• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.267-273
• /
• 2013

In order to provide effective operating conditions for the fan in a wet cooling tower with film fill, a new program to search for the minimum fan power was developed using a model of the optimal total annual cost of the tower based on Merkel's model. In addition, a type of design map for a cooling tower was also developed. The inlet water temperature and heat load were considered as key parameters. The present program was first validated using several typical examples. The results showed that for a given heat load, a three-dimensional graph of the fan power (z-axis), mass flux of air (x-axis, minimum fan power), and inlet water temperature (y-axis, maximum of minimum fan power) showed a saddle configuration. The minimum fan power increased as the heat load increased. The conventionally known fact that the most effective cooling tower operation coincides with a high inlet water temperature and low air flow rate can be replaced by the statement that there exists an optimum mass flux of air corresponding to a minimum fan power for a given inlet water temperature, regardless of the heat load.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.62-72
• /
• 2010

PM OLED is used in many applications as one of the display for the next generation. The most essential problems are the power dissipation and the short life time in applying PM OLED into a commercial application. Many efforts are made in developing the panel and in improving the circuit for expanding the current market wider. The life time in PM OLED is expanded by lessening the power dissipation of the circuit for the magnitude of the driving current is lowered. It is possible to minimize the power dissipation from improving the driving technology. The classical technology, Row-to-Row driving, is that row is selected one by one while applying the column current input individually. The multi-line driving is a new technology which is to select multiple rows simultaneously while applying the column current as a whole. However, the solution of the multi-line driving is NP-complete problem. The efficiency is dependant on the sort of picture and the driving condition. This paper presents the new efficient multi-line driving which is that the multiple lines are selected by applying column current together after grouping the simultaneous driving group applying the gnew efficient muthe coi-line dr coefficient. Bengrouping the several rows which has the higher coi-line dr coefficient, the more efficient driving is realized to present the high quality image and to lessen the power dissipation and to stretch the life time in the PM OLED.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.4
• /
• pp.263-270
• /
• 2016

Background: In this study, microwave extraction was used, which is an effective method to extract useful bioactive substances as it requires low quantities of solvent and short time periods. The aim of this study was to determine the optimal extraction conditions for Agrimonia pilosa Ledeb. Methods and Results: The independent variables were ethanol concentration, microwave power, and extraction time, each of which had five levels. The dependent variables were total polyphenol and total flavonoid content, and DPPH radical scavenging activity. To determine the optimal extraction conditions for bioactive compounds, a response surface methodology was employed. Contour maps were generated from polynomial equations. The optimal conditions were then assumed by superimposing these contour maps. Based on the resulting graph, the optimal microwave extraction conditions for Agrimonia pilosa Ledeb were determined as 42 - 48% ethanol concentration, 240 - 280W microwave power, and 13 - 20 min of extraction time. Conclusions: Ethanol concentration had a significant effect on microwave extraction, in terms of total polyphenol and total flavonoid content, as well as DPPH radical scavenging activity. Microwave power and extraction time influenced the total polyphenol content, but not the total flavonoid content or the DPPH radical scavenging activity.

• Nuclear Engineering and Technology
• /
• v.47 no.2
• /
• pp.176-186
• /
• 2015

Pattern classifications have become important tools for fault diagnosis in nuclear power plants (NPP). However, it is often difficult to obtain training data under fault conditions to train a supervised classification model. By contrast, normal plant operating data can be easily made available through increased deployment of supervisory, control, and data acquisition systems. Such data can also be used to train classification models to improve the performance of fault diagnosis scheme. In this paper, a fault diagnosis scheme based on semisupervised classification (SSC) scheme is developed. In this scheme, new measurements collected from the plant are integrated with data observed under fault conditions to train the SSC models. The trained models are subsequently applied to new measurements for fault diagnosis. In comparison with supervised classifiers, the proposed scheme requires significantly fewer data collected under fault conditions to train the classifier. The developed scheme has been validated using different fault scenarios on a desktop NPP simulator as well as on a physical NPP simulator using a graph-based SSC algorithm. All the considered faults have been successfully diagnosed. The results have demonstrated that SSC is a promising tool for fault diagnosis in NPPs.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.532-538
• /
• 2018

This paper proposes an algorithm for signal processing which is used in pulse induction metal mine detectors. The detection power can be obtained from magnetic variation on the search coil. The calibration data should be made when there is no target because the detection power is difference between with and without a target. And it is also updated periodically because of surrounding various noises. Lastly, we keep a watch on the signal slope to identify exact position and signal power of mine detection.

• The Mathematical Education
• /
• v.41 no.1
• /
• pp.19-34
• /
• 2002

The 7th national mathematics curriculum lays emphasis on an interrelation of several subjects and a connection between mathematics and real life. In this reason, this study focuses on the enhancement of sound understanding nuclear energy which is one of important factor(concepts or contents) dealt with in the other subjects such as science, environment, social studies, etc.. Recently, even though it is insistent that nuclear energy be so important and request in the future society, there are still strong pro and cons regarding the use of it. In this study, teaching-and-learning materials were developed dealing with using nuclear energy, and consequently they might be used in math class for the purpose of enhancement of mathematical learning ability and of recognition on nuclear energy. In this study, Material 1 included a matter of the necessity for nuclear power plants using the ratio concept, and Material 2 did on a matter of the efficiency of nuclear energy and the unclear of nuclear power plants using ratio-graph, in the elementary and upper school mathematics. Material 3 focused on a matter of the principles of nuclear power plants using the properties of exponential law in high school mathematics. Ultimately, it is hoped in the study that more diverse instructional materials dealing with diverse situations inside and outside mathematics would be developed.

• Communications of the Korean Mathematical Society
• /
• v.36 no.2
• /
• pp.197-207
• /
• 2021

The main purpose of this paper is to study the zero-divisor properties of the zero-symmetric near-ring of skew formal power series R₀[[x; α]], where R is a symmetric, α-compatible and right Noetherian ring. It is shown that if R is reduced, then the set of all zero-divisor elements of R₀[[x; α]] forms an ideal of R₀[[x; α]] if and only if Z(R) is an ideal of R. Also, if R is a non-reduced ring and annR(a - b) ∩ Nil(R) ≠ 0 for each a, b ∈ Z(R), then Z(R₀[[x; α]]) is an ideal of R₀[[x; α]]. Moreover, if R is a non-reduced right Noetherian ring and Z(R₀[[x; α]]) forms an ideal, then ann_R(a - b) ∩ Nil(R) ≠ 0 for each a, b ∈ Z(R). Also, it is proved that the only possible diameters of the zero-divisor graph of R₀[[x; α]] is 2 and 3.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.41-49
• /
• 2010

Faloustsos et al.[1,2] showed successfully that the power-laws describe the heavy-tailed distributions of the AS level Internet topology properties such as node degree. This result allows us to represent the characteristics of AS-level Internet topology using some power-law exponents with elegant and simple. In this paper, we obtained the power-law exponents of the domestic AS-level Internet topology properties - the node degree, the number of pairs within hops, and eigenvalues of the graph - based on the valley-free BGP routing policy. We used the real data sets from UCLA IRL laboratory, and showed that these power-laws fit the real data pretty well resulting in correlation coefficient of 90.7%, 96.5%, and 97%, respectively. In particular, rounding the effective diameter to three, approximately 91% of the pairs of nodes are within this distance; that is, we might conclude our topology is pretty well organized.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.469-478
• /
• 2022

This paper contains the results of developing smart devices and applications to monitor the load power of the industrial manufacturing machine and evaluate its performance. The smart devices in this paper are divided into two functionalities, which are collecting load power along with operating environment data of industrial manufacturing machines and transmitting the data to servers. Load power data collected from the smart devices are uploaded to MariaDB inside the Amazon Web Service (AWS) server. Using the RESTFul API, the uploaded power data can be retrieved and shown on the web and mobile application in the form of a graph to provide monitoring capability. To evaluate the performance of the developed system, the response time from MariaDB to web and mobile applications was measured. The results is ranging from 0.0256 to 0.0545 seconds in a 4G (LTE) network environment and from 0.6126 to 1.2978 seconds in a 3G network environment, which is considered a satisfactory result.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.327-332
• /
• 2016

The routing protocol for low-power and lossy networks (RPL) is an internet protocol based routing protocol developed and standardized by IETF in 2012 to support a wide range of applications for low-power and lossy-networks (LLNs). In LLNs consisting of resource-constrained devices, the energy consumption of battery powered sensing devices during network operations can greatly impact network lifetime. In the case of inefficient route selection, the energy depletion from even a few nodes in the network can damage network integrity and reliability by creating holes in the network. In this paper, a composite energy-aware node metric ($RER_{BDI}$) is proposed for RPL; this metric uses both the residual energy ratio (RER) of the nodes and their battery discharge index. This composite metric helps avoid overburdening power depleted network nodes during packet routing from the source towards the destination oriented directed acyclic graph root node. Additionally, an objective function is defined for RPL, which combines the node metric $RER_{BDI}$ and the expected transmission count (ETX) link quality metric; this helps to improve the overall network packet delivery ratio. The COOJA simulator is used to evaluate the performance of the proposed scheme. The simulations show encouraging results for the proposed scheme in terms of network lifetime, packet delivery ratio and energy consumption, when compared to the most popular schemes for RPL like ETX, hop-count and RER.