• International journal of advanced smart convergence
• /
• 제13권3호
• /
• pp.267-272
• /
• 2024

Bicycles and electric bicycles, which are short-distance vehicles, do not generate exhaust gases that cause environmental pollution. Rather, they are in the spotlight because they have exercise effects that help the health of the human body while operating the bicycle. Power-trains of bicycle have traditionally used chains and sprockets, and they still have the largest market share. In the previous study, a new type of bicycle power-train was proposed. The power transmission medium of the proposed power-train device employs a belt. The core of the proposed new bicycle power-train is the configuration of the pulley. The core component of the proposed power-train pulley is a spline. In this study, the basic shape of the proposed power-train model and the basic role and design principles of the spline used in the configuration of the model were studied. The target splines are linear spline used for the central axis of the power-train pulley and helical spline for shifting. The linear spline is a basic shape, and the helical spline is an equation that can calculate the inclination angle and the shift range.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.116-122
• /
• 2000

This paper presents a simulation method with constant power model for the train load. In power system simulation loads could be modeled as a constant power, constant current, constant Impedance or a function of voltage and frequency. At this time, however, representing a train load as the function is difficult because of the lack of data. Therefore as a first step, simulation method with a constant power model fer a train is studied, and the test result is compared with the simulation result using the constant Impedance model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1352-1354
• /
• 2004

The accurate analysis on railway traction power system should be carried out a load forecast preferentially. Commonly, it has been performed through Train Performance Simulator (TPS). In the study focused on velocity or location of train, however, the electric power consumption have been computed by converting mechanical power according to given velocity. Therefore, this paper presents a development of a mathematical model for electric load. The proposed load model is expressed as polynomial to reflect the influence of variance of train speed, that is, the model expresses the power as a function of train speed. in this study, method of the least squares method is used to find each coefficient and field test is performed to acquire data, electric power and speed of train in commercial running line.

• Wind and Structures
• /
• 제20권2호
• /
• pp.143-168
• /
• 2015

A numerical model for analyzing air-train-track interaction is proposed to investigate the dynamic behavior of a high-speed train running on a track in crosswinds. The model is composed of a train-track interaction model and a train-air interaction model. The train-track interaction model is built on the basis of the vehicle-track coupled dynamics theory. The train-air interaction model is developed based on the train aerodynamics, in which the Arbitrary Lagrangian-Eulerian (ALE) method is employed to deal with the dynamic boundary between the train and the air. Based on the air-train-track model, characteristics of flow structure around a high-speed train are described and the dynamic behavior of the high-speed train running on track in crosswinds is investigated. Results show that the dynamic indices of the head car are larger than those of other cars in crosswinds. From the viewpoint of dynamic safety evaluation, the running safety of the train in crosswinds is basically controlled by the head car. Compared with the generally used assessment indices of running safety such as the derailment coefficient and the wheel-load reduction ratio, the overturning coefficient will overestimate the running safety of a train on a track under crosswind condition. It is suggested to use the wheel-load reduction ratio and the lateral wheel-rail force as the dominant safety assessment indices when high-speed trains run in crosswinds.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1327-1331
• /
• 2004

In this paper constant power models for electric trains have been used to analyze the steady states of the AT feeding systems. There are some previous studies utilizing constant impedance models or constant current models. These mentioned models are easy to use, but even so they don't yield exact results because of the innate restraints of the models since linear models cannot represent the characteristic of constant power in inverter-driven trains. It is reasonable that the train be considered as a constant load model when it drives or as a constant source model when it applies regenerative brake. Nonlinear equations which reflect constant power model for train have been developed by considering mutual impedances between wires and AT's turn-ratio of 1:1, then these equations have been solved by N-R iterative method. The proposed method doesn't need any specific assumptions through either the process of developing equations or the process of acquiring solutions, so it can be said to be stricter than other conventional methods.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.652-656
• /
• 2006

Constant load model is widely used for an electric train to perform the static analysis of AT (Auto Transformer) feeding systems. In this model, the train will be considered as a constant load model when it drives or as a constant source model when it applies regenerative brake. However there must be some constraints imposed on the pantagraph voltage in actual operations. These constraints are established for the reason of protecting the feeding facilities from excessive rise of regenerative braking voltage or guaranteeing the minimum traction power of train. In normal operating situation, the pantagraph voltage of the train should be maintained within these limits. Keeping these facts in minds, we suggest new methods or analyzing AT feeding systems using the constant power models with the conditions of voltage constraints. The simulation results from a sample system using the proposed method illustrate both the states of system variables and the supply-demand relation of power among the trains and the systems very clearly, so it is believed that the proposed method yields more accurate results than conventional methods do. The proposed methods are believed to contribute to the assessment of TCR-TSC for compensating reactive powers too.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2021-2026
• /
• 2008

Recently, a high speed rail consists of many train coaches and power cars. For keeping the reliable train communication system with train coaches and power cars, train uses the OSI model(Open Systems Interconnection Basic Reference Model) and KTX(Korea Train eXpress) only uses the Physical to Transport layer of OSI model. This paper describes the analysis of CLNP(Connectionless Network Protocol) and ES-IS(End System to Intermediate System) protocols used in KTX for the network layer. CLNP is used to send data to other system and ES-IS protocol is used to route and send information between end systems and intermediate systems. Also this paper presents the protocol parsing program and implementation of Network layer.

• International journal of advanced smart convergence
• /
• 제13권1호
• /
• pp.201-205
• /
• 2024

Currently, the most important issue on the earth is global warming, which causes climate change and leads to disasters. For this reason, each country is focusing on renewable energy, carbon neutrality, environmentally friendly energy and transportation. Bicycles used as short-distance vehicles do not emit gases harmful to the human body that pollute the Earth's atmosphere. Also, the use of bicycles has the effect of improving the health of people, and each country is designing a short distance transportation network using bicycles. In this study, we propose a model of a bicycle power-train that can use a belt as a power transmission medium. The basic principles and methods for applying the proposed new type of power-train to bicycles are presented.

• 한국철도학회논문집
• /
• 제14권2호
• /
• pp.167-173
• /
• 2011

본 연구는 전력소비완화를 위해 전동열차의 출발시간을 조정하는 문제를 다룬다. 전동열차의 운행은 역행, 타행 및 제동의 단계로 구성된다. 역행단계는 전동열차의 운행을 위해 많은 전력량이 필요로 하며, 타행단계는 그 전력을 바탕으로 전력 소비가 거의 없이 운행되는 단계이고, 마지막으로 제동단계는 정차를 위해 감속하는 단계로 전동열차의 관성력으로 인해 운동에너지가 전력으로 바뀌어 회생전력이 발생한다. 회생전력은 동일 전력계통의 운행구간에서 동 시간대에 역행운행 중인 전동열차의 동력자원으로 재사용 될 수 있어 소비전력량을 줄이는 것이 가능하다. 이를 위해 혼합정수계획모형을 제안하고 모형의 실효성을 검증하기 위해 수도권 도시철도 한 구간의 전력데이터를 사용하여 실험하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.623-625
• /
• 1997

This paper deals with the simulator for the diagnosis systems of high speed train. The purpose of this simulator is the verification of diagnosis systems. In this paper, the configuration of high speed train is investigated and the implementation model of power car is proposed. According to the model, mathematical equation is constructed. Dynamic simulation is executed and analyzed.