• Journal of Ship and Ocean Technology
• /
• 제9권1호
• /
• pp.1-10
• /
• 2005

The procedures of model test and performance prediction for the CRP-POD propulsion ships, are studied. At the CRP-POD system, which are highly applicable to ultra large container carriers, RPM ratio of two propellers is not fixed, unlike conventional CRP system, and hence the power of each propeller must be predicted respectively. In this paper, a CRP-POD system is designed for 10,000 TEU class ultra large container carriers, and the characteristics of the CRP-POD system are experimentally studied. Finally, based on this study, the procedure of powering performance evaluation for CRP-POD propulsion ships is suggested. However, further studies on quantitative correction of the present procedure are required.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.61-70
• /
• 1982

The hydrodynamic effects on resistance and propulsive performance were studied by using the data from model test and full scale speed trials. A series of model tests on 3 geosims for a 60,000 DWT Bulk Carrier was conducted at KIMM's Ship Experimental Towing Tank and the results analyzed by 1978 ITTC Performance Prediction Method show the correlation between 3 geosim models. Also powering data of full scale speed trials were analyzed by the newly developed computer program and the correlation analysis between ship and model was studied.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.278-291
• /
• 2021

This paper applies load variation method to predict speed-power-rpm relationship along with propulsive performances in regular head waves, and to derive overload factors (ITTC, 2018). 'Calm-water tests' and 'resistance test in waves' are used. The modified overload factors are proposed taking non-linearity into consideration, and applied to the direct powering, and resistance and thrust identity method. These indirect methods are evaluated through comparing the speed-power-rpm relationships with those obtained from the resistance and self-propulsion tests in calm water and in waves. The objective ship is KVLCC2. The load variation method predicts well the speed-power-rpm relationship and propulsion performances in waves. The direct powering method with modified overload factors also predicts well. The resistance and thrust identity method with modified overload factor predicts with a little difference. The direct powering method with overload factors predicts with a relatively larger difference.

• 대한조선학회논문집
• /
• 제32권2호
• /
• pp.68-74
• /
• 1995

선박의 초기설계 단계에서 저항 추진 성능을 손쉽고도 정확히 추정하기 위해 통계해석 기법을 유용하게 사용하고 있다. 본 연구에서는 저항추진 성능 추정 프로그램에 필요한 기능들과 데이터뱅크의 구조를 제안하였다. 개발된 프로그램에는 저항 추진 계수를 추정하기 위한 여러 가지 도표와 회귀식이 포함되어 있으며, 데이터 뱅크를 이용한 일관회귀분석도 포함되어 있다. 또한 프로펠러 주요치수와 단독효율을 추정하기 위한 프로펠러의 간략한 설계 과정도 포함되어 있다. 프로그램의 기능과 데이터 뱅크의 정도를 검증하기 위해 임의의 선형 14 척에 대한 추정을 수행하였으며, 5% 이내의 좋은 추정 정도를 보여주고 있음을 확인하였다.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2356-2366
• /
• 1996

High-power electronic chips have been advanced to such an extent that the heat dissipation capability of a system design has become one of the primary limiting factors. Therefore, thermal design must be considered in the early stage of the electronic system development. In present paper, the results of an experimental study on the forced convection cooling are presented to evaluate cooling performance of an electronic cabinet which in generally used for telecommunication system. Temperatures and thermal resistances are applied to compare the heat transfer characteristics for various locations of a fan unit as well as various configuration of non-uniform powering modules. As a result, the optimal configuration of a fan unit and powering configuration is suggested for the effective thermal design of telecommunication system.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권2호
• /
• pp.113-120
• /
• 2019

We have developed 1 kW-class PEMFC-battery hybrid system independently powering to the building, through the process of system design, current load characteristics analysis, power system configuration for demonstration site and performance evaluation. In order to use the fuel cell and battery as the hybrid type, a control technology for the charging/discharging decision and charging speed of the battery is required rather than using fuel cell. Also output power distribution between PEMFC and the battery is a core of energy management technology. It is confirmed that it is possible to supply independently 1kW powering the building to ensure optimal energy management through the power control experiment of the hybrid system.

• Journal of Ship and Ocean Technology
• /
• 제6권2호
• /
• pp.23-36
• /
• 2002

This paper describes the powering, seakeeping and maneuvering performances for a 2,500-ton class trimaran. Influence of the side-hull forms and location of those in longitudinal and transverse direction to resistance performance was systematically investigated by a series of model tests and numerical calculations. It was found that the longitudinal location of side-hulls was the most influential design parameter to the resistance performance of the trimaran and the optimum location of side-hull depends on ship speeds. When the side-hull stem is located near the primary wave hollow generated by the main hull, the trimaran shows the best resistance performance. Powering performance of the trimaran is superior to those of similar mono-hull ships. Seakeeping model tests for the trimaran were executed and the results were compared with the theoretical results of a similar mono-hull ship. Generally speaking, seakeeping performance of the trimaran is superior to that of a mono-hull ship. In particular, pitching and rolling performance of the trimaran is excellent, which is due to the increased length and breadth. Maneuvering model tests using a HPMM equipment were executed to evaluate the maneuvering performance of the trimaran. Maneuvering simulation was performed using the maneuvering coefficients from the model tests. The results show that the control ability of heading angle and the direction keeping stability of the trimaran is excellent, even though the turning performance is rather worse compared to those of a similar mono-hull ship.

• Journal of Ship and Ocean Technology
• /
• 제9권2호
• /
• pp.29-36
• /
• 2005

A hull form of Baltic ice class IA Aframax tanker has been developed taking into consideration of powering performance in brash ice channels based on IA class rules. Speed performance of the ship hull form in normal seagoing has been validated through model tests in a towing tank. The hull form design developed in this work has demonstrated good speed performance in normal seagoing although the ship design is entitled to ice class IA.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.298-302
• /
• 2016

Currently, logistics are in small quantities and in diverse forms, and the amounts are continuously increasing. Railway logistics however are losing their market share every year mainly due to low operation speed and loading time, which means the trucks are covering the most of the freights. In order to solve these situations, this paper proposed the high speed freight train as working multi-modality with other modes to make effective transshipment. The high speed freight train has maximum operation speed of 300km/h and electric power to run centralized power supply. There are large dual door system, bogie system covering fluctuating load of 15[ton], automatic loading device, ULD(unit load device) bed and ULD locking system in this freight rolling stock. We calculated the performance of powering and braking capacity for this train and proposed how many vehicles are composed of train set. The results in this paper can help to make a decision to define the technical specification of High-speed freight train for the efficiency of rail freight service.

• 한국항해항만학회지
• /
• 제47권6호
• /
• pp.305-314
• /
• 2023

본 연구에서는 연안 및 항만 내에서 운항이 빈번한 총톤수 9.77톤급 소형어선을 대상으로 구속모형시험을 수행하고, 선속 별 운항성능을 추정하였다. 연안 및 항내에서는 소형 어선이 주로 중저속 운항함을 고려하여, 구속모형시험은 8노트 이하에서 수행하였다. 실선을 1/3.5 축소한 모형선을 대상으로 선형예인수조의 프로펠러 단독특성, 저항, 자항추진 시험을 통하여 실선 선속 별 저항추진성능을 추정하였다. 그리고 타 단독특성, 3자유도 정적 및 동적 HPMM 시험을 수행하고 수평면 운항모델 내 유체력 미계수들을 도출하였다. 특히 사항 및 순수선수동요시험은 2~8노트 영역에서 수행되었고, 주요 선형 유체력 미계수들이 선속에 따라 현저하게 변화함을 파악하였다. 선형 유체력 미계수들을 Froude 수에 대한 함수화 한 후, 선속 별 시뮬레이션을 통하여 대상 어선의 조종성능을 검토하였다.