• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.169-176
• /
• 2014

This research discusses the characteristics and the implementation strategies for two types of quality metrics to analyze innovation effects in six sigma projects: fixed specification type and moving specification type. $Z_{st}$, $P_{pk}$ are quality metrics of fixed specification type that are influenced by predetermined specification. In contrast, the quality metrics of moving specification type such as Strictly Standardized Mean Difference(SSMD), Z-Score, F-Statistic and t-Statistic are independent from predetermined specification. $Z_{st}$ sigma level obtains defective rates of Parts Per Million(PPM) and Defects Per Million Opportunities(DPMO). However, the defective rates between different industrial sectors are incomparable due to their own technological inherence. In order to explore relative method to compare defective rates between different industrial sectors, the ratio of specification and natural tolerance called, $P_{pk}$, is used. The drawback of this $P_{pk}$ metric is that it is highly dependent on the specification. The metrics of F-Statistic and t-Statistic identify innovation effect by comparing before-and-after of accuracy and precision. These statistics are not affected by specification, but affected by type of statistical distribution models and sample size. Hence, statistical significance determined by above two statistics cannot give a same conclusion as practical significance. In conclusion, SSMD and Z-Score are the best quality metrics that are uninfluenced by fixed specification, theoretical distribution model and arbitrary sample size. Those metrics also identify the innovation effects for before-and-after of accuracy and precision. It is beneficial to use SSMD and Z-Score methods along with popular methods of $Z_{st}$ sigma level and $P_{pk}$ that are commonly employed in six sigma projects. The case studies from national six sigma contest from 2011 to 2012 are proposed and analyzed to provide the guidelines for the usage of quality metrics for quality practitioners.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.119-130
• /
• 2014

This paper proposes GAPS, a practical genetic algorithm based pathfinding system for conveniently analyzing various networks. To this end, the GAPS is developed through integration of the intuitive graphic user interface for network modeling, the database management system for managing the data generated in modeling and exploring procedures, and a simple genetic algorithm for analyzing a wide range of networks. Especially, previous genetic algorithms are not appropriate for analyzing the networks with many dead-ends where there are few feasible paths between the given two nodes, however, GAPS is based on the genetic algorithm with the fitness function appropriate for evaluating both feasible and infeasible paths, which enables GAPS to analyze a wide range of networks while maintaining the diversity of the population. The experiment results reveal that GAPS can be used to analyze both networks with many dead-ends and networks with few dead-ends conveniently, and GAPS has several advantages over the previous genetic algorithms for pathfinding problems.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.127-135
• /
• 2017

Consumers tend to feel concern about disclosure of personal information and, at the same time, to avoid inconvenience of procedural complexity caused by the privacy protections. The purpose of current paper is to investigate relationships between opt-in procedural complexity and shopping behavior using smart phones, moderating by the amount of visual attentions using eyetrackers. Therefore, we created a virtual mobile Web-site in which the complexity of opt-in procedures in our experiment is manipulated and measured. Also, we measured the dwell-time of area of interest using SMI-RED 250 instrument for tracking the real eye movement. Results indicated that the levels of procedural complexity are related to repurchase, indicating a moderating effect of the amount of visual attentions. Finally, we discussed several theoretical and practical implications of management for mobile commerce.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.242-252
• /
• 1998

The inhabitation environments and growth conditions of Machilus thunbergii community in the Pyonsanbando located at southwestern area in Korea were examined and analyzed to provide some practical data to be used to establish measures for long term succession monitoring, protection and sustainable management. The Machilus thunbergii community are located at Kyokpo-ri, Pyonsan-myon, Puan-gun(35$^{\circ}$35′24"N~35$^{\circ}$ 42′30"N, 126$^{\circ}$28′18"E~126$^{\circ}$40′40"E). Within the Pyonsanbando area the mean temperature is 12.4$^{\circ}C$, the warmth index 101.5$^{\circ}C$.month, the coldness index -12.3$^{\circ}C$ month and the annual precipitation 1,016mm. The soil within the community is silt loam or clay loam and so fertile. 30 species and 1 varieties of 21 families inhabited at the community. There were 18 grown trees and 131 saplings of Machilus thunbergii within the community. The mean basal diameter, mean height, and crown width of grown trees was measured to be 57.4cm, 7.4m and 9.0~9.8m respectively. And 9 trees were full flowering, 2 trees small flowering here and there, and 7 trees non flowering in 1998. The mean branch growth length was 8.3cm, mean leaf area 18.3$\textrm{cm}^2$, mean inflorecence length 9.3cm, mean fertilization 14.5％ and mean seed diameter 7.6mm. Further rich management measure and investigation were recommended such as sapling protection, signboard construction, soil erosion controlling and regular monitoring within the community.

• Korean Journal of Optics and Photonics
• /
• v.26 no.4
• /
• pp.209-216
• /
• 2015

A new method is proposed for optimal management of the fabrication and assembly tolerance of optical systems. The practical utility of the method is shown by applying it to a wide-angle anamorphic IR optical system. In this method the wavefront error of an optical system is expressed in terms of Zernike polynomials, and the sensitivity of the expansion coefficients to the variation of design parameters is analyzed. Based on this sensitivity analysis, the optimal tolerances of the fabrication parameters are determined and the best compensators for the assembly process are selected. By using this method, one can accurately predict with good confidence the best possible performance of a completed optical system in practice.

• The Korean Journal of Health Service Management
• /
• v.11 no.4
• /
• pp.203-211
• /
• 2017

Objectives : This study aims to design a method for drying forceps jars. As part of the process, holes were made in the forceps jars. Drying time, rate of wet pack, and cost of rewashing linen were then determined. Moreover, the study looked into the bacteria incidence rate in the forceps jars. This study suggests a practical way for preventing infection in a hospital through a surgical device. Methods : This study investigated the effect of forceps jars with holes on reducing drying time, rate of wet pack, and cost of rewashing linen. It also looked into the bacteria incidence rate in the forceps jars through a parallel design. Data was collected and analyzed using SPSS version 21. Results : The drying time of a forceps jars was remarkably reduced from $18.44{\pm}0.2$ minutes(non-hole forceps jars) to $0.58{\pm}0.02$ minutes(4-hole forceps jars). The rate of wet pack of non-hole forceps jars was 51.4%. However, the rate of 4-hole forceps jars reached 4.6%. The cost of rewashing linen saw a decline from 38,073 won to 3,381 won. In addition, no bacteria and virus were detected from the 24-hours usage of forceps jars even though the jars had holes. Conclusions : The 4-hole forceps jars greatly increased work efficiency as a result of the reduced drying time, rate of wet-pack and cost of rewashing linen. The 4-hole forceps jars did not influence their sterilizing effect.

• Journal of Internet Computing and Services
• /
• v.18 no.1
• /
• pp.153-160
• /
• 2017

Due to the endeavors and performances of many IT firms, as well as the government supports, the IT capability of Korea was ranked in the top 8th position by Huawei in 2015. Specifically, as far as the wire & wireless network and Internet speed, Korea has taken pride in possessing the competitive advantage. However, many academic and practical experts began to point out the lack of systematic research management on Internet. The purpose of the study is to identify various research issues on Internet and to verify their appropriateness. In addition, the study examined their recent trends and provided the prospect of the future Internet-related researches. Consequently, the finding indicates that the rigorous endeavors and outcomes for each proposed research issue have been resulted in and will be continued. The study anticipates the growing demands of researches in the fields of future network, multimedia application, big data, artificial intelligence, and Internet security.

• Journal of Korean Society for Quality Management
• /
• v.48 no.3
• /
• pp.395-408
• /
• 2020

Purpose: This study was performed for advancement of aviation security equipments certification system. Methods: We investigated aviation security equipments certification-related registrations and the latest research trends of explosive detection technologies. Based on the literature studies, we draw the critical issues of the aviation security equipment certification system and suggested improvement direction. Results: We found some inaccuracies of the definition of explosive trace detection equipments, accreditation review committee, and performance evaluation test method. These problems should be modified to suit being practical. Conclusion: The present results would be useful for basic data for modifying aviation security equipments certification systems.

• Journal of Science and Technology Studies
• /
• v.15 no.1
• /
• pp.281-325
• /
• 2015

In this paper, we continue our previous study on the differences, similarities and interfaces between the various models of scientific governance discussed in STS and those in risk governance developed by risk studies. In the previous paper we illuminated that theoretical differences among STS scholars on scientific governance and public participation goes back to the 1970s and 1980s, during which they first laid down the conceptual basis of STS. In this paper we investigate how these divergent positions among STS scholars influenced their evaluations of precautionary principle and the framework of risk analysis (especially the separation between risk assessment and risk management), which are the two main paradigms in the area of risk regulation. By doing that, this paper will show divergent positions of STS scholars on risk analysis and precautionary principle. Further, we will suggest some theoretical and practical interfaces between STS and risk governance models.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.187-193
• /
• 2008

Nowadays, the study on e semantic web has been actively progressing for processing the web data semantically. For actualizing the semantic web environment, the core task is to build the ontology that defines the concepts and relations between concepts about the all things. Many ontology languages such as OWL, RDF(S), DAML+OIL were developed for building the ontology. And the many ontology tools were also implemented based on them. Although, many language and tools were researched, the practical use of the ontology tools is limited to the experts and researchers about the ontology because of the difficulty of the vocabulary, weak understanding about the ontology theory and the difficulty of the use of the ontology tools. And there are no studies on the reuse of constructed huge ontology. Therefore, in our study we design and implement the OWL ontology management tool that both the ontology experts and general users who want to build the ontologies are able to construct the ontology easily In this paper, we introduce the main modules used in our tool and features of our tool.