• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.755-766
• /
• 2008

Recently, NAND flash memory is becoming into the spotlight as a next-generation storage device because of its small size, fast speed, low power consumption, and etc. compared to the hard disk. However, due to the distinct characteristics such as erase-before-write architecture, asymmetric operation speed and unit, disk-based systems and applications may result in severe performance degradation when directly implementing them on NAND flash memory. Especially when a B-tree is implemented on NAND flash memory, intensive overwrite operations may be caused by record inserting, deleting, and reorganizing. These may result in severe performance degradation. Although ${\mu}$-tree has been proposed in order to overcome this problem, it suffers from frequent node split and rapid increment of its height. In this paper, we propose Log-Structured B-Tree(LSB-Tree) where the corresponding log node to a leaf node is allocated for update operation and then the modified data in the log node is stored at only one write operation. LSB-tree reduces additional write operations by deferring the change of parent nodes. Also, it reduces the write operation by switching a log node to a new leaf node when inserting the data sequentially by the key order. Finally, we show that LSB-tree yields a better performance on NAND flash memory by comparing it to ${\mu}$-tree through various experiments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.2
• /
• pp.145-151
• /
• 2008

The research so far has primarily analyzed efficiency improvement but in this research, it analyzes the characteristics of earthquake behavior, with changed pier heights, through ordinary and seismic analysis. For this, the kind of bridge bearing has been changed against PSC I-shaped bridge, which is mostly used in practice, and at all times earthquake analysis has been performed with through height of pier. Especially considering sectional power resulting from earthquake analysis, displacement of PSC I-shaped bridge bearing, diameter of pier pillar by earthquake load, and upper spare gap have been analyzed. In case of high-pear, seismic isolated device is decided as proper for cars' driving and for management of bridge since it decreases movement of upper structure, than elastic bearing, reducing size of elastic connect device, and it's been analyzed it is effective for improvement of fine view and economic efficiency reducing section of lower bridge structure. Finally, when design PSC I-shaped bridge bearing, for the proper structure and high-pier side, applying seismic isolated device through precise inner analysis is proper than applying equal elastic bearing.

• Management & Information Systems Review
• /
• v.15
• /
• pp.109-145
• /
• 2004

Upcoming 21st century, Management circumstance for a small and medium enterprise have been rapidly changed by Knowledge management, Informationization, Hi-technology. Changing from an era of small concept to strong concept, It will be a severe innovation period and can not survive with life as the same as the past, It is the era of best which mean only the best can survive, None of the average faculty can survive. Due to rapid proceeding of innovation of Informationization, It stimulate acceleration of technology innovation, infinity competition regardless the nation boarder, result in proceeding to Informationization. A small and medium enterprise is defined as smaller size of business than big business as point of capital, employee, output. It is concept, which usually used against concept of big business. When define a small and medium enterprise, criteria to determine a small and medium enterprise is depends on country and a category of business. However, In every country, A small and medium enterprise is getting be bigger and importance factor in whole industry. A small and medium enterprise is well developed and also well balanced with a large enterprise in the developed country. All around in the world, Interest about a small and medium enterprise is becoming higher. It is actively researching into a small and medium enterprise as the mean to create new employment, new industry, as means to from integration of a all and medium enterprise,as source of high competitive power. The status quo of rapid changing into informationization have been realized at considerable level in Korea. Information society is defined as information technology is main key to determine individuals competitiveness, which can solve effectively the side effect result from industrialization. It cleary imply that information technology is the most promising and important industry in 21st century. Therefore, We should seek to foster independent a small and medium enterprise and develop them corresponding to new concept of a small and medium enterprise in 21st century. The main frame of policy should be new economic system, which can contribute establishment of a small and medium enterprise, management innovation. It also attribute a small and medium enterprise to reveal their creative. New economic paradigm in 21st will be expanded with organization, market, technology. So far, a small and medium enterprise has been acknowledge as economic weaker and the one should be protected. However, In 21st century a small and medium enterprise will be considered as active majority or a source of creative. Development of technology to produce a small quantity with variety product and acceleration of knowledge and informationization will result in comparative merits of a small and medium enterprise. Hereby, The role and relative importance of a small and medium enterprise in our economic will getting be larger and It will be developed as the main force to activate the economic. However, Only a small and medium enterprise, which overcome difficulty with active desire and effort to improve their lot can be developed as a competitive enterprise in 21st century in considering themselves to be developed as diversity, active, independent, business by an enterprise.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.6 no.1
• /
• pp.23-37
• /
• 2011

This paper is brought to carry out an empirical study whether evolution process of venture firm's scale is following the Gibrat's law; random evolution process, or Pareto law; self-organizing process. The empirical test, as attaching theoretical explanation, of this research utilize the serial data samples of 92 KOSDAQ listed companies from the year of 2005 through 2008. Summarizing the research results are as followed. First, Gini Coefficients representing the density of venture firm's scale has been constantly reduced since the year of 2005 in terms of number of employee, while these index increased during the same time period from the perspective of sales volume. Second, the evolution process of Korea venture firm's scale is following the Power Law related to Pareto Law. In particular, estimated Pareto coefficient, ${\alpha}$, is shown lower than 1 which is significant result. Third, the probability of joining in the top tier group of firm starting from the early stage growing is forecasted into 6.9%, the result which emphasize the starting scale of venture firm play an important role in long term evolution of venture firm.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.129-134
• /
• 2002

The radiosurgery is planned that prescribed dose was irradiated to tumor for obtaining expected remedial value in stereotactic radiosurgery. The planning for many irregular tumor shape requires long computation time and skilled planners. Due to the rapid development in computer power recently, many optimization methods using computer has been proposed, although the practical method is still trial and error type of plan. In this study, many beam variables were considered and many tumor shapes were assumed cylinderical ideal models. Then, beam variables that covered the target within 50％ isodose curve were searched, the result was compared and analysed. The beam variables considered were isocenter separation distance, number of isocenters and collimator size. Dose distributions obtained with these variables were analysed by dose volume histogram(DVH) and dose profile at orthogonal plane. According to the results compared, the use of more isocenters than specified isocenter dosen't improve DVH and dose profile but only increases complexity of plan. The best result of DVH and dose profile are obtainedwhen isocenter separation was 1.0-1.2 in using same number of isocenter.

• Journal of the Korean Magnetics Society
• /
• v.21 no.2
• /
• pp.77-82
• /
• 2011

The use of soft magnetic materials have been increasing in the various industrial fields according to the increasing demand for high performance, automatic, miniaturing equipments in the recent our life. In this study, we investigated the effect of factors on the core loss and magnetic properties of electrical steel and soft magnetic composites. Furthermore, we reviewed the major efforts to reduce the core loss and improve the soft magnetic properties in the two main soft magnetic materials. Domain purification which results from reduced density of defects in cleaner electrical steels is combined with large grains to reduce hysteresis loss. The reduced thickness and the high electrical conductivity reduce the eddy current component of loss. Furthermore, the coating applied to the surface of electrical steel and texture control lead to improve high permeability and low core loss. There is an increasing interest in soft magnetic composite materials because of the demand for miniaturization of cores for power electronic applications. The SMC materials have a broad range of potential applications due to the possibility of true 3-D electromagnetic design and higher frequency operation. Grain size, sintering temperature, and the degree of porosity need to be carefully controlled in order to optimize structure-sensitive properties such as maximum permeability and low coercive force. The insulating coating on the powder particles in SMCs eliminates particle-to-particle eddy current paths hence minimizing eddy current losses, but it reduces the permeability and to a small extent the saturation magnetization. The combination of new chemical composition with optimum powder manufacturing processes will be able to result in improving the magnetic properties in soft magnetic composite materials, too.

• Elastomers and Composites
• /
• v.39 no.2
• /
• pp.131-141
• /
• 2004

The recycling of waste XLPE(crosslinked polyethylene), which is a major source of scraps from high voltage power transmission cables, has been discussed. The waste XLPE scraps were ground into fine powder with various sizes from less than $100{\mu}m$ up to about $1000{\mu}m$ using two types of tailor-made pulverizers. The compounds were prepared in a modular intermeshing co-rotating twin screw extruder at various conditions such as different compositions, types and powder sizes of waste XLPE, screw configurations and various polymer matrices (LDPE, HDPE, PP, PS). The mechanical and rheological properties and the fracture surface or the compounds were investigated. It was found that an improved impact strength was obtained from the compound with white XLPE powder pulverized from the scraps without outer/inner semi-conductive layers. Generally, the impact strength increases with the content of XLPE but decreases with the size of XLPE. Especially for LDPE, the extrusion was possible up to 80 wt% loading of XLPE. Also, the impact strength increases with the number of kneading disc blocks in the given screw configurations. The melt viscosity of the compounds increases with increasing XLPE loading. However, the higher shear thinning behavior of the compounds at common shear rates implies proper processibility of the compounds. In addition, the impact strength for other polymer matrices used increases with XLPE and it is noticeable that the impact strength of PS/XLPE (80/20 wt%) compound was improved twice that of pure PS.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.65-75
• /
• 2017

This study proposes development of 3U CubeSat standard platform whose function and performance are verified via KAUSAT-5 development. 3U CubeSat platform specification was selected for the design of 3U Cubesat standard platform by examining existing CubeSat and state-of-art technology, and consequently a universally usable 3U CubeSat platform was designed. Standard platform was manufactured in 1.5U size and developed with a modular concept to be able to add and expand payloads and ADCS actuators for meeting the user's needs. In addition, in case of the power system, the solar panel, the battery, and the deployment mechanism are designed to be configured by the user. In the mechanical system design of a standard platform, subsystem and micro equipment functions/performance could be integrated and miniaturized on micro-sized PCBs and maximized electrical capability to accommodate multiple payloads. In the development of the 3U CubeSat, the satellite platform adopts the developed standard platform, which can reduce the cost and schedule for the whole satellite development by reducing the additional function verification.

• Journal of National Security and Military Science
• /
• s.4
• /
• pp.83-118
• /
• 2006

This study is to develop digital leadership in a field of national defense. Today, korean society is facing the crisis of national security. But national defense leadership is not show in the circumstance of national security crisis. As you know, national defense leadership is a process that make use of influence. Which means it converges people's interest and demands well and also show people the right vision of national defense and make them to comply the policy about national security. Because of the environmental change, our national defense leadership is having a new turning point. First, international order, which is under post-cold war, raises possibility of guarantee of peace and security in international society but also, cause the increase of multiple uncertainty and small size troubles in security circumstance. In addition, Korean society is rushing into democratization and localization period by success in peaceful change of political power went through about three times. The issue of political neutralization of military is stepping into settlement but still, negative inheritance of old military regime is worrying about it. In this situation, we can't expect rise in estimation about the importance of security and military's reason for being. So, military have to give their concern to not only internal maintenance of order and control and growth of soldiers but also developing external leadership to strength influence to society and military's the reason for being. So for these alternative I'm suggesting a digital leadership of national defense which fits digital era. This digital leadership is the leadership which can accept and understand digital technology and lead the digital organization. To construct digital national defense we need a practical leadership. The leadership has to be digital leadership with digital competence that can direct vision of digital national defense and carry out the policy. A leader who ha s digital leadership can lead the digital society. The ultimate key to construct digital government, digital corporate and digital citizen depends on digital leader with digital mind. To be more specific, digital leadership has network leadership, next generation leadership, knowledge driven management leadership, innovation oriented leadership. A leader with this kind of leadership is the real person with digital leadership. From now on, to rise this, we have to build up human resource development strategy and develop educational training program.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.292-303
• /
• 2011

A new type of sand bypassing system is proposed for recovering the eroded beach in this study. This system provides an added methodology to the soft defence which is main recovery method for the coastal shore protection in the world. The study proposes a conceptional design and manufacturing procedure for the relatively small size machine of sand bypassing. In order to get the discharging volume information, the power capacity of the system is tested in the field. The discharge rate of the new system shows up to the expected maximum of 618 ton/hr which is 9.6% lower than that by theoretical calculation. It gives a resonable agreement in this system when the flow is assumed to be of the high density. In this study, the delivering volume of sand is estimated according to the discharge rate. The combination of 300 mm(12 inch) intake and 250 mm(10 inch) discharge pipe line has the pumping capacity of $103\;m^3/hr$ which is nearly the same as that of South Lake Worth Inlet sand bypassing system, Florida, U.S.A.. The proposed system added the mobility to its merit. The unit price of Florida's sand bypassing is $$8~9/m^3$ (US). The system would be economically suitable for small volume of sand because no additional equipment is necessary for the intake. The diesel fuel of 25~30 l/hr was consumed during the system operation. The multiple working system would be the next investigation target for large volume of sand.