• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2876-2882
• /
• 2015

The object of this study is to identify changes in air pollution in the maximum ground level concentration and the surrounding area when air pollution control facilities are improved in the thermal power plants. The effects of improved facilities are analyzed by comparing air quality after applying improved air pollution control facilities. For prediction of air quality, the change of wind field can be represented with movement of Puff and CALPUFF Model, air pollution diffusion models which can implement abnormal conditions. Major air pollutants of thermal power plants such as $SO_2$, $NO_2$, and $PM_{10}$ are selected as prediction items. That results show that improvement of air pollution control facilities is significantly effective in reduction of air pollution of $SO_2$ and $NO_2$ in the maximum ground level concentration and areas around of thermal power plants. In the case of $PM_{10}$, it is found that the effect of reduction in pollution is high in the maximum ground level concentration, but the effect of reduction in air pollution is somewhat low in the area around of the thermal power plant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.215-221
• /
• 2020

Navigation lights used in supersonic aircraft are used to identify the direction and location of the aircraft. The color of the navigation lights and location of installation are defined by aviation law as red for the left wing, green for the right wing, and white for the tail. Navigation lights operate in BRT and DIM modes. BRT is the brightest mode, and DIM is an output with dimmed brightness. Navigation lights serve to prevent aircraft collisions and are very important for stability and location identification. One phenomenon is that the inlet and tail navigation lights flicker abnormally. In this study, fault tree analysis was performed in two stages. The first step was derived from three causal factors, the second step developed five improvements, and the optimal improvement plan was drawn. The navigation lights confirmed that the initial input power was unstable as the main cause of abnormal flickering. As an improved method, the circuit was adjusted to stabilize the initial power, and it was confirmed that flickering did not occur as a result of the tests under the same conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.378-384
• /
• 2019

In the food wastewater treatment facilities, the water quality improvement effect and the greenhouse gas emission amount followed by the change in electricity usage through a change of the aeration tank ventilation system were evaluated. also, the amount of greenhouse gas emission followed by the change in electricity usage through the change of the sludge dewatering, storage, transporting method was also evaluated. The total GHG emission from food wastewater treatment facility improvement were divided into direct emissions from the treatment processes and indirect ones from electricity usage. The water quality improvement effect of wastewater treatment plant was found to be 63.3% for BOD removal rate, 42.0% for COD removal rate, 71.0% for SS removal rate and 39.6% for T-N removal rate. and according to the results of calculating output by applying both direct emissions of greenhouse gas (Scope 1) and the indirect emission (Scope 2) of greenhouse gas followed by changes in power consumption. It was estimated that there was a total of 276.0tCO2eq./yr(7.5%) greenhouse gas reduction effect from 3,668.8tCO2eq./yr before improvement to 3,392.8tCO2eq./yr after improvement. In this result is not due to the effects of water quality improvement of emission source, but because the reduction in electricity use has reduced the amount of greenhouse gas emissions.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.327-333
• /
• 2014

Changes in the business environment in which intense and sustained growth and survival must meet a variety of customer needs (Q, C, D) and business side of the enterprise for profit structure reformation is absolutely necessary for innovation activities. So far, management of innovation in method BPR, PI, OVA, 6 Sigma, Strategic Purchasing, PPM, SCM etc. are being introduced. However, they have a limit of partial optimization and improvement-oriented techniques. So this paper studied the TPI(Total Profit Innovation) application in order to derive empirical methodology to maximize profitability for the domestic S foundry factory. To this end, long-term gains through structural analysis and intensity analysis to ensure continued growth and profitability strategy are devised through management Innovation analysis. And improvement projects was presented to solve main issues of five categories(Inventory, Sales Mix, Cost, Quality Cost, Skill and Work-load) We will expect the office productivity improvement and financial performance improvement and then continually accumulate and review the results.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.1
• /
• pp.13-19
• /
• 2015

This paper presents the performance improvement of an EQS (Eradic Quake System) device applied to a nuclear power plant. For the nuclear facility, the EQS device needs to be ensured to have high quality, flexibility of design and reliability. To improve the reliability of the design, the hysteresis of the device must be exactly predicted. The friction coefficient of PTFE (PolyTetraFluoroEthylene) and the stiffness of the MER-Spring are considered as the factors influencing the hysteresis curve. In this paper, those factors are analysed to predict the behavior of the device and to improve the equipment of the EQS device. The results of the improved EQS device have been verified via a tests to be comparable with the predicted results. The estimation results indicate that considering those factors is more appropriate than the results of the previous design and method.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.199-208
• /
• 2022

The steel wire or steel bar processing process applied to the manufacture of various bolts and power transmission shafts was improved by applying in-line phosphate film treatment technology. By applying a polymer lubricant for a non-reactive metal forming process and a non-reactive non-phosphorus lubricating coating agent, the film formation for each process time was comparatively analyzed and reviewed. Compared to the nine processes applied previously, the in-line phosphate film treatment technology applied with only two processes has been effectively improved in terms of reduction of treatment time, reduction of facility installation area, prevention of water pollution due to wastewater, and non-use of ozone-depleting substances. In addition, it was found that it can have an important effect on productivity improvement and price competitiveness from the simplification of quality control and process control as well as improvement of the working environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1276-1295
• /
• 2023

Sensor networks are now an essential aspect of wireless communication, especially with the introduction of new gadgets and protocols. Their ability to be deployed anywhere, especially where human presence is undesirable, makes them perfect choices for remote observation and control. Despite their vast range of applications from home to hostile territory monitoring, limited battery power remains a limiting factor in their efficacy. To analyze and transmit data, it requires intelligent use of available battery power. Several studies have established effective routing algorithms based on clustering. However, choosing optimal cluster heads and similarity measures for clustering significantly increases computing time and cost. This work proposes and implements a simple two-phase technique of route creation and maintenance to ensure route reliability by employing nature-inspired ant colony optimization followed by the fuzzy decision engine (FDE). Benchmark methods such as PSO, ACO and GWO are compared with the proposed HRCM's performance. The objective has been focused towards establishing the superiority of proposed work amongst existing optimization methods in a standalone configuration. An average of 15% improvement in energy consumption followed by 12% improvement in latency reduction is observed in proposed hybrid model over standalone optimization methods.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.413-420
• /
• 2003

We can take 'Profit security', in the field Process improvement activity and man-power upgrade in the learning of organization activity or upgrading ability of each peoples. After Tayler System(Scientific Management in1911) and Ford System(Conveyor system in 1913), Toyota System(Ohno's TPS; Toyota Production System around 1980) which was developed by Toyota in Japan in the third productive revolution. This thesis study on the focus of 2 successful examples(P and S companies in Seong-Seo industrial complex Tae-Gu city) which introduce Toyota system can apply to VM(Visual Management), 3jeong(Right Products Right Quantity, Right Box and Right Position)5S(Seiri, Seiton, Seisoh Seiketsu, Sitsuke), JIT(Just In Time), KAIZEN(Improvement), KANBAN System(Logistic) and output of Factory. For examples P company obtained a lot of results(productivity increase 19%, Quality up 46%-36ppm, storage decrease 25% per year), S company obtained a lot of results(productivity increase 20%, Quality up 40%, storage decrease 33% per year, 2600 improvements in 2002. In conclusion Korean KANBAN system (modified Toyota System) is similar to exchange of work as Korean traditional system in agriculture as like dure 'PUMASHI' SANGBU-SANJO) that's autonomous management systems. In conclusion Korea KANBAN system needs apply to not only all the manufacturing industry but also the various fields of industry.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.4
• /
• pp.99-112
• /
• 2007

In most recent years, the business competition has spreads over all fields of corporations and their management area regardless of time and place, which makes the survival environment of each enterprise fiercer. In order to secure a high position in the competitive market, the various firms has implemented many methods related to price, quality, and service efficiency. However, the implementation with only low price or high quality might be helpless to hold a high position in modem market. Moreover more attention should be paid to the internal business processes of an organization. Therefore, a new and different method should be searched or developed in order to win the competitive power among other enterprises. This research will focus on the improvement of the business processes within the non-manufacturing industry by applying Lean Six Sigma methodology. DMAIC method will be applied to improve the inbound and outbound logistics processes, manage the inbound and outbound vehicles, and control the receiving and shipping activities.

• Quality Improvement in Health Care
• /
• v.1 no.1
• /
• pp.110-118
• /
• 1994

As the first step to improve the medical recording for the hospitalized patients, we tried to identify problems of completion rate of the medical recording and made the completion rate of the medical recording within due date known to the public in the hospital and commended the best Department and resident officially. The results were as follows: 1. The average number of the medical recordings per a recorder by years of residency(average number to quorum) was 293.3(398.8) in 1st year, 82.5(68.1) in 2nd year, 21.2(8.3) in 3rd year, and 20.5(1.9) in 4th year-residents. There was only 2 residents who prepared the medical recordings more than the average of 125.6 recordings per a resident. 2. Among 13 Departments, the medical recording was wholly put in charge of the 1st year-resident in 6 Departments. The duty was shared with the 2nd year-resident in 5 Departments and the 3rd year-resident in 1 and the 4th year-resident in Only 1 Department. 3. The more the cases requiring the medical recording, the lower the completion rate(80% less than 100 recordings, 70% in 100-299, 60% in 300-399 and 33.3% in more than 400). 4. There was no difference in the completion rate of the medical recording before(1991) and after(1993) a public nitice(1992). However, 4 Departments showed improvement of 21-45% in the completion rate, and no case was found where billing for medical assurance was postponed due to delayed completion of the medical recording. 5. The completion rate was relatively low(72-78%) from January to March. The main reasons were shortage of men power due to preparation of board examination, attendance to military duty, and lack of training in the medical recording for the new 1st year-residents. 6. The official commendation of the best Department and resident by letters did not improve the completion rate of the medical recording. In conclusion, The main reason of the low completion rate of the medical recording was the fact that the 1st year-residents were almost exclusively responsible for the medical recording. Hence, it is mandotory that this practice gets staffs' attention to improve the completion rate. Public notice of the completion rate of the medical recording shows prompt improvement of the completion rate. Prize money rather than commendation by a letter for the best Department would also be more effective to improve the quality of medical recording.