• 한국수자원학회논문집
• /
• 제50권6호
• /
• pp.359-371
• /
• 2017

본 연구에서는 안동댐유역을 대상으로 분포형 모형과 미계측유역 자료생성방법인 공간확장자료 생성방법을 사용하여 47개 미계측유역에 대해 홍수유출 시계열자료를 생성하고 3개 관측유역을 포함한 총 50개 유역에 대해 첨두유량을 추출하여 분석함으로써 강우의 공간분포가 유출에 미치는 영향을 실제유역과 실제사상에 대해 자세히 분석하였다. 20개 사상에 대해 GRM 모형의 매개변수 보정 및 검증결과 적절한 모형효율 통계결과를 얻었다. 이 추정된 매개변수와 실제강우(강우의 공간분포를 고려한 강우) 및 공간평균강우(실제강우를 공간적으로 평균한 강우)를 사용하여 50개 유역의 홍수유출 시계열자료를 생성하였으며 이 시계열 자료 중 첨두유량을 추출하여 분석한 결과 공간평균강우에 의한 첨두유량의 분포는 실제강우에 의한 첨두유량의 분포와 차이가 있었다. 강우의 분포가 유역전반에 비슷한 경우에는 실제강우와 공간평균강우에 의한 첨두유량의 분포가 비슷하거나 약간의 차이가 있었다. 하지만 호우가 상류 또는 하류방향으로 이동하거나 강우가 무작위로 분포되는 경우에는 공간평균강우에 의한 첨두유량의 분포가 실제강우에 의한 첨두유량의 분포보다 크게 좁아지는 것을 보였다. 이러한 사상의 비율을 조사한 결과 강우의 공간적 변동성을 고려하지 않고 홍수유출을 모의한다면 약 35%의 사상에 대해서는 적절하지 않은 첨두유량 모의결과를 얻을 수 있는 것으로 조사되었다. 따라서 홍수량 산정 또는 수자원 설계 시 강우의 시간분포 뿐만 아니라 공간분포 또한 고려해야 한다. 계측유역과 미계측유역의 첨두유량의 관계를 조사한 결과 낙동강 지류들에 위치한 미계측유역들의 첨두유량들은 그 크기가 넓게 분포됨에 따라 계측유역의 첨두유량을 사용하여 생성한 power law 관계를 이 미계측유역들의 첨두유량 추정 시 사용할 수 없었다. 또한 계측유역들의 첨두유량 또는 미계측유역 중 상하류로 연결된 비독립적인 소유역들의 첨두유량간에는 power law 가 존재하였으나 낙동강 지류들에 위치한 독립된 소유역들의 첨두유량들 간에는 상관관계가 없었다.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.589-595
• /
• 2014

The error of instrument transformers is measured by connecting the external burden with the secondary terminal of the instrument transformers. Because the error of transformer is affected by the apparent power and power factor of the external burden, an accurate measurement of burden is important for transformer evaluation. We have developed the burden evaluation equipment for both potential transformer and current transformer by employing the series resistor in the range of $20m{\Omega}{\sim}5{\Omega}$ and the parallel resistor in the range of $1M{\Omega}{\sim}500{\Omega}$, respectively, together with visual basic program. We could reduce testing time more than 5 times by employing method developed in this study, compared with that developed in past. This method shows more better reliability by analyzing the evaluation results and fitting graphs of burden measurements. The test results of the developed system is compared with those obtained in the power meter analyzer to verify the validity.

• 조명전기설비학회논문지
• /
• 제21권10호
• /
• pp.126-133
• /
• 2007

본 연구에서는 데이터 마이닝 기법을 이용하여 전력계통의 단기 부하 예측을 하는 방안을 제시한다. 기존의 단기 부하 예측은 시계열 분석 방법이 주를 이루었으며, 이러한 방법은 방대한 양의 자료를 기반으로 데이터베이스를 만들고 이를 이용하여 여러 가지 계수를 이용하여 수요를 예측함으로써 많은 시간과 노력이 소요되고 있다. 따라서 본 연구에서는 좀 더 적은 시간과 노력으로 부하예측이 가능하도록 데이터마이닝 기법을 이용하여 요일별 그리고 특수 일의 패턴을 분석하고 의사결정트리를 이용한 예측방법을 제시하고자 한다. 그리고 현재 전력거래소를 통해 거래되고 있는 계통한계가격과의 관계를 분석하여 예측 계수에 계통한계가격을 추가하여 예측방법을 제시하고자 한다.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.249-256
• /
• 2014

A novel topology generation method for the no dead-time three-phase AC/DC converter is proposed in this study. With this method, a series of no dead time topologies are generated and their operation principles are analyzed. The classic three-phase bridge AC/DC converter can realize a bidirectional operation. However, dead-time should be inserted in the driving signals to avoid the shoot-through problem, which would cause additional harmonics. Compared with the bridge topology, the proposed topologies lack the shoot-through problem. Thus, dead time can be avoided. All of the no dead time three-phase AC/DC converters can realize bidirectional operation. The operating principles of the converters are analyzed in detail, and the corresponding control strategies are discussed. Comparisons of waveform distortion and efficiency among the converters are provided. Finally, 9 KW DSP-based principle prototypes are established and tested. Simulation and experimental results verify the theoretical analysis.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.567-577
• /
• 2012

This paper introduces a new scheme to balance the DC bus voltages of a cascaded H-bridge converter which is used as a Distribution Static Synchronous Series Compensator (D-SSSC) in electrical distribution network. The aim of D-SSSC is to control the power flow between two feeders from different substations. As a result of different cell losses and capacitors tolerance the cells DC bus voltage can deviate from their reference values. In the proposed scheme, by individually modifying the reference PWM signal for each cell, an effective balancing procedure is derived. The new balancing procedure needs only the line current sign and is independent of the main control strategy, which controls the total DC bus voltages of cascaded H-bridge. The effect of modulation index variation on the capacitor voltage is analytically derived for the proposed strategy. The proposed method takes advantages of phase shift carrier based modulation and can be applied for a cascaded H-bridge with any number of cells. Also the system is immune to loss of one cell and the presented procedure can keep balancing between the remaining cells. Simulation studies and experimental results validate the effectiveness of the proposed method in the balancing of DC bus voltages.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권7호
• /
• pp.405-413
• /
• 2004

Traditionally, electrical power systems had the vertically-integrated industry structures based on the economics of scale. However power systems have been recently reformed to increase the energy efficiency of the power system. According to these trends, Korean power industry has been partially restructured, and the competitive generation market was opened in 2001. In competitive electric markets, correct demand data are one of the most important issue to maintain the flexible electric markets as well as the reliable power systems. However, the measuring load data can have the uncertainty because of mechanical trouble, communication jamming, and other things. To obtain the reliable load data, an efficient evaluation technique to adust the missing load data is needed. This paper analyzes the load pattern of historical real data and then the turned ARIMA (Autoregressive Integrated Moving Average) model, PCHIP(Piecewise Cubic Interporation) and Branch & Bound method are applied to seek the missing parameters. The proposed method is tested under a variety of conditions and tested with historical measured data from the Korea Energy Management Corporation (KEMCO).

• 전기학회논문지P
• /
• 제67권2호
• /
• pp.70-74
• /
• 2018

Social infrastructure such as production, transportation, gas, and electrical facilities would be degraded according to time and those facilities might need more maintenances, repairing, and management as time goes by. Especially, in the case of a power transformer, it is important to diagnose the transformer in order to avoid malfunction and failure because they could cause enormous damage. The economic as well as technical aspects of a transformer management must be considered while it is operated. Therefore, the concept of asset management should be applied as an advanced method of transformer management. Asset management refers to a series of processes to make a plan of maintenance and conservation of a power transformer considering the soundness, investment cost, and importance of equipment. It is important to apply the asset management considering calculation of a lifetime loss. In this paper, the lifetime loss calculation method of asset management for a power transformer is suggested.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.233-236
• /
• 2002

The solution for PFC(Power Factor Correction), as a regulation in energy Policy, is becoming a hot Issue in every country because of the shortage of electrical energy. Therefore, a new improved idea for PFC problem has been introduced in this study. A lot of merits, effective cost by simple circuit, reduced PCB size, lighter than reactor in the view of weight, lower level of screen noise by leakage inductance in CTV applications, have been stated by comparing to the earlier method of using a Reactor. All test results in this statement were done by using a power device of STR-G9600 series based on the real load condition of color television. furthermore, the study shows that the test results also meets the IEC-1000-3-2 class D, which regulates the PFC when input power of a set is more than 75watts. More improved PFC in other applications hopes to be implemented by using the proposed method.

• 전력전자학회논문지
• /
• 제20권5호
• /
• pp.395-401
• /
• 2015

This paper proposes a new bidirectional DC-DC converter with high efficiency. The proposed converter is composed of a flyback and a tapped-inductor boost converter to satisfy extreme operating conditions with low cost. The outputs are connected in series to achieve a high-voltage step-up. In the reverse direction, the proposed converter has an extreme step-down voltage. In this study, the proposed converter was employed with a 100 W hardware prototype. To design the controller, a small-signal transfer function of the proposed converter is derived. For PV power conditioning systems, a maximum power point tracking method is applied with perturb and observe method. To verify the operation of the bidirectional power flow, the current controller is applied. All of the controllers are employed with a digital signal processor.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1467-1476
• /
• 2019

Grid unbalanced faults can cause core saturation of power transformer and produce lower-order harmonics. These issues increase the electrical stress of power electronic devices and can cause a tripping of an entire HVDC system. In this paper, based on the positive-sequence and negative-sequence impedance model of a VSC-HVDC system as seen from the point of common connection (PCC), the resonance problem is analyzed and the factors determining the resonant frequency are obtained. Furthermore, to suppress over-voltage and over-current during resonance, a novel method using a virtual harmonic resistor is proposed. The virtual harmonic resistor emulates the role of a resistor connected in series with the commutating inductor without influencing the active and reactive power control. Simulation results in PSCAD/EMTDC show that the proposed control strategy can suppress resonant over-voltage and over-current. In addition, it can be seen that the proposed strategy improves the safety of the VSC-HVDC system under unbalanced faults.