• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.35-41
• /
• 2017

The use of engineering plastics in automotive components is increasing with the trend towards improving the car strength and reducing weight. Among the different choices of materials, engineering plastic emerged as the necessary material for achieving lower costs, reduced weight and improved production efficiency. To produce the automotive parts, it is important to predict defect and validation of injection molding prior to design. Injection molding analysis and structural analysis are widely applied as a part of the design process when developing automotive parts. Injection molding analysis, in particular, involves a highly complicated mechanism that requires deep knowledge of polymer properties as well as an analytic approach different from that used for a general isotropic material when the molded material is used as a structural material. This is because the parts made of polymer have pre-stress factors such as intrinsic deformation and residual stress. The most important factors for injection molded plastic products are injection molding condition and cavity design, taking into account ease of molding, mass production and application. Despite optimal injection molding conditions and cavity design, however, glass fiber orientation is critically linked to strength reduction. The application of injection molding and structural coupled analysis provides a low-cost solution for product molding and structural validation, all prior to the actual molding. The purpose of this study involves the validation, pre-study, and solution of defect in injection-molded polymer automotive parts using the simulation software for injection molding and structural coupled analysis. Finally, this thesis provides validation of an injection molding and structural coupled analytic mechanism that can demonstrate the effect of glass fiber orientation on mechanical strength. Design improvement ideas for the injection molded product of PPS (Poly Phenylene Sulfide)+40% glass fiber are also suggested.

• Journal of Korean Physical Therapy Science
• /
• v.2 no.2
• /
• pp.495-508
• /
• 1995

The purpose of this study was to determine the effects of high voltage pulsed current (HVPC) stimulation on wound healing. Thirty-four Sprague-Dawley adult female rats were assigned to experimental and control groups. Each rats were anesthetized with pentotal sodium, and a 10 mm full-thickness incision was made on the back. From 24 hours after surgery, the rats of experimental groups were stimulated with HVPC, $140{\mu}s$, 120 pps, 30-40 V for 30 minutes, daily. The rats were sacrified 2 days, 4 days and 6 days after stimulation, respectively. The skin was removed, and processed for light microscopic examination. The length of incisional wounds were measured by microcaliper, and nucleolar organizer regions were counted under light microscope. For the histological observations the specimens were stained with Hematoxylin and Eosin, Masson Trichrome, Gomori Reticulum and Ag-NOR. There was a significant decrease in the length of incisional wound in experimental group compared with control group at 6 days HVPC stimuation (p<0.05). In experimental group, wound were significant difference (p<0.01) between the duration of post surgery. The mean numbers of nucleolar organizer regions per nucleus were significantly increased in the experimental group at 6 days HVPC stimulation (p<0.05), and were significantly difference (p<0.01) between the duration of post surgery in experimental group. Histological examination of the wound site suggested a more rapid of epithelialization and collagen formation between experimental groups compared with control groups. The result may indicated that the HVPC with $140{\mu}s$, 120 pps, 30-40 V for 30 minutes promoted surgical wound healing in the rat.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1361-1366
• /
• 2010

This research aims to develop polymer composites which can be used for PEMFC separators by injection molding process. Considering the moldability and stiffness, we used PPS(Poly(phenylene sulfide)) and PP(Polypropylene) as base resin. In order to improve electrical conductivity and physical properties, we chose glass fiber, carbon fiber, carbon black, and both expanded graphite and synthetic graphite. The 3 type composites are prepared for injection molding of PEMFC separators. and CAE(Computer Aided Engineering) analysis was conducted to optimize injection processing parameters(injection pressure, heat time, mold temperature etc.). We did successfully fabricate the separators by injection molding, and measure the electrical conductivity of the samples by using four point probe device. Conclusively, PP/SG/CB composite showed better both electrical conductivity and moldability than the others.

• IMMUNE NETWORK
• /
• v.5 no.4
• /
• pp.215-220
• /
• 2005

Background: Transforming growth factor-${\beta}$ (TGF-${\beta}1$) directs class switch recombination (CSR) to IgA isotype, which is a predominant antibody in mucosal surfaces. Although IgA is preferentially committed in mucosal lymphoid tissues, it is not definitely established whether hallmarks of IgA CSR such as IgA germ-line transcripts (GLT ${\alpha}$), post-switch transcripts (PST ${\alpha}$) and circle transcripts (CT ${\alpha}$) are readily expressed in such tissues. Therefore, we compared the expression of these transcripts among mouse Peyer's patches (PP), mesenteric lymph nodes (MLN), and spleen. Methods: Levels of GLTs, PSTs and CTs were measured by RT-PCR in isolated PPs, MLNs and spleen cells. Results: GLT ${\alpha}$ and PST ${\alpha}$ were well expressed in PP and MLN cells but in spleen cells. Similar patterns were observed in the expression of GL ${\gamma}$2b and PST ${\gamma}$2b. On the other hand, these transcripts were only inducible in spleen cells upon stimulated with LPS and TGF-${\beta}1$. In addition, CT${\alpha}$ and CT${\gamma}$2b were detected in PP cells. Conclusion: PP B cells readily express IgA GLT, PST, and CT. Overall expression patterns of these transcripts were similar in MLN cells. Thus, these results suggest that microenvironment of PP and MLN influences spontaneous IgA CSR, which lacks in systemic lymphoid tissues such as spleen.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.12
• /
• pp.511-517
• /
• 2006

The key issues in high power, high energy applications such as electromagnetic launchers include safety, reliability, flexibility, efficiency, compactness, and cost. To explore some of the issues, a control scheme for a large current wave-forming was designed, built and experimentally verified using a 2.4MJ pulse power system (PPS). The PPS was made up of eight capacitors bank unit, each containing six capacitors connected in parallel. Therefore there were 48 capacitors in total, with ratings of 22kV and 50kJ each. Each unit is charged through a charging switch that is operated by air pressure. For discharging each unit has a triggered vacuum switch (TVS) with ratings of 200kA and 250kV. Hence, flexibility of a large current wave-forming can be obtained by controlling the charging voltage and the discharging times. The whole control system includes a personal computer(PC), RS232 and RS485 pseudo converter, electric/optical signal converters and eight 80C196KC micro-controller based capacitor-bank module(CBM) controllers. Hence, the PC based controller can set the capacitor charging voltages and the TVS trigger timings of each CBM controller for the current wave-forming. It also monitors and records the system status data. We illustrated that our control scheme was able to generate the large current pulse flexibly and safely by experiments. The our control scheme minimize the use of optical cables without reducing EMI noise immunity and reliability, this is resulting in cost reduction. Also, the reliability was increased by isolating ground doubly, it reduced drastically the interference of the large voltage pulse induced by the large current pulse. This paper contains the complete control scheme and details of each subsystem unit.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.162-170
• /
• 2013

In recent years, the interests and needs of the Pedestrian Protection System (PPS), which is mounted on the vehicle for the purpose of traffic safety improvement is increasing. In this paper, we propose a pedestrian candidate window extraction and unit cell histogram based HOG descriptor calculation methods. At pedestrian detection candidate windows extraction stage, the bright ratio of pedestrian and its circumference region, vertical edge projection, edge factor, and PCA reconstruction image are used. Dalal's HOG requires pixel based histogram calculation by Gaussian weights and trilinear interpolation on overlapping blocks, But our method performs Gaussian down-weight and computes histogram on a per-cell basis, and then the histogram is combined with the adjacent cell, so our method can be calculated faster than Dalal's method. Our PCA reconstruction error based pedestrian detection candidate window extraction method efficiently classifies background based on the difference between pedestrian's head and shoulder area. The proposed method improves detection speed compared to the conventional HOG just using image without any prior information from camera calibration or depth map obtained from stereo cameras.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.2 no.2
• /
• pp.1-12
• /
• 2004

The purpose of this study was to determine the effect of muscle fatigue by neuromuscular electrical stimulation(NMES). Using Biodex System 3PRO(Biodex Medical Systems Inc, USA), experiment was conducted as to the normal group(I) composed of fifteen adults and the patient group(II) composed of fifteen patients with spastic hemiplegia. As to each group, maximal tolerated intensity(MTI) and maximal tolerated isometric contraction(MTIC) in electric currents yielded by low rate(20 pps) and high rate(100 pps) neuromuscular electrical stimulation and the aspects of decrease and restoration of the isometric contraction were examined, and their strength decrement index(SDI) and strength recovery index(SRI) were also calculated. 1. As for MTI in NMES, the MTI of the group II was higher than that of the group I in both low rate and high rate NMES. In comparison within group, MTI of group II was significantly higher in high rate NMES rather than in low rate NMES(p<0.05). 2. In comparison of MTIC between groups, the group I showed higher in both low rate and high rate NMES. In comparison within group, MTIC of group II was significantly higher in high rate NMES rather than in low rate NMES(p<0.01). 3. As for SDI, both groups showed highest SDI in high rate NMES, but no significant differences could be observed. 4. As for SRI, both groups showed significantly low SRI in low rate NMES(p<0.01, p<0.05), and comparison between groups showed no significant differences could be observed. These result lead us to the conclusion that muscle fatigue was influenced by frequency, high rate NMES was lower at SDI and higher at SRI on compare to low rate NMES, therefor, a further studies concerning electrical stimulation should consider differences each frequency in response to treatment.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.46-53
• /
• 2008

Ultrasonic C-scan technique is one of very popular techniques being used for detection of flaws in polymer matrix composite(PMC). However, the application of this technique is very limited for evaluation of defects in PMC fabricated by the automated fiber placement process. The purpose of this study is to develop a novel ultrasonic hybrid system based on nondestructive and non-contact ultrasonic techniques for evaluation of delamination in carbon/epoxy and carbon/PPS composite laminates. It was shown that the newly developed ultrasonic hybrid system based on dual air-coupled pitch-catch technique with ultrasonic scattering reflection concept could provide excellent image with higher resolution of delamination in PMC compared with the conventional pitch-catch method. It is expected that this ultrasonic hybrid technique can be applied for on-line inspection of flaws in PMC during the fabrication process.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.87-93
• /
• 2011

A threat of the EMP(Electromagnetic Pulse) is recently increasing, so the development of electromagnetic security technology against the EMP is needed. However, the state of the domestic electromagnetic security technology against the EMP is lower level than the foreign. In this paper, the bounded-wave EMP simulator antenna for the development of electromagnetic security technology against a threat of the EMP is designed. The structure of the designed antenna is from a sort of the basic form of the bounded-wave EMP simulator such as a parallel-plate simulator for testing EMP immunity performance within the EUT(Equipment Under Test). The design processes of the designed simulator is including wave launcher, transmission line and termination taper. In the working volume of the designed antenna, the test object within 30 cm is forming predominant TEM field, so it is confirmed that the designed EMP simulator antenna can be used as the EMP simulator.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.127-146
• /
• 2016

The most presentative case would be functional evolution of webtoon as a contents business model, which has taken a initiating role in both innovated strategic experiments and outcomes. Most of all, There are the launch of PPS(Page Profit Sharing) sevice in NAVER webtoon, the paid service model implementation in KAKAOpage and potential business as an exclusive application in Lezhin entertainment This study to analyze these phenomina and results can figure out how the business model in the webtoon platform is developed in various fields diversely and what makes this model evolved and extended. Especially, the diversification of the webtoon platform has been received attention since it pursued the grouped spin off through horizontal convergence and transformational expansion among similar platforms, and also this shows that which factors enhance these phenomina to be controled and expanded. On the basis of the result of this study, we try to find the way to connect business vision of the domestic webtoon platform with affiliated business. Furthermore, it proposes the interrelationship between this and the business strategy for overseas in the globalized platform.