• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.423-429
• /
• 2008

Currently, Ash-free clean coal producing process by solvent extraction is under development. The produced ash-free clean coal can be directly combusted in a gas turbine which results in substantial improvement of power generation efficiency. However, the clean coal produced by the solvent extraction still contain trace amount of alkali metal which may cause corrosion on turbine blades during the direct combustion. In present work ${\alpha},{\beta}$-metal (Zr and Ti) phosphates and H-Y zeolite were synthesized and their ion exchange characterizations were investigated for the application on alkali metal removal for clean coal production. $Na^+$ ion removal capacities of the metal phosphates and H-Y zeolite were measured and compared in both aqueous solution (100 ppmw, $Na^+$) and coal dissolved N-methyl-2-pyrrolidone (NMP, 12 ppmw $Na^+$) at elevated temperature. In aqueous solution, the ${\beta}$ form metal phosphates showed very high ion exchange capacities compared to ${\alpha}$ form. ${\beta}$ form metal phosphates also showed higher $Na^+$ removal capacities than H-Y zeolite. In ion exchange medium of NMP, all the ${\alpha}$ form metal phosphates showed over 90% of $Na^+$ ion removal efficiency in the temperature range of 200 to 400 while that of H-Y zeolite decreased as a half when the temperature was over 350. In addition, the regenerated metal phosphates by acid treatment showed no sign of degradation in $Na^+$ removal efficiency. Among the metal phosphates used, $Zr_{0.75}Ti_{0.25}(HPO_4)_2$ showed the best performance in $Na^+$ removal and is expected to be the most suitable inorganic ion exchanger for the alkali metal removal process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of Mushroom
• /
• v.15 no.1
• /
• pp.45-53
• /
• 2017

Profitability of farmers has decreased mainly owing to low price while the gross amount of mushroom production has increased continuously in South Korea. In this regard, analyzing patterns of mushroom consumption is believed to be meaningful. We used a panel data set consisting of 667 families, from 2010 to 2015. Based on the panel data, mushroom consumption patterns of people living in city areas were examined. Multiple descriptive analysis methods and frequency analysis approaches were adopted in this study in terms of time and space dimensions, demographic properties, and purchase behaviors. The findings of this studyshow that mushroom purchase is highly dependent on seasonal events, which implies that the product consumption timing is predictable. In addition, yearly purchase amount patterns reflect that superstores have become the major mushroomtrading venues. This directly supports the need to establish supply chain capabilities for mushroom farmers so that they gain more bargaining power against enterprise-type groceries. Finally, functional features of mushroom can be linked with marketing promotion because purchase patterns demonstrate potential needs for healthcare food in mushroom categories. Based on the analyzed patterns, this paper provides insightful implications for policy makers who want to promote mushroom consumption.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.224-243
• /
• 2020

The rock-cut relief of two Buddhas seated side-by-side in Wonpungri is a large Buddha sculpture in relief on the side of a cliff in Wonpung-ri, Goesan. This Buddha sculpture is from the Buddhist scripture Sutra of the Lotus. <法華經> Two seated Buddhas statues were prevalent in the Balhae Kingdom, but this was not popular in Silla and Goryeo. In the main text, the time that the two seated Buddhas in Wonpung-ri was created is identified as being during the 10th century. King Gwangjong created a Buddha statue for political purposes. The relief of two seated Buddha image carved on a cliff is located on an important traffic route over the Sobaek Mountain Range. After King Gwangjong took the throne, he paid close attention to the reigning powers of Jincheon and Cheongju because the people of Jincheon and Cheongju were engaged in a power struggle against Gwangjong. The huge relief of two seated Buddhas statue shows the authority of King Gwangjong. In particular, the people of Jincheon and Cheongju had to see this Buddha statue when crossing the Sobaek Mountain Range. The image contained in the relief of the two seated Buddhas features many characteristics of the sculpture style of the Balhae Kingdom. After the fall of Balhae, many of the Balhae people settled in Mungyeong. Balhae people from Mungyeong participated in the production of the relief of the two seated Buddhas. Through the relief of the two seated Buddhas, King Gwangjong wanted to show the people of Jincheon and Cheongju that the Balhae people were supporting him. The relief of two seated Buddhas reflects the historical situation of the King Gwangjong era in the late 10^th century and the style of sculpture.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.125-133
• /
• 2000

Specific carotenoids and astaxanthin biosynthesis power of Phaffia rhodozyma mutant 876, which was obtained after NTG a and UV treatments, was higher than those of the wild type by 40% and 50%, respectively. The mutant strain did not show t the catabolite repression even at 22% (w/v) glucose concentration. The optimum C{N ratio was 2.0, and the optimum t temperature and initial pH were $22^{\circ}C$ and 6.0, respectively. 80th cell growth and astaxanthin formation decreased drastically a as the fermentation temperature was increased over $22^{\circ}C$, whereas they were comparable in the pH range between 5.0 and 7 7.0. Inoculum size did not affect the final cell density nor the carotenoids biosynthesis, and 3%(v/v) was selected as optimal. H Higher dissolved oxygen concentration facilitated astaxanthin biosynthesis, and aeration rate of 1.0 v/0/m and agitation speed of 400 rpm were selected as optimum. The final cell dens때 of 43.3 g/L and the volumetric astaxanthin and carotenoids concentrations of 110.6 mg/L and 149.4 mg/L, respectively, were obtained. The specific carotenoids concentration was 3.45 m mg{g-yeast(dry). Yx/s and Yp/s values of 0.37 and 1.08 were obtained. The result of this study will provide basic information u useful for mass production of astaxanthin from P. rhodozyma fermentation.

• Journal of Food Hygiene and Safety
• /
• v.35 no.5
• /
• pp.503-512
• /
• 2020

To enhance the usability of puffed rice, we evaluated the quality characteristics and antioxidant activity of vinegar made with puffed rice and lemon balm. First, puffed rice containing lemon balm extracts was fermented for alcohol production. The alcoholic fermented liquid was adjusted to an alcohol content of 6% and an initial acidity of 2% for vinegar fermentation. The pH and alcohol content of the lemon balm vinegar decreased overall as fermentation progressed. The total acidity was 5.20±0.01% (2.0% lemon balm) to 5.80±0.01% (0.0% lemon balm) on the 15th day of fermentation, and the total acidity was slightly lower as the amount of added lemon balm was increased. Citric, succinic, and acetic organic acids were detected in the vinegar and the acetic acid content was highest at 4.81% to 5.37% on the 15th day of fermentation. We found that the total polyphenol and total flavonoid content of the lemon balm vinegar increased as we added lemon balm, and the content on the 15th day of fermentation was 179.4±4.5 (0.0% lemon balm) - 340.8±2.6 mg/kg (2.0% lemon balm) and 1.5±0.3 (0.0% lemon balm) - 31.7±0.3 mg/kg (2.0% lemon balm), respectively. The higher the amount of lemon balm added, the higher the DPPH radical scavenging activity, the FRAP (reducing power), and the ABTS radical scavenging activity. Moreover, those activities after 2.0% lemon balm treatment were 82.99±0.61%, 1.08±0.01 abs., and 87.67±0.68%, respectively, on the 15th day of fermentation. These results suggest that vinegar with added lemon balm may be used as an antioxidant agent.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.69-74
• /
• 2010

Black garlic has recently received significant attention due to its various health functional properties, and there has been an increase in demand for its use as a functional food. This study was performed to determine the optimum concentration for the fermentation of black garlic yakju. In addition, the antioxidant activity of the fermented black garlic yakju was examined. The alcohol content in the black garlic yakju significantly increased for 6 days and the pH gradually increased as the concentration of black garlic increased. The reducing sugar content at each black garlic concentration was maximal when it was fermented for 24 hours, and then rapidly decreased at longer fermentation periods. The main organic acids were lactic, citric, malic and oxalic acid. Also, the lactic acid content increased as the concentration of the black garlic increased where as the content of other organic acids decreased. The total polyphenol content, ferric ion reducing antioxidant power (FRAP) activity and DPPH (1,1-diphenyl-2-picryl-hydrazyl) free radical scavenging activity of black garlic yakju increased as the concentration of black garlic increased. The sensory characteristics of fermented black garlic yakju were evaluated in terms of color, flavor, taste and overall acceptability, and the highest overall acceptability value was obtained for yakju containing a black garlic concentration of 1-3%. Therefore, the optimum concentration of black garlic was determined to be 1% for the production of high quality black garlic yakju.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1017-1024
• /
• 2014

This study was carried out to develop mulberry wines fermented with traditional microorganisms (Saccharomyces cerevisiae B-8). S. cerevisiae B-8 is a traditional fermentation microorganism isolated from domestically grown Rubus occidentalis. Each S. cerevisiae B-8 and Fermivin was inoculated into mulberry up to $1{\times}10^9$ CFU/kg, followed by incubation at $25^{\circ}C$ for 10 days. Mulberry fermented with S. cerevisiae B-8 (MBB) had a high alcohol content (16.47%), and the fermentation rate of MBB was faster than that of mulberry fermented with Fermivin (MBF). The total polyphenol and flavonoid contents of MBB were higher than those of MBF. DPPH radical scavenging activity of MBB was as high as that of MBF. ABTS radical scavenging activity of MBF was higher than those of MBB and mulberry juice (MBJ). In addition, reducing power of MBB was much higher than other samples. Flavor constituents of the two fermented wines were analyzed by gas chromatography and mass spectrometry. Twenty-three compounds from the sample were separated and identified as fifteen esters, six alcohols, an aldehyde, and an acetate. Particularly, tetradecanoic acid, ethyl ester of orris and violet flavor were ten times more abundant in MBB than in MBF. Several ester components were two times more abundant in MBB than in MBF. In conclusion, current findings indicate that MBB might have better antioxidant activities with flavor, which contributes to improved wine production with high quality and function.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.348-355
• /
• 2000

This paper described the relationship between the behavior of the Israeli carp, Cyprinus carpio and the environmental noise level due to the dynamite explosion work. The experiment was conducted in the cage ($L10{\times}W4{\times}D4 m$) of aquaculture located at Chungjoo Lake, Chechon, in 1997. The fish trajectory was obtained by the telemetry system in which a pulsed ultrasonic pinger ($50 kHz, {\phi}16{\times}L70 mm$) attached to the fish was tracked three dimensionally, and the underwater noise levels were measured. The results of the study were as follows: 1. The underwater noise levels in the normal blasting measured at a distance of 400 m from the source of noise increased by $40 dB (re 1 {\mu}Pa)$ compared to the levels before explosion. The dominant frequency and the increased power spectrum level of the underwater noise by the explosion work were $75 to 100 Hz and 22.9 to 35.3 dB$, respectively. 2. The underwater noise levels in the test blasting measured at a distance of 350 m from the source of noise increased by average $49.5 dB (re 1 {\mu}Pa)$compared to the levels before explosion. 3. The swimming area of the fish was reduced with the time after explosion, and after more than one hour the fish represented the similar swimming area and behavior to the status of right before explosion. 4, The swimming depth layer of the fish was most of the case at the sea surface less than 1,0 m except during explosion or right after of it. But the fish swam downward when an external stimulus like the explosion noise was given to the fish. 5. The average swimming speeds of the fish before, during and after the works were about 1.2 times, 1.9 times and 1.0 times of the body length, respectively, and the speed of the fish with explosion was faster 1.6 times than the speed without of that. Consequently, the explosion noise levels measured by this study were sufficiently high to affect the fish, and the heavy shock by the explosion works could produce a considerable unfavorable effects to the fish.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2011

During the maintenance, repair and replacement process of circuit breaker, $SF_6$ reacted with input air in arc discharge, which led to the production of by-product gases (eg, $N_2$, $O_2$, $CF_4$, $SO_2$, $H_2O$, HF, $SOF_2$, $CuF_2$, $WO_3$). Among these various by-product gases, $N_2$, $O_2$, $CF_4$ is major component. Therefore, the effective separation process is necessary to recycle the $SF_6$ gas from the mixture gas containing $N_2$, $O_2$, $CF_4$. In this study, the membrane separation process was applied to recycle the $SF_6$ gas from the mixture gas containing $N_2$, $O_2$, $CF_4$. The concentration of $SF_6$ gas in gas produced from the electric power industry is over than 90 vol%. Therefore, we made the simulated gas containing $N_2$, $O_2$, $CF_4$, $SF_6$ which the concentration of $SF_6$ gas is minimum 90 vol%. From the results of membrane separation process of $SF_6$ gas from $N_2$, $O_2$, $CF_4$ $SF_6$ mixture gases, PSF membrane shown the highest recovery efficiency 92.7%, in $25^{\circ}C$ and 150 cc/min of retentate flow rate. On the other hand, PC membrane shown the highest recovery efficiency 74.8%, in $45^{\circ}C$ and 150 cc/min of retentate flow rate. Also, the highest rejection rate of $N_2$, $O_2$, $CF_4$ is 80, 74 and 58.9% seperately in the same operation condition of highest recovery efficiency. From the results, we supposed the membrane separation process as the effective $SF_6$ separation and recycle process from the mixture gas containing $N_2$, $O_2$, $CF_4$, $SF_6$.