• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.53-54
• /
• 2005

This paper describes that send some signal from encoder attached to crankshaft of marine-engine to measuring instrument using power line modem(PLM) and display cylinder pressure, rpm and etc. on LCD. Conventional method that sends signal along the long signal line has some inconvenience from too long signal line length caused by huge volume of ship's engine. Power line modem can have short signal line from outlets to measuring instrument. Because it use exist power line for send signals, so it have low installation cost and could have good merits in job sites. Through this experiment, pressure in cylinder, engine rpm and etc. signals through PLM are well recognized at measuring instrument.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.103-106
• /
• 2002

This paper has studied a remote AMR(Automatic Meter Reading) system using the power line and the telephone line as a communication media and the digital power meter. In the developed system, because we have used the power line and telephone, the facility is very easy and then its cost is not expensive. The system includes following elements: a digital power meter, an indoor communication system using a power line modem and a telephone line interface system for sending data to the utility company.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3132-3134
• /
• 1999

To realize the power line communication system, the line coupler is one of the most important systems, which must be adjustable to the power line characteristics. In this paper, three kinds of line couplers were designed and simulated with the Pspice, which could be useful to the power line communication systems in C-Band(95kHz-148.5kHz) frequency

• 대한전자공학회논문지TC
• /
• 제45권2호
• /
• pp.83-91
• /
• 2008

전력선 통신을 이용한 MH(메탈핼라이드) 램프용 조광제어시스템을 구성하기 위하여, 전력선 모뎀 및 MH 램프용 전자식 안정기를 설계하고, 안정기가 전력선 채널에 미치는 영향을 분석하였다. 전력선이 통신채널로써 사용될시 채널의 특성은 부하에 의하여 변화하게 되므로, 부하는 전력선 통신에 적합하도록 설계되어야 한다. 따라서 본 논문에서는 전력선 통신에 적합한 전자식 안정기를 제안하고, ASK와 FSK 두 종류의 전력선 모뎀을 설계하여 맨체스터 코드와 DS/SS 방식을 각각 적용하였다. 실험결과, DS/SS 방식이 적용된 FSK 전력선 모뎀이 가장 우수한 특성을 갖는 것으로 확인 되었다.

• 한국정보통신학회논문지
• /
• 제14권12호
• /
• pp.2642-2648
• /
• 2010

본 논문은 해상용 VHF 디지털 모뎀의 구성요소 중 하나인 방향성 결합기 및 정류회로의 설계에 관한 것이다. 모뎀을 통해 송신되는 전력을 모니터링하기 위해, 송신 신호의 일부를 추출하는 방향성 결합기와, 결합된 RF 신호에 비례하는 DC 전압을 만들어내는 정류회로를 설계 제작하였다. 160 MHz 대역에서 25 dB 이상의 지향성을 갖는 평행 결합 선로 결합기를 구현하여, 모뎀 송신 전력이 1 W ~ 25 W로 변할 때 정류회로의 출력 전압이 약 0.85 V ~ 1.6 V로 선형적으로 변하는 것을 확인하였다. 제안된 결합기 및 정류회로는 해상용 VHF 디지털 모뎀에 유용하게 사용될 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.558-561
• /
• 2002

In the embodiment of power line modem, the important elements are selection of a suitable line-coupler, choice of a modulation method good for channel environments, and an efficient data coding method etc. In this paper an appropriate modulation method was implemented their results in details and verified by the simulations. The data compensation request techniques that uses error checking was discussed. Finally, application of other modulation method by detection of error rate per bit according to vary of channel error caused by electric equipment that is connected to power line was studied.

• 한국통신학회논문지
• /
• 제27권7C호
• /
• pp.723-727
• /
• 2002

가정용 가스레인지를 사용함에 있어 사용자 및 설치자의 부주의 등으로 재산 피해 밑 인명 사고가 빈번히 발생하고 있기 때문에 본 논문에서는 기존의 전화망과 전력선 모뎀을 이용하여 외부에서 가정내의 LPG 가스레인지의 밸브를 제어 및 상태를 확인하는 시스템을 개발하였다. 본 시스템의 구성은 외부에서 가정까지의 연결을 위한 전화 인터페이스와 전력선을 매체로 한 가정내의 통신 시스템 및 가스밸브 차단 및 알림 장치로 이루어 졌다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권2호
• /
• pp.182-189
• /
• 2007

This paper describes the implementation of control and monitoring system of ship's lamps at local area using power line communication method, power line modem(PLM). We design modem, microprocessor interface for electric power control by frequency control and analog to digital signal conversion, lamp device. PLM communication is very economical using existing electric power line unlike RS-232, RS-485 communications. We verify and confirm by experimental work that control and monitor lamp system for ship by an PLM communication.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.65-67
• /
• 2001

PLC (Power Line Communication) is the communication method using the existing power line installed in houses and offices to convert and transmit high frequency communication signal from tens of KHz to tens of MHz, and receive the filtered signal using high frequency filter. The advantage of PLC is that PLC uses the existing power line installed in houses and offices so it does not require separate power line. Easy and convenient access using electric outlets is another advantage of PLC. However, PLC has some disadvantages such as limited transmission power, high load interference and noise, variable signal attenuation, characteristic of impedance selective possibility of frequency property. This study designed the boiler temperature control system by unit using the modem designed on the basis of technology used for PLC modem, and designed remote control system using internet. After conducting experiments with those two systems, it was possible to control stably. By commercializing this product, we can avoid unnecessary heating of separate temperature control unit, and save the cost according1y, and it is possible to control on a remote site using internet in a more convenient way.

• 산업기술연구
• /
• 제21권A호
• /
• pp.207-211
• /
• 2001

For the power line communication, we studied its characteristic impedance, noise characteristics, loss characteristics and the coupling circuit between the communication MODEM and power lines. As the results of the experiments, we concluded that the power line impedance in a house varied in the wide range because the electric systems generate the current and voltage hamornic noises.