• 제목/요약/키워드: Power feedback

검색결과 1,260건 처리시간 0.028초

광 귀환에 의한 erbium 첨가 광섬유 증폭기의 이득과 ASE 스펙트럼 안정화 (Gain and spectra stabilization in erbium-doped fiber amplifier with optical feedback)

  • 김호삼;박희갑
    • 한국광학회지
    • /
    • 제5권2호
    • /
    • pp.291-297
    • /
    • 1994
  • Erbium첨가 광섬유 증폭기에서 증폭된 자연방출광(ASE) 출력의 일부를 대역투과 파장 필터를 거쳐 입력단으로 루프 귀환시켜 광증폭기를 특정 파장에서 발진시킴으로써 신호광에 대한 증폭 이득을 일정치에 고정시켰다. 증폭 이득과 ASE 출력 스펙트럼은 광증폭기가 발진하는한 입력광 power나 펌프광 power의 변화에 대하여 무관하였으며 귀환 루프의 손실에만 의존하였다. 또한 광증폭기에 저속으로 변조된 대신호가 입사하는 경우에도 이득포화에 의한 파형 왜곡없이 증폭이 가능하였다.

  • PDF

Feedback linearization을 이용한 연속공정시스템에서 장력의 통특성 개선 (Improvement of tension dynamic characteristics in continuous process using Feedback linearization method)

  • 정경철;김장목;전석호;설승기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 추계학술대회 논문집 학회본부
    • /
    • pp.453-455
    • /
    • 1997
  • 일반적으로 제철공정에서 각 공정사이의 철판의 속도와 장력은 브라이드롤을 이용하여 제어하는데 여기서 입력 측의 브라이드롤은 장력을 제어하고 출력 측의 브라이드롤은 공정의 속도를 제어한다. 이와 같은 방법은 시스템 기동의 순간을 포함하여 공정속도의 변경이 있을 경우 제철 공정 상에서는 특히 철판의 높은 탄성에 기인하여 시스템이 상당히 불안정하게 된다. 본 논문에서는 각 전동기가 정해진 역할에 따라 독립적으로 장력 혹은 공정속도를 제어하고 장력의 모델링에서 비선형의 요소를 되먹임하여 원래의 시스템을 선형화시켰고 이때 미분관측기를 이용하였다. 이 제어기의 장점은 무엇보다도 독립적인 역할의 분담으로 인해 다수의 전동기로 확장이 용이하도록 하는 것이다.

  • PDF

An Alternative Zero Voltage Switching Method of Boost Rectifier in Power Factor Correction Rectifier/Regulator System using DC Linked Energy Feedback Circuit

  • Roh, Chung-Wook;Kim, Bok-Man;Moon, Gun-Woo;Youn, Myung-Joong
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
    • /
    • pp.270-275
    • /
    • 1998
  • A new single phase power factor correction rectifier/regulator with dc linked energy feedback circuit is proposed, which is capable of achieving the zero voltage switching (ZVS) of a boost rectifier stage without any auxiliary switch. The performance of the proposed rectifier/regulator is demonstrated through a 200W, 90 KHz prototype. This proposed rectifier/regulator with dc linked energy feedback circuit is particularly suited for distributed power system applications

  • PDF

3상 전력변환 시스템을 위한 다변수 상태궤환 제어 (Multivariable State Feedback Control for Three-Phase Power Conversion systems)

  • 이동춘;이지명
    • 전력전자학회논문지
    • /
    • 제2권1호
    • /
    • pp.1-11
    • /
    • 1997
  • 본 논문은 전력변환 시스템의 제어 특성 개선을 위해 전향제어를 갖는 다변수 상태궤환제어를 제시하였다. 이론의 적용대상은 3상 전압형 PWM 컨버터 및 인버터 그리고 3상 전류형 PWM 컨버터 및 인버터 시스템이며, 이들의 등가회로 및 모델링이 유도되고 해석되었다. 다양한 시뮬레이션에 의해 제시된 방법의 타당성을 검증하였다.

  • PDF

Active Damping Method Using Grid-Side Current Feedback for Active Power Filters with LCL Filters

  • Tang, Shiying;Peng, Li;Kang, Yong
    • Journal of Power Electronics
    • /
    • 제11권3호
    • /
    • pp.311-318
    • /
    • 2011
  • LCL filters installed at converter outputs offer a higher harmonic attenuation than L filters. However, as a three order resonant circuit, it is difficult to stabilize and has a risk of oscillating with the power grid. Therefore, careful design is required to damp LCL resonance. Compared to a passive damping method, an active damping method is a more attractive solution for this problem, since it avoids extra power losses. In this paper, the damping capabilities of capacitor current, capacitor voltage, and grid-side current feedback methods, are analyzed under the discrete-time state-space model. Theoretical analysis shows that the grid-side current feedback method is more suitable for use in active power filters, because it can damp LCL resonance more effectively than the other two methods when the ratio of the resonance and the control frequency is between 0.225 and 0.325. Furthermore, since there is no need for extra sensors for additional states measurements, this method provides a cost-efficient solution. To support the theoretical analysis, the proposed method is tested on a 7-kVA single-phase shunt active power filter.

An Improved Active Damping Method with Capacitor Current Feedback

  • Geng, Yi-Wen;Qi, Ya-Wen;Liu, Hai-Wei;Guo, Fei;Zheng, Peng-Fei;Li, Yong-Gang;Dong, Wen-Ming
    • Journal of Power Electronics
    • /
    • 제18권2호
    • /
    • pp.511-521
    • /
    • 2018
  • Proportional capacitor current feedback active damping (CCFAD) has a limited valid damping region in the discrete time domain as (0, $f_s/6$. However, the resonance frequency ($f_r$) of an LCL-type filter is usually designed to be less than half the sampling frequency ($f_s$) with the symmetry regular sampling method. Therefore, ($f_s/6$, $f_s/2$) becomes an invalid damping region. This paper proposes an improved CCFAD method to extend the valid damping region from (0, $f_s/6$ to (0, $f_s/2$), which covers all of the possible resonance frequencies in the design procedure. The full-valid damping region is obtained and the stability margin of the system is analyzed in the discrete time domain with the Nyquist criterion. Results show that the system can operate stably with the proposed CCFAD method when the resonance frequency is in the region (0, $f_s/2$). The performances at the steady and dynamic state are enhanced by the selected feedback coefficient H and controller gain $K_p$. Finally, the feasibility and effectiveness of the proposed CCFAD method are verified by simulation and experimental results.

주기적 정성적분석을 통한 훈련목표 제공이 남자 역도 인상기술 향상에 미치는 영향 (The Effect of snatch technique improvement for men weightlifter of feedback support through quantity analysis by periods)

  • 문영진;류중현;이순호
    • 한국운동역학회지
    • /
    • 제14권2호
    • /
    • pp.69-83
    • /
    • 2004
  • The purpose of this study is searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system. Moreover, It is also analysis the repeating the establishment of exercise purpose and studying for the effect of the field adaptation. The subject of this study was five male weight lifting players who have been engaged in Korean Delegation Team. The institution of exercise target was made through two times qualitative analysis and the result of studying for the effect of the field adaptation was produced before offering feedback. Moreover, two time analysis added after offering feedback. All analysis was based on 2-D visual analysis. The results of this study are as follows: 1. Maximal barbell moving speed in starting phase was decreased after offering feedback. This result implies advancement of technical skills after offering feedback. 2. From starting posture to 앉아받기, forward and backward moving distance of hip joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 3. In terms of pull phase, forward and backward moving distance of hip and shoulder joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 4. In terms of pull phase, the difference of horizontal value of coordinates was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 5. In terms of pull phase, the motion range of hip joint was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them were not variable or narrow decreasing. This result represents that feedback system could not brought tremendous effects. 6. From apex point of barbell to 앉아받기, the difference of barbell height was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them weren't variable or narrow increasing. This result represents that feedback system could not brought tremendous effects. 7. In terms of last-pull phase, the angular velocity of knee joint was increased after offering feedback in four of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them, only one subject, decreased. This result represents that feedback system could not brought tremendous effects. 8. In terms of last-pull, the conversional tendency of maximal extension to flextion came out all but simultaneously without offering feedback in four of five subjects. This is well-performed technique. Only one subject, however, could not use power effectively because the fact that his maximal extension came out in serial, from ankle to knee and waist means dispersion of power. In addition to, after offering feedback, only one subject made increasing the maximal extension of knee in last-pull and this result represents advancement of skills after offering feedback. However, the rest of them could not make meaningful development after offering feedback. 9. It might be assumed that searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system could improve player's skill.

Power-Scalable, Sub-Nanosecond Mode-Locked Erbium-Doped Fiber Laser Based on a Frequency-Shifted-Feedback Ring Cavity Incorporating a Narrow Bandpass Filter

  • Vazquez-Zuniga, Luis Alonso;Jeong, Yoonchan
    • Journal of the Optical Society of Korea
    • /
    • 제17권2호
    • /
    • pp.177-181
    • /
    • 2013
  • We present an all-fiberized power-scalable, sub-nanosecond mode-locked laser based on a frequency-shifted-feedback ring cavity comprised of an erbium-doped fiber, a downshifting acousto-optic modulator (AOM), and a bandpass filter (BPF). With the aid of the frequency-shifted feedback mechanism provided by the AOM and the narrow filter bandwidth of 0.45 nm, we generate self-starting, mode-locked optical pulses with a spectral bandwidth of ~0.098 nm and a pulsewidth of 432 to 536 ps. In particular, the output power is readily scalable with pump power while keeping the temporal shape and spectral bandwidth. This is obtained via the consolidation of bound pulse modes circulating at the fundamental repetition rate of the cavity. In fact, the consolidated pulses form a single-entity envelope of asymmetric Gaussian shape where no discrete internal pulses are perceived. This result highlights that the inclusion of the narrow BPF into the cavity is crucial to achieving the consolidated pulses.

엘리베이터를 위한 유도전동기의 에너지절감 및 고성능제어 (Control of Elevator Induction Motors with High Dynamic Performance and High Power Efficiency)

  • 김규식;김재윤;최주엽;송중호
    • 전력전자학회논문지
    • /
    • 제4권1호
    • /
    • pp.43-49
    • /
    • 1999
  • 본 연구에서는 비선형 시스템을 선형 시스템으로 변환시키는 미분기하이론에 기초를 둔 비선형 궤환 선형화 기법을 유도전동기와 같은 비선형 시스템의 제어에 응용함으로써 완전한 비간섭 시스템을 얻을수 있음을 보였다. 또한, 엘리베이터와 같은 부하의 정속도 운전시 효율제어를 위해 회전자 자속을 변화시킬 때 이의 영향을 받아 값이 바뀌는 인덕턴스와 온도에 따라 가장 변화가 심한 회전자저항을 위한 추정알고리즘을 제안하고 이의 성능을 평가해 보기 위하여 시뮬레이션과 실험을 수행하였다.

Digital State Feedback Current Control using the Pole Placement Technique

  • Bae, Hyun-Su;Yang, Jeong-Hwan;Lee, Jae-Ho;Cho, Bo-Hyung
    • Journal of Power Electronics
    • /
    • 제7권3호
    • /
    • pp.213-221
    • /
    • 2007
  • A digital state feedback control method for the current mode control of DC-DC converters is proposed in this paper. This approach can precisely achieve interleaved current sharing among the converter modules. As the controller design and system analysis are performed in the time domain, the proposed method can easily satisfy the required converter specification by using the pole placement technique. The digital state feedback controller in the continuous and discrete time domain is derived for the robust tracking control. For the verification of the proposed control scheme, a parallel module bi-directional converter in a prototype 42V/14V hybrid automotive power system, which is a design example in the continuous time domain, and a parallel module buck converter, which is a design example in the discrete time domain, are implemented using a TMS320F2812 digital signal processor (DSP).