• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2003

Fireproofing polyolefin nanocomposite for the application of power distributing panel was prepared by compounding linear low density polyethylene(LLDPE), decabromodiphenyl oxide (DBDPO), $Sb_2O_3$ as flame retardant agents, and modified nano clay as filler. The optimized formulation ratio of compounds to prepare the fireproofing polyolefin nanocomposite was obtained. The flame retardant properties for nanocomposite prepared by compounding 22.5 phr of nano clay and 18 phr of DBDPO based on 100 phr of LLDPE were shown that the combustion time. 10${\sim}$18 s, combustion distance, 12${\sim}$15 mm and non-melt dropping characteristics. In particular. the content of DBDPO in nanocomposite could be decreased to 18 phr from 40 phr DBDPO for fireproofing composite containing 30 phr of clay. The electrical properties measured from tracking test, had an excellent antitracking properties by not showing the phenomenon of leakage current and sparking.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.4
• /
• pp.295-304
• /
• 2014

Communication infrastructure supports wide variety of mobile services such as photo and file sharing, location tracking, social network services and instant messaging. However, instances like power-loss and natural disasters disrupt these communication infrastructures unable to render support to these mobile services. Delay-tolerant networks (DTNs) offer a solution to these problems at hand. By utilizing mobility and opportunistic contacts among mobile devices, a plausible communication network can be establish and enable support to mobile applications. This paper presents an energy-efficient, reliable message delivery routing scheme with message prioritization rules for DTN. It uses the context information of nodes (mobile devices) such as the contact history (location and time of contact), speed/velocity, moving direction to determine the best forwarders among nodes in the network. The remaining energy of the nodes is also used to determine the message types a node can deliver successfully. The simulation results show that proposed approach outperforms Epidemic and Prophet routing schemes in terms of delivery ratio, overhead ratio, delivered messages per types and remaining energy.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1165-1175
• /
• 2015

This paper presents an advanced sensorless permanent magnet (PM) brushless motor controller integrated circuit (IC) employing an automatic lead-angle compensator. The proposed IC is composed of not only a sensorless sine-wave motor controller but also an isolated gate-driver and current self-sensing circuit. The fabricated IC operates in sensorless mode using a position estimator based on a sliding mode observer and an open-loop start-up. For high efficiency PM brushless motor driving, an automatic lead-angle control algorithm is employed, which improves the efficiency of a PM brushless motor system by tracking the minimum copper loss under various load and speed conditions. The fabricated IC is evaluated experimentally using a commercial 200 W PM brushless motor and power switches. The proposed IC is successfully operated without any additional sensors, and the proposed algorithm maintains the minimum current and maximum system efficiency under $0N{\cdot}m$ to $0.8N{\cdot}m$ load conditions. The proposed IC is a feasible sensorless speed controller for various applications with a wide range of load and speed conditions.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.344-345
• /
• 2018

In order to alleviate the negative impacts of harmonically distorted grid condition on grid-connect inverters, an optimal control design-based gain selection scheme of an LCL-filtered grid-connected inverter and its ability to compensate selective harmonics are presented in this paper. By incorporating resonant terms into the control structure in the state-space to provide infinity gain at selected frequencies, the proposed control offers an excellent steady-state response even under distorted grid voltage. The proposed control scheme is achieved by using a state feedback controller for stabilization purpose and by augmenting the resonant terms as well as intergral term into a control structure for reference tracking and harmonic compensation. Furthermore, the optimal linear quadratic control approach is adopted for choosing an optimal feedback gain to ensure an asymptotic stability of the whole system. A discrete-time full state observer is also introduced into the proposed control scheme for the purpose of reducing a total number of sensors used in the inverter system. The simulation results are given to prove the effectiveness and validity of the proposed control scheme.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.3
• /
• pp.43-52
• /
• 2008

Human errors are now considered as the most significant source of accidents or incidents in large-scale systems such as aircraft, vessels, railway, and nuclear power plants. As 61% of the train accidents in Korea railway involving collisions, derailments and fires were caused by human errors, there is a strong need for a systematic research that can help to prevent human errors. Although domestic railway operating companies use a variety of methods for analyzing human errors, there is much room for improvement. Especially, because most of them are based on written papers, there is a definite need for a well-developed computerized system supporting human error analyzing tasks. The purpose of this study is to propose a framework for a computerized human error analysis system focused on the railway industry on the basis of human error analysis mechanism. The proposed framework consists of human error analysis (HEA) module, similar accident tracking (SAT) module, cause factor recommendation (CFR) module, cause factor management (CFM) module, and statistics (ST) module.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.57-65
• /
• 2000

In this paper, a model reference adaptive control for the atomic force microscope (AFM) of tapping mode is investigated. The dynamics between the AFM system and al sample is mathematically modeled as a second order spring-mass-damper system with oscillatory inputs. The attractive and repulsive forces between the tip of the AFM system and the sample are derived using the Lennard-Jones potential energy. By non-dimensionalizing the displacement of the tip and the input frequency, the chaotic behavior near a resonance frequency is better depicted through the non-dimensionalized equations. Four nonlinear analysis techniques, a phase portrait, sensitive dependence on initial conditions, a power spectral density function, and a Pomcare map are investigated. Because the equations of motion derived in this paper involve unknown parameter values such as the damping effect of the air and the interaction constants between materials, the standard model reference adaptive control is adopted. Two control objectives, the prevention of chaos and the tracking of reference signal, are pursued. Simulation results are included.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.221-224
• /
• 2005

본 논문에서는 워터마크가 삽입된 데이터의 저작권 보호를 위하여 데이터의 복제 시 신속한 위치추적을 통한 불법 복제 방지 시스템을 제안하고 시뮬레이션 하였다. 제안된 방법은 복사기, 프린터, 스캐너 등에 부착된 워터마크 검출 장치로부터 워터마크 검출 시 원 워터마크 이미지와 추출된 워터마크이미지가 일정 비 이상의 상관관계가 있을 경우 불법 복제 상황으로 간주하고, 디지털 데이터로 변환된 워터마크 이미지와 주소 정보가 전력선을 통하여 전송된다. 수신단에서는 수신된 데이터의 발신자 정보를 통해 위치정보를 알아내어 불법 복제 작업현장의 위치를 추적한다. 전력선을 통신선로로 이용 시 전송신호는 전력선 채널 환경에서 임펄스 잡음에 많은 영향을 받기 때문에 본 논문에서는 제안한 시스템의 검증을 위해 AWGN과 임펄스 잡음을 고려하고 잡음 특성이 우수하고 신뢰성이 비교적 강한 DS-CDMA/BPSK 시스템을 통해 제안된 시스템을 시뮬레이션 하였다. 또한, 열악한 채널 환경으로부터 수신성능을 개선하기 위해 컨벌루션 부호화기법을 적용하여 성능 개선 전 후의 복원 이미지의 성능을 비교 분석 하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.228-229
• /
• 2007

현재까지 계통연계형 태양광 시스템의 최대전력추종(MPPT)방법에 대한 많은 연구가 진행되고 있다. 그 중 대표적인 최대 전력 추종 방법에는 일정전압 제어방식, P&O(Perturbation and Observation)제어방식, IncCond(Incremental Condutance) 제어 방식이 있다. 이 중 일정전압 제어방식은 일사량, 온도 등을 고려해 특정한 값의 태양전지 출력전압을 고정시키도록 하여, 최대전력점 근처에서 동작하도록 제어하는 방식이다. 이 방식은 태양전지 입력 전류 센서가 필요없고, 저일사량 조건에서 다른 기법에 비해 우수한 효율 특성을 나타내고 있다. 하지만, 온도 및 일사 조건에 따라 변하는 최대전력전압지점을 추종하지 못해 다양한 조건에서 최대전력추종효율이 떨어지는 단점이 있다. 이에 본 논문에서는 다양한 일사 조건 및 온도 조건에 대응하는 최대 출력전압을 실시간으로 산출하여, 이를 통해 최대전력추종제어를 하는 방법을 제안하고자 한다. 제안된 기법은 다양한 일사조건 및 온도변화에 대해 능동적으로 대응하여 우수한 추종효율 특성을 나타내고, 또한 입력 DC 전류 센서를 제거하고, 내부 연산이 간단함으로써 경제적인 면에서 유리하다. 본 논문에서 제안된 최대전력 추종기법의 타당성을 검증하기 위해서 PSIM 시뮬레이션을 통해 그 타당성을 검증 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.84-86
• /
• 2010

Time information and time synchronization are fundamental building blocks in wireless sensor networks since many sensor network applications need time information for object tracking, consistent state updates, duplicate detection and temporal order delivery. Various time synchronization protocols have been proposed for sensor networks because of the characteristics of sensor networks which have limited computing power and resources. However, none of these protocols have been designed with time representation scheme in mind. Global time format such as UTC TOD (Universal Time Coordinated, Time Of Day) is very useful in sensor network applications. In this paper we propose time keeping and synchronization method for global time presentation in wireless sensor networks.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.878-881
• /
• 2003

To acquire an appointed speaker's clear voice signal from inspect-camera, picture-conference or hands free microphone eliminating interference noises needs to be preceded speaker's position automatically. Presumption of sound source position's basic algorithm is about measuring TDOA(Time Difference Of Arrival) from reaching same signals between two microphones. This main project uses ADF(Adaptive Delay Filter) [4] and CPS(Cross Power Spectrum) [5] which are one of the most important analysis of TDOA. From these analysis this project proposes presumption of real time sound source position and improved model NI-ADF which makes possible to presume both directions of sound source position. NI-ADF noticed that if auditory sense of humankind reaches above to some specified level in specified frequency, it will accept sound through activated nerve. NI-ADF also proposes practicable algorithm, the presumption of real time sound source position including both directions, that when microphone loads to some specified system, it will use sounds level difference from external system related to sounds of diffraction phenomenon. In accordance with the project, when existing both direction adaptation filter's algorithm measures sound source, it increases more than twice number by measuring one way. Preserving this weak point, this project proposes improved algorithm to presume real time in both directions.