• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.48-56
• /
• 2007

OFDMA (Orthogonal Frequency Division Multiple Access) is widely used as multiple access techniques for next generation mobile communication systems. However, OFDMA has a disadvantage of high peak-to-average power ratio and SC-FDMA (Single-Carrier Frequency Division Multiple Access) was proposed for uplink systems to overcome the drawback. SC-FDMA also has several demerits including degraded performance with high-order modulations or with multiple antenna techniques, and less flexibility in resource allocation and pilot patterns. In order to achieve the best performance over a wide range of environments, each mobile station should select either of OFDMA and SC-FDMA according to the given condition and a pilot structure for SC-FDMA systems should be similar to that of OFDMA to maintain the same frame structure. While conventional SC-FDMA schemes require an entire SC-FDMA symbol or a separate short symbol for pilots, this paper proposes a method which supports the pilots included in SC-FDMA data parts and enables a SC-FDMA frame to hold the same structure as an OFDMA frame.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.1-7
• /
• 2008

The efficient node energy utilization in wireless sensor networks has been studied because sensor nodes operate with limited power based on battery. Since a large number of sensor nodes are densely deployed and collect data by cooperation in wireless sensor network, keeping more sensor nodes alive as possible is important to extend the lifetime of the sensor network. Energy efficiency is an important factor of researches that efficient routing algorithm is needed in wireless sensor network. In this research, I consider some methods to utilize more efficiently the limited power resource of wireless sensor networks. The proposed algorithm is the sink first divides the network into several areas with hop counts and data transmission based on cluster ID. The performance of the proposed algorithm has been examined and evaluated with NS-2 simulator in terms of lifetime, amount of data and overhead.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.158-163
• /
• 2013

While job stress evaluations are reported in the recent surveys upon the nuclear power plants(NPPs), any significant advance in the types of questionnaires is not currently found. There are limitations to their usefulness as analytic tools for the management of safety resources in NPPs. Data mining(DM) has emerged as one of the key features for data computing and analysis to conduct a survey analysis. There are still limitations to its capability such as dimensionality associated with many survey questions and quality of information. Even though some survey methods may have significant advantages, often these methods do not provide enough evidence of causal relationships and the statistical inferences among a large number of input factors and responses. In order to address these limitations on the data computing and analysis capabilities, we propose an advanced procedure of survey analysis incorporating the DM method into a statistical analysis. The DM method can reduce dimensionality of risk factors, but DM method may not discuss the robustness of solutions, either by considering data preprocesses for outliers and missing values, or by considering uncontrollable noise factors. We propose three steps to address these limitations. The first step shows data mining with response surface method(RSM), to deal with specific situations by creating a new method called response surface data mining(RSDM). The second step follows the RSDM with detailed statistical relationships between the risk factors and the response of interest, and shows the demonstration the proposed RSDM can effectively find significant physical, psycho-social, and environmental risk factors by reducing the dimensionality with the process providing detailed statistical inferences. The final step suggest a robust stress management system which effectively manage job stress of the workers in NPPs as a part of a safety resource management using the surrogate variable concept.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.517-520
• /
• 2005

Wireless sensor network combines sensing and computing technology which can sense light, temperature, vibration, magnetic field and wind etc, as each purpose of using those. Wireless nodes operate signal processing skill which has proceeded sensed information from the sensor, transmission which makes information reached to observer and limited energy managing skill which is needed on account of using battery to operate wireless. To make responsible measuring and sensing out of them, efficient energy management is so important to maintain life time of network. In this paper, after explaining CSMA/CA(Carrier Sense Multiple Access/Collision Avoidance) traditional wireless MAC protocol, and ER-MAC(Energy Rate Medium Access Control) which are not managing resource of hardware but MAN(Medium Access Control), data-link layer out of OSI 7 layer. We would like to analyze those efficiency of power saving comparing with each protocol.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.127-129
• /
• 2007

Since the competitive market environment was introduced into the electric power industry, the structure of the industry has been changing from vertically integrated system to functionally unbundled and decentralized system composed of multiple (decision-making) market participants. So the market participants such as Gencos or LSE (load serving entity) need to forecast the market clearing price and thus build their offer or bidding strategies. Not just these market players but also a market operator is required to perform market analysis and ensure simulation capability to manage and monitor the competitive electricity market. For fulfilling the demand for market simulation, many global venders like GE, Henwood, Drayton Analytics, CRA, etc. have developed and provided electricity market simulators. Most of these simulators are based on the optimization formulation which has been used mainly for the least cost resource planning in the centralized power system planning and operation. From this standpoint, it seems somehow inevitable to face many challenges on modeling competitive market based on the method of traditional market simulators. In this paper, we propose a kind of new method, which is MAS based market simulation. The agent based model has already been introduced in EMCAS, one of commercial market simulators, but there may be various ways of modeling agent. This paper, in particular, seeks to introduce an model for MAS based market simulator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.360-364
• /
• 2016

The rare earth output is concentrated in limited number of countries including China. Also the necessity for development of non-rare earth motor is getting signified due to the rapid increase of rare earth price and resource weaponizing policies. Non-rare earth motor is generally designed as spoke type PMSM (Permanent Magnet Synchronous Motor) in order to maximize the power density. Such spoke type PMSM has advantage in concentrating the flux but demonstrates lower efficiency compared to permanent magnet using Nd (Neodymium) permanent magnet. Therefore, applications with strong necessity for efficiency need rotor structure having improved efficiency compared to spoke type PMSM. Hence, this study suggested fan-shape type PMSM with somewhat lower power density but maximized efficiency. Fan-shape type PMSM is a rotor shape demonstrating outstanding reduction of iron loss compared to existing spoke type. Thus, this study analyzed the improvement of efficiency and reduction of loss arising from the suggested shape through parameter calculation.

• Journal of Internet Computing and Services
• /
• v.4 no.4
• /
• pp.15-25
• /
• 2003

Wireless ad-hoc networks are only composed with mobile devices. Unlike the traditional wired networks, those devices are mostly operated with battery power. Since the battery-operated power is limited, the efficient energy resource managements becomes an important issue in wireless ad-hoc networks and various studies that considered these characteristics are progressed. One of those studies is an energy efficient routing using coordinators. In this method. only devices elected as coordinator participate in data transmissions in ad-hoc networks, while other devices remain in sleep node. The overall energy consumption of a system can be reduced. In order to minimize energy consumption of a total network, previous results try to maximize the number of nodes in sleep mode. However, minimizing the number of coordinators does not ensure to increase the system lifetime. In this thesis, we propose an algorithm that can elect coordinators with considering the amount of necessary energy to transmit assigned data and a connectivity of nodes in the networks. The result of proposed coordinator election algorithm can increase the system lifetime of an Ad-hoc network from the results of existing coordinator election algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2323-2329
• /
• 2008

Advances in wireless communication and hardware technology have made it possible to manufacture high-performance tiny sensor nodes. More recently, the availability of inexpensive cameras modules that are able to capture multimedia data from the environment has fostered the development of Wireless Multimedia Sensor Networks(WMSNs). WMSN supplements the a advanced technique that senses, transmits, and processes the multimedia contents upon the text based traditional wireless sensor network. Since the amount of data which the multimedia contents have, is significantly larger than that of text based data, multimedia contents require lots of computing power and high network bandwidth. To process the multimedia contents on the wireless sensor node which has very limited computing power and energy, a technique for WMSN should take account of computing resource and efficient transmission. In the paper, we propose a new image compression technique YWCE for efficient compression and transmission of image data in WMSN. YWCE introduces 4 type of technique for motion estimation and compensation based on the Resolution Scalability of Wavelet. Experimental result shows that YWCE has high compression performance with different set of 4 type.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.5
• /
• pp.382-392
• /
• 2021

In recent years, floating offshore wind turbines have attracted more attention as a new renewable energy resource while bottom-fixed offshore wind turbines reach their limit of water depth. Various projects have been proposed with the rapid increase in installed floating wind power capacity, but the economic aspect remains as a biggest issue. To figure out sensible approaches for saving costs, a comparison analysis of the levelized cost of electricity (LCOE) between floating and bottom-fixed offshore wind turbines was carried out. The LCOE was reviewed from a social perspective and a cost breakdown and a literature review analysis were used to itemize the costs into its various components in each level of power plant and system integration. The results show that the highest proportion in capital expenditure of a floating offshore wind turbine results in the substructure part, which is the main difference from a bottom-fixed wind turbine. A floating offshore wind turbine was found to have several advantages over a bottom-fixed wind turbine. Although a similarity in operation and maintenance cost structure is revealed, a floating wind turbine still has the benefit of being able to be maintained at a seaport. After emphasizing the cost-reduction advantages of a floating wind turbine, its LCOE outlook is provided to give a brief overview in the following years. Finally, some estimated cost drivers, such as economics of scale, wind turbine rating, a floater with mooring system, and grid connection cost, are outlined as proposals for floating wind LCOE reduction.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.507-514
• /
• 2018

Technology-intensive industries can be used as a major growth engine for resource poor country in the territories. For example, in the case of Korea, nuclear power and radiation technology industry was highly developed, and it was possible to obtain national interests such as solving energy problems within the country and exporting nuclear power plants. On the other hand, there are cases where national damage is caused by erroneous governmental policy-making on technology-intensive sectors. In this study, we analyzed cases of misguided governmental policy-making for technology-intensive industry and three factors were identified. And we tried to develop a rational policy-making model using three types of allison's model in combination. The results of this study are expected to be useful for rational governmental policy-making processes for technology-intensive industries.