• 조명전기설비학회논문지
• /
• 제26권11호
• /
• pp.104-108
• /
• 2012

Flexible organic thin film solar cell device with Bulk Hetero-Junction (BHJ) structure was fabricated with blended conjugated polymer of PCDTBT : $PC_{71}BM$ as active layer. Surface of ITO anode for the organic solar cell device was treated with ozone. The organic solar cell device with bare ITO showed short circuit current density ($J_{sc}$) of $8.2mA/cm^2$, open-circuit voltage ($V_{oc}$) of 0.73V, fill factor (FF) of 0.36, and power conversion efficiency (PCE) of 2.16%, respectively. The organic solar cell device with ozone treated ITO anode revealed distinctively improved performance parameters:$J_{sc}$ of $9.8mA/cm^2$, $V_{oc}$ of 0.82V, FF of 0.43, PCE(${\eta}$) of 3.42%.

• 대한전기학회논문지
• /
• 제36권12호
• /
• pp.874-887
• /
• 1987

The efficiency of a synchronous motor can be substantially improved by controlling armature voltage, field excitation, and load angle on optimum values which yield minimum input power at any specified torque and speed. This improvement is particularly noticeable in the case of light loads. In addition, the control of armature input voltage improves the power factor at which the motor operates. Employed in the analysis is a new equivalent circuit model of the motor which incorporates the frequency dependent nature of the motor parameters and the effects of iron loss. The stability of synchronous motor operation is studied by applying the Nyquist stability criterion to the linearized equations which describe the behavior of the motor as the motor loads perturb about a steady-state operating point. This investigation reveals that, in some cases, the stable region of the motor is delineated from the results of a computer simulation. With a view to reducing harmonic loss and improving torque pulsation from harmonic components, a very poweful pulse amplitude modulation (PAM) method using an 16-bit microcomputer has been developed. This method has the advantages of simplicity of control algorithms and requires small memory space for storing thyristor trigger angles for a three-phase PAM inverter. The method can be used for smooth control of both modulation depth and frequency over a wide range.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.66-72
• /
• 2007

This study proposed new method to decide the reference model necessary for design PID controller. In generally, control design problems using the reference model have the following two factors. One factor is that numerical model of the controlled system can be obtained extremely, and the other is that specification for the closed-loop dynamic performance is pure moderate. Therefore, the control design procedure is essentially based on the partial reference model matching which offers a reasonable method to simplify the design and the controller configuration under the controlled system uncertainty. ITAE(Integral of time-multiplied absolute error) performance index and Kitamori method etc. which were used a reference model method had a limit to settling time and rising time of reference model that it arrived to steady state response according to the controlled system. On this study, if it only knew peak time of overshoot and settling time by measurement signal of the controlled system, it can be made the reference model easily. We proposed new method to improve performance index of the reference model superior to existing reference model index and illustrate the numerical simulation results to show the effectiveness of proposed control method design.

• 한국조명전기설비학회지:조명전기설비
• /
• 제10권5호
• /
• pp.75-82
• /
• 1996

전지전력저장시스템(BESS)은 날로 심화되어 가는 부화율의 하락현상을 보완해 줄 수 있으며, 순동예비력, 전압 및 주파수제어, 발전 및 송배전 설비의 투자지연 효과, 공급신뢰도 향상 등의 효과를 가지고 있다. 이러한 BESS를 개발완료하여 실용화하기 위해서 경제성 평가가 수반되어야 한다. 본 연구에서는 Sysplan Model을 국내 실정에 맞게 수정 보완하여 경제성 평가를 통한 투자가치를 분석하였다.

• Journal of Biosystems Engineering
• /
• 제6권1호
• /
• pp.48-59
• /
• 1981

The major limiting factor on the determination of combine capacity is the frequent occurence of clogging over the some parts of machine when the crop is wet in the case of Japanese self-feeding type combine. And in the case of American conventional combine having big separating parts, the great grain loss and damage occur when the machine is used for rice harvesting. This experiment was carried out to develop the new type threshing and separating equipment. Proto-type thresher which consist of a conical threshing drum and a conical separating sieve rotating around the threshing cone was constructed and tested. In the case of 800 rpm of threshing cone speed, average threshing loss was below 1 percent, separating loss was about 1 percent, grain damage was about 0.4 percent, and average total power required was about 2.6 PS. This design has some problems such as higher power required or wrapping problems under the conditions of feeding long damp straw. But, compared with the conventional combine or thresher, this machine certainly has some potentials for this approach to combine development. The crop feed rate must be increased through improvement of the feeding portion of the threshing cone. And it is required to investigate further about some parameters causing wrapping phenomena.

• 대한금속재료학회지
• /
• 제47권12호
• /
• pp.866-872
• /
• 2009

The effects of magnetic powder thickness on electromagnetic wave absorption characteristics in Fe-6.5Si-0.9Cr (wt%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The atomized FeSiCr powders were milled by using attritor for 12, 24, and 36 h, powder thickness changed from $40{\mu}m$ to $3{\mu}m$ upon 36 h milling. The composite sheet, including thinned magnetic flakes, exhibited higher power loss in the GHz frequency range as compared with the sheets having thick flakes. Moreover, both the complex permeability and the loss factor increased with the decrease in thickness of the alloy flakes. Therefore, the enhanced power loss property of the sheets containing thin alloy flakes was attributed to the flakes of high complex permeability, especially their imaginary part. Additionally, the complex permittivity was also increased with the reduction of flake thickness, and this behavior was considered to be helpful for improvement of the electromagnetic wave absorption characteristics in the composite sheets, including thin alloy flakes.

• Asian Journal of Atmospheric Environment
• /
• 제4권3호
• /
• pp.150-156
• /
• 2010

Inter-comparison of chemical transport models (CTMs) was conducted among four modeling research groups. Model performance of the ensemble approach to $O_3$ and $PM_{2.5}$ simulation was evaluated by using observational data with a time resolution of 1 or 6 hours at four sites in the Kanto area, Japan, in summer 2007. All groups applied the Community Multiscale Air Quality model. The ensemble average of the four CTMs reproduced well the temporal variation of $O_3$ (r=0.65-0.85) and the daily maximum $O_3$ concentration within a factor of 1.3. By contrast, it underestimated $PM_{2.5}$ concentrations by a factor of 1.4-2, and did not reproduce the $PM_{2.5}$ temporal variation at two suburban sites (r=~0.2). The ensemble average improved the simulation of ${SO_4}^{2-}$, ${NO_3}^-$, and ${NH_4}^+$, whose production pathways are well known. In particular, the ensemble approach effectively simulated ${NO_3}^-$, despite the large variability among CTMs (up to a factor of 10). However, the ensemble average did not improve the simulation of organic aerosols (OAs), underestimating their concentrations by a factor of 5. The contribution of OAs to $PM_{2.5}$ (36-39%) was large, so improvement of the OA simulation model is essential to improve the $PM_{2.5}$ simulation.

• 방사성폐기물학회지
• /
• 제2권1호
• /
• pp.35-40
• /
• 2004

Final disposal of radioactive waste generated from Nuclear Power Plant (NPP) requires the detailed information about the characteristics and the quantities of radionuclides in waste package. Most of these radionuclides are difficult to measure and expensive to assay. Thus it is suggested to the indirect method by which the concentration of the Difficult-to-Measure (DTM) nuclide is estimated using the correlations of concentration - it is called the scaling factor - between Easy-to-Measure (Key) nuclides and DTM nuclides with the measured concentration of the Key nuclide. In general, the scaling factor is determined by the log mean average (LMA) method and the regression method. However, these methods are inadequate to apply to fission product nuclides and some activation product nuclides such as 14$^{C}$ and 90$^{Sr}$ . In this study, the artificial neural network (ANN) method is suggested to improve the conventional SF determination methods - the LMA method and the regression method. The root mean squared errors (RMSE) of the ANN models are compared with those of the conventional SF determination models for 14$^{C}$ and 90$^{Sr}$ in two parts divided by a training part and a validation part. The SF determination models are arranged in the order of RMSEs as the following order: ANN model

• Fisheries and Aquatic Sciences
• /
• 제27권6호
• /
• pp.356-365
• /
• 2024

The study was conducted in the Terie River between January and April 2022. The objectives of the study were to assess the fish species composition, determine the length-weight relationship and condition factor and assess the water quality of the river using international water quality guideline for aquatic life. Gillnets with different mesh sizes, 4, 6, 8 and 10 cm were used to collect fish specimens in both dry and wet seasons. Immediately after capture, the total length (TL) and total weight (TW) of each individual were measured in centimeters and grams, respectively, and their relationship was determined using the power function. The physicochemical water quality parameters were analyzed using standard procedures and wagtech portable water quality Kits and Secchi Disk apparatus. A total of 667 fish specimens were collected from the Terie River, 410 and 257 in dry and wet seasons respectively. A total of six fish species, Oreochromis niloticus, Labeobarbus intermedius, Labeobarbus nedgia, Labeobarbus beso, Clarias gariepinus, and Ramius loti were recorded. For length-weight relationship and condition factor analysis, more abundant fish species (O. niloticus and L. intermedius) which were found in both seasons were selected. The length and weight relationship of L. intermedius were TW = 0.0073TL^3.04 in dry and TW = 0.0337TL^2.59 in we season indicated isometric and negative allometric growth respectively. While O. niloticus showed negative allometric growth, TW = 0.096TL^2.44 and TW = 0.0335 TL^2.76 in dry and wet seasons, respectively. The mean Fulton condition factor (FCF) of L. intermidus were 0.85 ± 0.03 and 0.94 ± 0.25 in dry and wet seasons, respectively. The FCF of O. niloticus was 1.70 ± 0.13 and 1.73 ± 0.12 in dry and wet seasons respectively. Except for ammonia, the physicochemical water quality parameters were with the permissible limit for aquatic life and are suitable for fishes Terie River. The river has commercially important fish specimens that could be used for food security and livelihood improvement. However, there is very limited fishing activity in the river due to less awareness on the value of fishes. Therefore, sustainable fishery development should be done in the river.

• 한국전자파학회논문지
• /
• 제16권10호
• /
• pp.1028-1035
• /
• 2005

OFDM(Orthogonal Frequency Division Multiplexing)은 많은 통신 시스템에서 사용되고 있다. 기존 SPW 방법에서 반복처리로 인한 시간 소요를 단축하기 위하여 계산량 감소를 위한 phase weighting의 계산량 감소 방법을 제안한다. 낮은 복잡도의 phase weighting으로 OFDM 신호의 PAPR(Peak-to-Average-Power Ratio)을 줄이는 방법은 주기적인 sequence들의 DFT(Discrete Fourier Transform)의 성질을 이용한다. PAPR은 적은 계산량을 갖는 phase weighting 방법에 의해 능률적으로 줄일 수 있다. 시뮬레이션 결과, 기존 방식들과 비슷한 PAPR 저감 효과를 갖는다는 것을 보여준다. 제안한 기술은 두 개의 phase factor로 PAPR을 2.15 dB 줄일 수 있고 4개의 phase factor들로 PAPR을 3.95 dB 줄일 수 있다. 계산량 분석에서 phase weighting 방법이 계산량을 매우 감소시킨다.