• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.185-192
• /
• 2014

The production type of foundry industry is a small quantity batch production methods that require the highly skilled technology in the global competition in the variety of customer needs and directly under the influence of fluctuations characteristic. Therefore suitability for small quantity batch production and flexible production capacity and price competitiveness is needed more than anything. To do this, we need transcription and comprehensive innovation activities to maximize the revenue structure of the organization and field survival foundation should be developed the TPI(Total Profit Innovation) process in all aspects of the organization and all employees are involved in order to create a cost, quality, time, and service part of the overall aim how to achieve those effects within a short period of time. We applied the TPI process for S company in the foundry business innovation and productivity through cost reduction. We will expect the productivity improvement and financial performance improvement and then continually accumulate and review the results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1131-1136
• /
• 2014

현재 LNG 운반선, 쇄빙선 등의 특수선박과 해양플랜트에 설치되는 전력변환 장치에는 다이오드를 이용하는 정류기가 많이 사용된다. 하지만 정류에 의한 비선형 부하의 입력전류에 많은 고조파가 포함되어 공급 전압파형의 왜곡을 초래한다. 전압파형의 왜곡은 발전기, 변압기, 부하기기 등의 오동작과 전력품질을 저하시키게 된다. 본 논문에서는 정류기 사용시의 전류왜곡을 감소시키기 위해서 직류 파형 정형화 회로를 사용하여 개선함으로써 부하에 인가되는 교류 파형을 정확한 정현파로 만든다. 그 결과 전력계통의 전류와 전압 파형에 포함되는 고조파를 저감할 수 있으며 이를 시뮬레이션을 통해 입증한다.

• 한국태양에너지학회 논문집
• /
• 제36권1호
• /
• pp.27-37
• /
• 2016

A simple but practical Ensemble Prediction System(EPS) for wind power forecasting was developed and evaluated using the measurement of the offshore meteorological tower, HeMOSU-1(Herald of Meteorological and Oceanographic Special Unite-1) installed at the Southwest Offshore in South Korea. The EPS developed by the Korea Institute of Energy Research is based on a simple ensemble mean of two Numerical Weather Prediction(NWP) models, WRF-NMM and WRF-ARW. In addition, the Kalman Filter is applied for real-time quality improvement of wind ensembles. All forecasts with EPS were analyzed in comparison with the HeMOSU-1 measurements at 97 m above sea level during Typhoon Bolaven episode in August 2012. The results indicate that EPS was in the best agreement with the in-situ measurement regarding (peak) wind speed and cut-out speed incidence. The RMSE of wind speed was 1.44 m/s while the incidence time lag of cut-out wind speed was 0 hour, which means that the EPS properly predicted a development and its movement. The duration of cut-out wind speed period by the EPS was also acceptable. This study is anticipated to provide a useful quantitative guide and information for a large-scale offshore wind farm operation in the decision making of wind turbine control especially during a typhoon episode.

• 한국철도학회논문집
• /
• 제18권6호
• /
• pp.533-542
• /
• 2015

본 논문은 도시철도 전동차 정차 시에 발생하는 회생전력으로 인해 전차선 가선전압 상승 시에 Converter(Forward)에서 Inverter(Reverse)로 mode 변환하여 상승된 가선전압을 AC 모선으로 환류하여 전차선 전압을 일정하게 유지하고 전동차 정차 시에 발생하는 회생전력을 재사용할 수 있는 부산도시철도의 더블 컨버터 직류 변전설비를 제안하며 전차선 직류전압 품질향상을 위해 부산도시철도 더블 컨버터 직류 변전설비에서 발생하는 Converter/Inverter mode 변환 시의 undershoot와 overshoot를 최소화할 수 있는 최적의 사이리스터 점호각을 시뮬레이션을 통하여 제시하였다.

• 한국항공우주학회지
• /
• 제42권8호
• /
• pp.707-712
• /
• 2014

항공기의 연료량 지시계는 비행동안 잔여 연료량을 시현해주는 장치로 비행 중에는 정상적으로 성능을 발휘해야 한다. 한국형 기동헬기 연료량 지시계는 비행 중에 결함코드 "8888"을 시현하여 잔여 연료량을 확인하지 못해 비행안전에 영향을 끼쳤으며 고장탐구과정에서 개발과정 시 미흡하게 설계된 EMI/EMC 성능을 확인하였다. 본 논문에서는 비행 중 결함코드를 시현하는 원인인 전자기 외란에 의한 전원 불안정 및 CAN 통신 오류를 확인하고 이와 연관된 연료시스템의 개선 및 설계 적합성을 입증하였다.

• 통상정보연구
• /
• 제9권2호
• /
• pp.103-120
• /
• 2007

The knowledge based economy requires more and more people to learn new knowledge and skills in a timely and effective manner. These needs and new technology such as computer and Internet are fueling a transition in e-learning. According to specialist's opinion, imagination experience studying is generalized, and learning environment that language barrier by studying, multi-language studying Machine that experience past things that disappear through simulation, and travel area, and experience future changed state disappears is forecasting to come. This is previewing finally that it may become future education that education and IT, element of entertainment is combined. Already, became story that argument for party satellite of e-Learning existence passes one season already. e-Learning is utilized already in all educations that we touch by effectiveness by corporation's competitive power improvement and implement of lifelong education in educational institutions through present e-Learning. It is obvious that when see from our viewpoint which is defining e-Learning by one industry and rear by application to education as well as one new growth power about these, e-Learning industry becomes very important means that can solve dilemma of growth real form. Only, special quality of digital industry that e-Learning is being same with other digital industry and repeat putting out a fire rapidly, and is repeating sudden change that these evolution is not gradual growth of accumulation and improvement of technology that is appearing consider need to. In the meantime, we need to observe about evolution of Information Technology. Because there is some scholars who e-Learning's concept foresees to evolve by u-Learning.(although, a person who see that these concept is not more in marketing terminology by some scholars' opinion is). This u-Learning's concept means e-Learning that take advantage of ubiquitous technology as Ubiquitous-Learning's curtailment speech. Ubiquitous, user means Information-Communication surrounding that can connect to network freely regardless of place without feeling network or computer. There is controversy about introduction time regarding these direction, but e-Learning is judged to evolve by u-Learning necessarily. Because keep in step and age that study all contents that learner wants under environment of 3A (any time, any whrer, any device) by individual order thoroughly is foreseen to come in ubiquitous learning environment that approach more festinately.

• 동력기계공학회지
• /
• 제21권4호
• /
• pp.62-69
• /
• 2017

Because the moist foods like anchovy were appeared lower quality by hot air that occurred the lipid oxidation, the drying system by using the cold air has been used widely. This study has been carried out on the performance improvement according to arrangement angle of baffle and location of air duct in the cold air dryer. The main parameters in this study are the arrangement angles which are without, $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $40^{\circ}$, and the locations of air duct are without, front, center and back. For this study we have conducted the numerical analysis method using fluent in order to obtain the optimal condition of the drying performance. As the arrangement angle of baffle is increased, the relative humidity is proportionally decreased, the value at $40^{\circ}$ is 42.2% that indicate the reduction of about 4% than without it. After the air duct was installed, the decreased relative humidity is showed within 1%, therefore, the effect of air duct for improving the dry capacity is more large than the arrangement angle of baffle. Finally, we have obtained the optimal conditions that the arrangement angle is $40^{\circ}$ with the air duct for a cold air dryer.

• 산업경영시스템학회지
• /
• 제45권1호
• /
• pp.31-40
• /
• 2022

Six Sigma is a philosophy and systematic methodology for quality improvement. It encourages continuous quality improvement efforts to achieve the ideal goal of 6σ. Sigma(σ) is a statistic representing the standard deviation of the normal distribution, and 6σ level means a level where the tolerance of the specification is six times the standard deviation of the process distribution. In terms of the defective rate, the 6σ level achieves the 0.002 defectives per one million units. However, in the field, the 6σ level is used in the sense of achieving 3.4 defects per one million opportunities, which shows a large gap from the 6σ level in the statistical viewpoint. This is because field practitioners accept a 1.5σ shift of the mean of process when calculating the defective rate under sigma level. It said that the acceptance of 1.5σ shift of the mean is from experience, but there is no research or theoretical explanation to support it logically. Although it is a non-scientific explanation based on experience, considering that there has been no objection to the 1.5σ shift for a long time and it is rather accepted, it is judged that there is a reasonable basis for the 1.5σ shift. Therefore, this study tries to find a reasonable explanation through detective power of control chart via the run-rules to the 1.5σ shift empirically recognized by practitioners.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.1-6
• /
• 2015

Transmission of a tracked vehicle designed for multiple functions such as steering, gear-shifting, and braking is a core component of heavy vehicle to which the power is transferred based on combined technology of various gears, bearing, and fluid machineries. Robustness and durability of transmission, however, have been issued due to a large number of driving units and sub-components inside its body. The bevel gears are major components for the transmission of power in a transmission. Increasing the tooth surface roughness and chamfering of the bevel gears, especially, we aim to improve the quality of transmission. In this study, design structural evaluation is conducted on bevel gears of transmission for tracked vehicle using the ROMAX-DESIGNER program. By doing so, design safety of the bevel gears has been evaluated based on the gear strength theory of ANSI/AGMA 2003 B97 standard.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1565-1577
• /
• 2016

For grid-connected LCL-filtered inverters, dual-loop current control with an inner-loop active damping (AD) based on capacitor current feedback is generally used for the sake of current quality. However, existing studies on capacitor current feedback AD with a control delay do not reveal the mathematical relation among the dual-loop stability, capacitor current feedback factor, delay time and LCL parameters. The robustness was not investigated through mathematical derivations. Thus, this paper aims to provide a systematic study of dual-loop current control in a digitally-controlled inverter. At first, the stable region of the inner-loop AD is derived. Then, the dual-loop stability and robustness are analyzed by mathematical derivations when the inner-loop AD is stable and unstable. Robust design principles for the inner-loop AD feedback factor and the outer-loop current controller are derived. Most importantly, ensuring the stability of the inner-loop AD is critical for achieving high robustness against a large grid impedance. Then, several improved approaches are proposed and synthesized. The limitations and benefits of all of the approaches are identified to help engineers apply capacitor current feedback AD in practice.