and doctors. Conclusion: This study provides useful information and can be applied to the improvement of patient experience through healthcare service process innovation. The results of this study also offer practical insights about how hospitals can motivate providers to participate in healthcare service process for improved quality care by the Hawthorne effect. The study contributes to the existing knowledge of the Hawthorne effect for effective strategies for providing quality care.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.176-180
• /
• 2001

There are several factors causing re-work in CMP process such as improper polish time calculation by operator. removal rate decline of the polisher, unstable in-suit pad conditioning, slurry supply module problem and wafer carrier rotation inconsistancy. And conclusively those fundimental reason for the re-work rate increasement is mainly from the cycle time delay between wafer polish and post measurement. Therefore, Wafer thickness measurement in wet condition could be able to remove those improper process conditions which may happen during the process in comparison with the conventional dried wafer measurement system and it can be able to reduce the CMP process cycle time. CMP scrap reduction by overpolish, re-work rate reduction, thickness control efficiency also can be easily achieved. CMP Equipment manufacturer also trying to develop integrated system which has multi-head & platen, cleaner, pre & post thickness measure and even control the polish time from the calculated removal rate of each polishing head by software. CMP re-work problem such as over & under polish by target thickness may result in the cycle time delay. By reducing those inefficient factors during the process and establish of the automatic process control, CLC system need to be adopted to maximize the process performance. Wafer to Wafer Polish Time Feed Back Control by measuring the wafer right after the polish shorten the polish time calculation for the next wafer and it lead to the perfact Post CMP target thickness control capability. By Monitoring all of the processed the wafer, CMP process will also be stabilize itself.