• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.109-110
• /
• 2011

현재 가정 및 사무실 사용전력 가운데 실제 이용되지 않고 전자기기의 대기상태에서 버려지는 대기소모 전력이 5~10 %에 이르는 것으로 보고되고 있다. 이를 줄이기 위한 노력이 선진국들뿐만 아니라 국제적 차원에서 경주되고 있다. 우리나라도 가전기기 및 산업기기의 자동화 및 on-line화에 따른 대기 소모 전력이 점차 증가하고 있어 전기에너지 낭비의 큰 요인이 되고 있을 뿐만 아니라, 온실가스 배출량을 감축하려는 국제협약에도 배치된다. 따라서 대기전력을 줄이기 위한 범국가적인 제도적 기술적 노력을 필요로 한다. 본 논문에서는 대기전력절감기술 및 최근 국제동향과 대기전력 차단 장치의 무선화를 기술하였다.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.1
• /
• pp.27-34
• /
• 2001

On 16Dec. 1999, It was 100 years since the opening the first railroad section of 33.2km on Sep. 1899, Korea High Speed Railroad had a successful trial run of 200km/h on test track section. And the test speed 300km/h was achieved an 28 June 2000 during continuous commissioning. In the 21st century, the High Speed Railroad will be opened commercially in Korea and will contribute to technical development. Now, it is necessary to re-evaluate the role of railroad in modern society and to activate the railroad system. Ultimately, the competitive power of nation will be strengthened with energy saving, reduction of pollution and transportation cost. It conclusion the railroad system have to be expaned about 50% of total transportation to make preparations for reopening of Eurasia silk route through KyungEu railroad connection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2536-2543
• /
• 2013

In this paper, we proposed the modeling in one zone buildings and the energy efficient temperature control algorithm using particle swarm optimization (PSO). A control horizon switching method with PSO is used for optimal control, and the TOU tariff is included to calculate the energy costs. Simulation results show that the reductions of energy cost and peak power can be obtained using proposed algorithms.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.745-747
• /
• 2004

배터리 파워는 모바일 애드 혹 네트워크(Mobile Ad hoc Network)에서 중요한 리소스이다. 기존의 라우팅 알고리즘에서는 노드의 파워를 on-off 시키는 방법으로 파워를 관리해왔다. 본 논문에서는 DSR (dynamic source routing)에서 route discovery, route maintenance를 할 때 각 노드의 배터리 파워 레벨을 고려하여 파워 레벨이 낮은 노드들은 RREP packet을 보내지 않음으로써 소스에서 데스티네이션까지의 경로를 오래 유지시킬 수 있고, 또한 파워 레벨이 높은 하나의 노드에 트래픽이 집중되지 않도록 하기 위해 큐(queue)에 담겨있는 트랜스미션패킷과 리시브 패킷의 수까지 고려하여 경로를 설정한다. 이 알고리즘을 이용함으로써 각 노드의 파워를 효율적으로 관리함은 물론, 전체 네트워크의 load 균형을 맞춤으로 네트워크의 수명을 길게 할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.889_890
• /
• 2009

Design of high efficiency Switched Reluctance Motor (SRM) for Low Speed Electric Vehicle (LSEV) is presented in this paper. The design is made from point of view to save more used energy for operating LSEV. Focus on saving the energy gives more efficiency can be produced. Based on applying suitable driving cycles and investigates the frequently power used are foundation to design the proposed motor. Meanwhile through Finite Element Analysis (FEA) characteristic of the proposed motor such as inductance and torque profile can be obtained.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.708_709
• /
• 2009

The small wind turbines under a few kW grades has the merits of setting up with low costs by individuals, and get the energy saving effects that, it has the secured, separate markets from the big range systems, and the developing of it is continuously proceeding. The objective of this paper is to provide the design characteristics analysis of a dual-rotor, ironless, Radial Flux Permanent Magnet(RFPM) machines for small wind turbine. This thesis is aiming mainly analyzing the characteristics of the output power of the Prototype to verify through the theoretical study and tests. The results reveal an indication of the machine best suited with respect to performance criterion for a particular design requirement.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1713_1714
• /
• 2009

본 연구는 LED 광원을 이용한 절전형 라인 조명제어장치의 개발에 관한 것이다. 기본 광원은 5W급 고휘도 LED Lamp를 기본적으로 1~5개의 개별 램프를 제어하며 LED Lamp의 불량상태와 운전상태 감시를 위한 정전류 방식의 구동 기능을 포함하고 여러 단계의 밝기 변화와 절전, 방열을 고려하여 PWM 방식으로 구동 밝기조절 및 점멸 주기 제어기능을 갖는다. 이장치는 도로의 라인조명용 단위장치로 구성될 수 있으며 개별적으로 중앙통제시스템과 통신제어기능을 수행할 수 있게 구성된 시스템이다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.1
• /
• pp.92-99
• /
• 2003

Bevel gears are important mechanical parts to transmit power in transportation system high precision parts like bevel gears might be manufactured by closed die forging process for dimensional accuracy. Closed die forging of bevel gears offers the high quality and good mechanical properties and also leads to considerable cost saving. To determinate the proper closed-die forging process for bevel gear forms, three-dimensional finite element simulation for the progressive forging process was earned out and also the simulation results were compared with experimental results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.81-88
• /
• 2013

Recently, energy-saving technology is rapidly becoming a crucial issue for mankind due to the depletion of natural resources. From this perspective, every automobile manufactures are trying to develop light materials and to validate safety with environmental consideration. In this study, we developed clutch connector tube which is the parts of power transferring clutch with light materials to substitude for existing general steel materials. We also verified that the general steel materials can be replaced with nylon, fiberglass, stainless and plastic materials or not. As a result, we verified that the mixture of glass and nylon composite material can substitude the general steel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1159-1163
• /
• 2014

This paper have been dealt with the analysis for energy efficiency improvement effect of unity storage capacity as a part of the energy storage application study to improve energy efficiency in the electric railway systems. Especially, in order to estimate the amount of energy saving according to the variation of power capacity of each storage, the current limit module was mounted on an existing DC electric railway loadflow program which is based on the analysis model for railway system and storages, and combined optimization algorithm to determine optimal voltage boundary.