• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.570-572
• /
• 2000

In this paper, we present the configuration of Direct Load Control System using TCP/Ethernet Module for the Load Management Europe and America has operated the DLC system by many communication system, and Taiwan, Japan has controlled the cooling load at peak hours of power system. Up to now, Many Researches for the DLC of communication method, so called, pager, power line carrier, ripple control, etc. has advanced. Now, we present new communication method for the DLC using TCP/Ethernet module which is widespread all over the world.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3051-3053
• /
• 1999

In recent years, it becomes a worldwide trend that the power utilities focus their attention to Demand Side Management. Increasing Electric power consumption, they adopt a direct load management to accomplish low cost and stability of electric supply. Following this trend, KEPCO is researching a Direct Load Control System for Air Conditioner. This Paper presents the development results of the Direct Load Control System to Control electric power consumption of Conditioner in summer period this year.

• Journal of Hydrogen and New Energy
• /
• v.30 no.2
• /
• pp.155-162
• /
• 2019

The energy management technology for an independent fuel cell-battery hybrid system is developed for a household usage. To develop an efficient energy management technology, a simulation model is first developed. After the model is verified with experimental results, three energy management schemes are developed. Three control techniques are a fuzzy logic control (FLC), a state machine control (SMC), and a hybrid method of FLC and SMC. As the fuel cell-battery hybrid system is used for a house, battery state of charge (SOC) regulation is the most important factor for an energy management because SOC should be kept constant every day for continuous usage. Three management schemes are compared to see SOC, power split, and fuel cell power variations effects. Experimental results are also presented and the most favorable strategy is the state machine combined fuzzy control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.178-178
• /
• 2000

In this paper, intelligent methods using digital protection relay in power management and control system is developed in order to protect power systems by means of timely fault detection during operation and control at starting for induction motor which have various load environments and capacities in power systems. The digital protective relay was designed with DSP CPU(TMS320C31) to Protect and measure more quickly and precisely. The test result on the basis of KEMCl120 and IEC60255, show that the operation time error of the digital motor protection relay is improved within $\pm$5%. Also, we can control motors at starting according to starting types with simple method as programmable sequence editor. So we can improve the demerits of high cost and much manhour for rework.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1581-1585
• /
• 2005

This paper describes the design and implementation of a XCP (Xeline Control Protocol) network system. XCP is an information oriented protocol which delivers information with high reliability according to the predefined rule. The XCP network system is implemented with partly hardware and partly software based on the power line communication(PLC) environment. A network management tool which interacts with devices is also developed. In order to verify the feasibility of the proposed architecture, the implemented XCP network system is evaluated using a lighting control system.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.269-272
• /
• 2016

Distribution management system or microgrid energy management system plays an important role in monitoring, operation and control of electrical distribution systems by utilizing IT infrastructure. Nowadays, the rapid increase of the distributed resources makes the conventional management system have some additional functionality for the reliable operation due to intermittent renewables and the efficient operation on the economical purpose. In this paper, the brief standard software functional requirements of microgrid energy management system are provided through survey of the recent commercial products of the major vendors, and furthermore the architectures of microgrid energy management system are provided in comparison with major suppliers' microgrid energy management system. The summary of investigation will be able to make the developers and researchers focus on the specific functionality in the real world.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.505-510
• /
• 2009

In this paper, building energy analysis and energy cost of power stand up and demand control over the power proposed to reduce power demand. Through analysis of the load power demand special day were able to apply the pattern. In addition, the existing rate of change of load forecasting to reduce the large errors were not previously available data. And daily schedules and special day for considering the exponential smoothing methods were used. Previous year's special day and the previous day due to the uncertainty of the load and the model components were considered. The maximum demand power control simulation using the fuzzy control of power does not exceed the contract. Through simulation, the benefits of the proposed energy-saving techniques were demonstrated.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1471-1478
• /
• 2016

In this study, the system to manage the power automatically was implemented by using Arduino, Raspberry pi, and Beacon technologies. Before the research, pre-research was carried out with the analysis on the existing power management systems in the market in order to find a solution to reduce burdens from standby power and power waste with the increase of electric charges. The system is designed to be able to deliver and receive data through IEEE 802.15.4 wireless protocol, by using Xbee module. Arduino was tested to verify whether it is able to control SSR(Solid State Relay), and it was found that there is no problem. Meanwhile, it was also tested whether it is possible to organize a star topology network through Arduino and Raspberry Pi, and it was confirmed that normal wireless communication is possible through IEEE 802.15.4 wireless protocol. It is designed that the signal from Android smartphone application is to be delivered to Raspberry Pi and then, to be delivered to Arduino through Xbee so that Arduino could control SSR. In addition to this, wireless protocol required to control Arduino with Raspberry Pi is also designed and applied to this research.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.3
• /
• pp.49-57
• /
• 2013

Power-saving PC software enables the inexpensive power control, but the installation of the power-saving software in all computers in the organization is not an easy task. Computer users in the organization are usually not cooperative as they do not think the power-saving cost is directly related to themselves. The PC power-saving system provides advantage to driving active participation in which users installs the power saving software by restricting IP address through the power management server. However, the problem with this approach is the security vulnerability to IP spoofing attacks, therefore we need to solve the problem that disrupt the entire network system rather than saving electric power. This paper proposes the security authentication system that can implement the efficiency saving power by providing high security for the members' computer system of the public institutions based on the PC power-saving system. Also, by analyzing it in comparison with other method, it is possible to check that the prospects of safety and efficiency are strengthened.