• 한국통신학회논문지
• /
• 제29권8A호
• /
• pp.868-878
• /
• 2004

본 논문에서는 멀티미디어 트래픽을 효율적으로 서비스하기 위해 CDMA 순방향 링크에 제안되었던 Zone-based 전력제어 방식(1)의 역방향 링크 적용 타당성을 검증 및 분석하였다. Zone-based 전력제어 방식을 운용하기 위해서는 각 트래픽 채널에 할당되는 최대 전력량이 결정되어야 한다. 순방향 링크에서는 기지국의 전력 자원을 다수의 트래픽 채널이 공유하기 때문에 각 트래픽 채널에 할당 가능한 최대 전력 자원을 결정하는 메커니즘이 요구되지만, 역방향 링크에서는 서비스 단말별로 전송되는 트래픽 채널에 할당 가능한 최대 전력 자원이 결정되어져 있는 특성으로 인해 Zone-based 전력제어 방식이 쉽게 구현될 수 있다. 실험 결과는 Zone-based 전력제어 방식이 기존의 전력제어 방식에 비해 전력 소비량과 이동국의 트래픽 성능에 있어서 향상된 결과를 보여주었다. 결국 Zone-based 전력제어 방식은 멀티미디어 트래픽 환경에서 고속 데이터호의 서비스 반경을 셀의 전체 서비스 반경으로 확보할 수 있게 하고, 시스템 내에 생성되는 간섭 량을 억제하여 저속 음성호의 QoS도 적절히 보장해줄 수 있는 방안임을 확인하였다.

• 전력전자학회논문지
• /
• 제20권6호
• /
• pp.540-549
• /
• 2015

Unintentional islanding results in safety hazards, reliability, and many other issues. Therefore, the islanding detection of a power conditioning system of a distributed generation, such as a grid-connected photovoltaic inverter, is a key function for standard compliance. Currently, many anti-islanding schemes have been examined, but existing anti-islanding schemes have poor power quality and non-detection zone issues. Therefore, this study analyzes the non-detection zone in a more deliberate manner than the existing analysis of the non-detection zone and proposes a new anti-islanding scheme, which has negligible power quality degradation and no non-detection zone. Simulation and experimental results validate that the proposed scheme shows much better performance than other existing schemes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.641-643
• /
• 2004

Liquid Zone Control System controls the power of heavy water reactor. Changing the level of each zone compartment regulates one local zone power of 14 zone powers, iud the level is limited less than 90% by the control algorithm to prevent the flood. In recent years, the level and the power was controlled oscillatory in the upper zones. To find out the condition of cycling, the zone control system was modelled with the linear difference equations and identified using parameter estimation. The pole-zero plot showed that the major pole was near the stability boundary, and the system had oscillatory characteristics in nature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1452-1454
• /
• 2002

Large turbine generator(rated 22kV) has failed in the stator winding area during normal operation. The capacitance and tan${\delta}$ were measured by Schering bridge in the zone 1, 2 and zone 3-6 stator windings. The capacitance and tan${\delta}$ in the zone 1, 2 of stator winding were higher than those of zone 3-6 in the stator winding. Experiments on microstructure property were conducted in the zone 1, 2 and zone 3-6 insulations, which were drawn out from stator windings of the large turbine generator. Microstructure analysis was characterized using scanning electron microscope(SEM). SEM results indicated that several isolated delaminations occurred at the interface of mica/epoxy insulations. Both thermal and mechanical aging cause the delamination.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.219-226
• /
• 2016

In this paper, adaptive home power peak-cut control system is developed using PLC. The developed scheme provides monitoring of power usage, power peak-cut control and additional function. In test bed, zone is presented by bedroom, living room, kitchen and bathroom. And individual load is presented by lighting, heater and fan in zone. In developed scheme, zone control is implemented by single PLC modem. And individual load control is implemented by key-map table. In addition, power peak-cut control system S/W, which can perform setting of power peak, power peak-cut control and monitoring of power usage.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2303-2310
• /
• 2009

Defense systems are needed to prevent catastrophic failures of a power grid due to cascaded events. Cascaded events can be attributed to improper operations of protective relays. Especially, it is the most dangerous problem that trips of backup relays by overload. In this paper, a new algorithm of predicting Zone 3 acting time of distance relay is proposed using the real time synchronized data from PMUs on the transmission system when the power system is danger. In the proposed, some part of the power system are outage when some unexpected fault in the power system, the algorithm will monitor the impedance locus of distance relay. At this time, if there is a big change of Impedance locus, the algorithm will calculate the Zone 3 acting time of the distance relay by the over load. In the case studies, the estimation and simulation network have been testified and analysed in Matlab Simulink.

• 소성∙가공
• /
• 제18권5호
• /
• pp.385-391
• /
• 2009

An adhesively bonded power steering cylinder with a steel tube and an aluminum bracket was developed to reduce the weight of steering systems. To achieve the joint strength between the steel tube and of the aluminum bracket, the shape aluminum bracket re-designed by using the FE-analysis. Fracture behavior of the adhesive layer was considered by a cohesive zone model(CZM), which is based on the two-parameter fracture phenomenon with critical stress and fracture toughness. From the result of FE-analysis with CZM, re-designed power steering cylinder satisfied the desired joint strength for axial and torsion modes. And its joint strength was verified by the fracture test in each mode.

• Journal of Welding and Joining
• /
• 제33권3호
• /
• pp.54-61
• /
• 2015

In this study, effect of laser power on hardness and microstructure of SKD61 Hot Die steel of which surface was melted and hardened with Yb:YAG disk laser was investigated. Beam speed was fixed at 70 mm/sec and distance between them was 0.8 mm about Laser surface melting. The only thing that was changed laser power. Laser powers were 2.0, 2.4 and 2.8 kW. No defect was found under all conditions. As the laser power increased, the penetration depth were deepened and the bead width was also widened. There was no hardness deviation of fusion zone at same laser power and it was higher than that of heat affected zone. In addition, the more laser power increased, the more hardness in fusion zone decreased. Fusion zone was macroscopically dendrite structure. However, core matric in dendrite was lath martensite of 100 nm size. There were $M_{23}C_6$ of 500 nm and the VC and $Mo_2C$ of a nano meters on boundary of dendrite.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.62-69
• /
• 2004

The objective of this study is to estimate the distribution of a zone disturbed by excavation (EDZ) around tunnels that have been excavated at about 500 m depth in pre-Tertiary hard sedimentary rock. One of the most important tasks is to evaluate changes in the dynamic stability and permeability of the rock around the tunnels, by investigating the properties of the rock after the excavation. We performed resistivity and acoustic tomography using two boreholes, 5 m in length, drilled horizontally from the wall of a tunnel in pre-Tertiary hard conglomerate. By these methods, we detected a low-resistivity and low-velocity zone 1 m in thickness around the wall of the tunnel. The resulting profiles were verified by permeability and evaporation tests performed at the same boreholes. This anomalous zone matched a high-permeability zone caused by open fractures. Next, we performed resistivity monitoring along annular survey lines in a tunnel excavated in pre-Tertiary hard shale by a tunnel-boring machine (TBM). We detected anomalous zones in 2D resistivity profiles surrounding the tunnel. A low-resistivity zone 1 m in thickness was detected around the tunnel when one year had passed after the excavation. However, two years later, the resistivity around the tunnel had increased in a portion, about 30 cm in thickness, of this zone. To investigate this change, we studied the relationship between groundwater flow from the surroundings and evaporation from the wall around the tunnel. These features were verified by the relationship between the resistivity and porosity of rocks obtained by laboratory tests on core samples. Furthermore, the profiles matched well with highly permeable zones detected by permeability and evaporation tests at a horizontal borehole drilled near the survey line. We conclude that the anomalous zones in these profiles indicate the EDZ around the tunnel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권6호
• /
• pp.730-736
• /
• 2014

선박 운항에 필요한 전기 전자 장비에 대한 시험 규격은 IEC-60533 규격을 적용하고 있으나 선교구역, 일반전원 분배구역에 대한 규제치만 제시하고 있으며 특별전원 분배구역에 대한 별도의 규제치가 정립되어 있지 않다. 이로 인하여 특별전원 분배구역에 설치되는 각종 장비 대하여 과도한 사양을 요구하고 있는 실정이다. 본 논문에서는 실선에서 특별전원 분배구역에서의 전원 잡음을 측정하였고 일반전원 분배구역의 규격과 실선에서 측정한 값 들을 비교 분석 하였다. 실제 측정한 실선 한바다 호에서는 저주파 대역 160kHZ대역에서 6~8dB의 차이가 나타났고 고주파 1.97GHz대역에서 약 8.7dB의 차이를 보이고 있다. 또한 한나라 호에서 측정된 측정값은 1MHz, 11MHz, 25MHz에서 4~5dB 정도 ICE-60533의 기준과 차이를 나타내고 있다. 따라서 더 많은 실험을 한 후 자료를 비교 분석하여 특별전원 분배구역의 규격이 지정 되어야 할 것이다.