• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.213-217
• /
• 2012

The amount of spent fuel from nuclear power plants has been increasing. An effective management plan of the spent fuel becomes a critical issue, because the storage capacity of each plant will reach its storage limit in a few years. The volume of high toxic spent fuel can be reduced through a fuel processing. Advanced Fuel Cycle (AFC) system is considered to be one of the options to reduce the toxicity and volume of the spent fuel. It is necessary to set up a test facility to demonstrate the feasibility of the process at the engineering scale. The objective of the work is a development of the safety evaluation technology for the AFC system. The evaluation technology of the AFC structural integrity and processes were surveyed and reviewed. Key evaluation parameters for the main processes such as electrolytic reduction, electrorefining, and electrowinning were obtained. The survey results may be used for the establishment of the AFC regulatory licensing procedure. The establishment of the licensing criteria minimizes the trials and errors of the AFC facility design. Issues taken from the survey on the regulatory procedure and design safety features for the AFC facility provide a chance to resolve potential issues in advance.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.515-520
• /
• 2020

CMOS used in digital circuit design technology has reached the limit of integration due to quantum tunneling. Quantum-dot cellular automata (QCA), which can replace this, has many advantages such as low power consumption and fast switching speed, so many digital circuits of CMOS have been proposed based on QCA. Among them, the multiplexer is a basic circuit used in various circuits such as D-flip-flops and resistors, and has been studied a lot. However, the existing multiplexer has a disadvantage that space efficiency is not good. Therefore, in this paper, we propose a new multilayered multiplexer using cell interaction and D-latch using it. The multiplexer and D-latch proposed in this paper have improved area, cell count, and delay time, and have excellent connectivity and scalability when designing large circuits. All proposed structures are simulated using QCADesigner to verify operation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2000

In this paper, we study a cause of malfunction of switch to control drive motor in DFMS(Digital Flux Mapping System) which can measure incore neutron flux of the nuclear plant, and develope a method to solve this problem. DFMS has the type of generating contact signal by mechanical switch lever, which is operated whenever thimble detector inserted or withdrawed through thimble Guide Tube. However the characteristics of the lever tend to be changed by mechanical degrade or bad environment and the lever finally generates errotic contact signal. Therefore we installed electric coil ass'yin the outside of Guide Tube instead of mechanical switch assy's. In addition we applied resonance effect to control circuit and installed condenser in the input of power supply to protect noise and interference. After completion of this improvement, we tested this improved device repetitively under the various conditions. In conclusion, we identified the generation of the desired contact signal and the prevention of detector failure through plant surveillance test during normal plant operation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.434-437
• /
• 2016

In this paper, we consider a measurement allocation problem for gathering reliable data from a spatially correlated sensor field. We allocate the probability of each sensor's being measured considering its marginal contribution in entire data gathering; higher measurement probability is given to a sensor that gives higher reilable data. First we establish a correlation model considering limit in each sensor's transmission power, noise in the process of measurement and transmission, and attenutations in wireless channel. Then we evaluate the reliability of gathered data by estimating distortion error in sink node. We model the measurement allocation problem in spatially correlated sensor field into a cooperative game, and quantifiy each sensor's marginal contribution using Shapley Value. Then, the probability of each sensor's being measured is given in proportion to the Shapley Value.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.162-168
• /
• 2012

This paper considers the scenario in which a set of nodes share a common channel. Some nodes have a rechargeable battery and the others are plugged to a reliable power supply and, thus, have no energy limitations. We consider two source-destination pairs and apply the concept of cognitive radio communication in sharing the common channel. Specifically, we give high-priority to the energy-constrained source-destination pair, i.e., primary pair, and low-priority to the pair which is free from such constraint, i.e., secondary pair. In contrast to the traditional notion of cognitive radio, in which the secondary transmitter is required to relinquish the channel as soon as the primary is detected, the secondary transmitter not only utilizes the idle slots of primary pair but also transmits along with the primary transmitter with probability p. This is possible because we consider the general multi-packet reception model. Given the requirement on the primary pair's throughput, the probability p is chosen to maximize the secondary pair's throughput. To this end, we obtain two-dimensional maximum stable throughput region which describes the theoretical limit on rates that we can push into the network while maintaining the queues in the network to be stable. The result is obtained for both cases in which the capacity of the battery at the primary node is infinite and also finite.

• Journal of Digital Contents Society
• /
• v.14 no.2
• /
• pp.255-262
• /
• 2013

Useful applications for English education enable immediate conversion of mobile devices into remote wireless systems for classroom computers. Once the free software has been installed in the main computers in the classroom, using powerpoint, students can operate the computers through their mobile devices by installing Air mouse on them. By using this, the students can draw or write on the "board" to manipulate the educational resources from where they are/from their seats. The study of English language encompasses not only academic study but also language training. Until recently, the issue of the English language learning has been ridden with certain problems-instead of being a tool that facilitates communication, its main purpose has been for school grades, TOEIC, and TOEFL. This study suggests English language learning methodology using various applications such as mobile, VOD English language content, and movie scripts in implementing easy and fun English language learning activities that can be studied regularly. This is operationalized by setting a specific limit on learning and by using various media such as podcast, Apps, to increase interest, motivation, and self-directed learning in a passive learning environment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.273-281
• /
• 2010

In this paper, a method to predict the fatigue life of an axle drive shaft by the calibrated accelerated life test (CALT) method is proposed. The CALT method is very effective for predicting lifetimes, significantly reducing test time, and quantifying reliability. The fatigue test is performed by considering two high stress and one low stress levels, and the lifetime at the normal stress level is predicted by extrapolation. In addition, in this study, the major reliability parameters such as the lifetime, accelerated power index, shape parameter, and scale parameter are determined by conducting various experiments. The lifetime prediction of the axle drive shaft is verified by comparing the experimental results with load spectrum data. The results confirm that the CALT method is effective for lifetime prediction and requires a short test time.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.319-323
• /
• 2011

In this paper presents a new model of dual-mode synchronous buck converter with dynamic control for mobile applications was proposed. The proposed circuit can operate at 2.5MHz with supply voltage 2.5V to 5V for low ripple and minimum inductor and capacitor size, which is suitable for single-cell lithium-ion battery supply mobile applications. For high efficiency, the proposed circuit adopts synchronous type and dynamic control. The proposed circuit is designed by using the device parameter of TSMC 0.18um BCD process and the performance is evaluated by Cadence spectre. Experimental board level results show the maximum conversion efficiency is 96% at 100mA load current.

• Journal of Arbitration Studies
• /
• v.16 no.3
• /
• pp.161-189
• /
• 2006

This paper is aiming at analyzing case law of India in relation with reasonable time to make decision whether to accept or to refuse the documents received from the presenter in credit transactions. As specified in UCP, the failure to refuse to accept the documents within a reasonable time precludes the Issuing Bank, Confirming Bank (if any) and Nominated Bank from asserting that they are discrepant. Compliance of the stipulated documents on their face with the terms and conditions of the credit shall be determined by international standard banking practice as reflected in this Articles of UCP 500. The Issuing bank is only to be held responsible for honoring the documents presented by beneficiary through the nominated banks if they are strictly in compliance with terms and conditions of the Credit. As any well experienced banker knows, however, a word-by-word, letter-by-letter correspondence between the documents and the credit terms means a practical impossibility. Thus the notion of reasonable care in conjunction with the doctrine of strict compliance mixed with International Standard Banking Practices has not played a right functional standard for checking the documents as stipulated in the credit and UCP 500. And so the rejection rate is highly estimated at approximately 50% in EU and 40 to 70% according to their geographical locations in the USA. As a result, it can possibly be inferred from this fact that the credit industry would be facing the functional failure as the international trade credit facility, if not supported with motive power as a relevant scheme in UCP 500. It is quite important to note that UCP 500 Article 13(b) which specify the time limit for the banks to notify the presenter their decision not to accept the documents within a reasonable time not to exceed seven banking days following the day of receipt of documents would be the motive engine to improve the negotiability of documents in international trade financial facility.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.721-733
• /
• 2017

When temporary spent fuel storage pools at nuclear power plants reach their capacity limit, the spent fuel must be moved to an alternative storage facility. However, radioactive materials must be handled and stored carefully to avoid severe consequences to the environment. In this study, the risks of three potential accident scenarios (i.e., maritime transportation, an aircraft crashing into an interim storage facility, and on-site transportation) associated with the spent fuel transportation process were analyzed using a probabilistic approach. For each scenario, the probabilities and the consequences were calculated separately to assess the risks: the probabilities were calculated using existing data and statistical models, and the consequences were calculated using computation models. Risk assessment software was developed to conveniently integrate the three scenarios. The risks were analyzed using the developed software according to the shipment route, building characteristics, and spent fuel handling environment. As a result of the risk analysis with varying accident conditions, transportation and storage strategies with relatively low risk were developed for regulators and licensees. The focus of this study was the risk assessment methodology; however, the applied model and input data have some uncertainties. Further research to reduce these uncertainties will improve the accuracy of this model.