• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 전기설비
• /
• pp.9-10
• /
• 2006

가공배전선로는 태풍 내습시 전주 및 전선에 작용하는 풍압에 대하여 견딜 수 있도록 설계되어져야 한다. 따라서 본 연구에서는 가공배전선로의 설계시 사용되는 전주에 가해지는 풍압에 의한 굽힘모멘트 및 굴곡개소의 합성모멘트 계산시 사용하는 기존 계산식의 문제점을 분석하고 현장에서 쉽게 적용 가능한 새로운 계산식을 유도하였다. 새로운 계산식을 이용하여 설계자들이 가공배전선로의 지지물 및 지선강도를 검토할 수 있게 됨으로써 태풍과 같은 재해시에도 안전한 설비를 시설할 수 있게 되었다.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권1호
• /
• pp.9-12
• /
• 2018

최근 도시미관과 편리성을 위해 지중송전선로의 사용이 확대되고 있다. 하지만 지중송전선로에서 발생하는 손실, 특히 24시간 상시 운영되는 3상 케이블을 지지하고 있는 금구류에서 발생하는 손실에 관한 연구는 부족하다. 케이블지지 금구류는 도전율과 투자율을 가지는 재질로 구성되어지기 때문에 케이블에 흐르는 전류에 의한 자기장 때문에 와전류 및 히스테리시스 손실이 발생하게 된다. 이 때 발생하는 손실은 전력 에너지 전달 효율에 악영향을 미치기 때문에 손실에 대한 연구가 필요하다. 따라서 본 논문에서는 3차원 유한요소해석을 통하여 케이블의 주변 금구류에서 발생하는 와전류 및 히스테리시스 손실에 대하여 분석하였다.

• 응용통계연구
• /
• 제33권5호
• /
• pp.541-553
• /
• 2020

Receiver operating characteristic (ROC) 곡선은 민감도와 특이도로 표현되며, ROC 곡선을 이용하는 최적분류점도 민감도와 특이도만을 반영하지만, 본 연구에서는 질병률과 효용을 추가하여 고려하는 기대효용함수를 연구한다. 특히 교차하는 ROC 곡선들의 area under the ROC curve (AUC) 값들이 유사한 경우에 특정한 부분의 부분 AUC를 비교해야 한다. 본 연구에서는 정의된 민감도 직선과 특이도 직선을 바탕으로 각각 높은 민감도와 특이도를 나타내는 부분 AUC를 제안한다. ROC 곡선들이 교차하고 동일한 AUC 값을 갖는 다양한 분포함수를 설정하여, 민감도 직선과 특이도 직선을 이용하여 구한 부분 AUC를 비교하면서 모형의 판별력을 향상시키는 방법을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.614-615
• /
• 2007

There are roughly a hundred types of cables in power plants. The distribution of circuits in a nuclear plant is comprised of 20% instrument cables, 61% control cables, 13% AC power cables, 1% DC power cables, and 5% communication lines. In the nuclear power plant, medium voltage cables are generally included in the scope of systems reviewed for safety and are included in a plant's maintenance program. Medium voltage cables provide power to many critical components in plants, including feed water pumps, circulating water pumps, and condensate pumps. Among these cables, high temperature sections of cables feeding electrical power to the circulating water pump and the condenser extraction pump were found. The evaluation for these cables is performed to find the maximum allowable current and temperature. The result shows that the load current flowed about 85% of the allowable current ampacity, and the temperature of conductor at full load current did not exceed the limited temperature. Therefore, existing cables for circulating water pump and condenser extraction pump system are going to be used during design life.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1663-1665
• /
• 1998

The power distribution system is 22.9 kV-y neutral point multi-ground one in our country. So, if conducting materials contacted, to the power line electrical equipment faults or stoppage of electrical power supply happened in the line. contacts are caused by magpie or its nest materials, especially, electrical power incidents by magpie from February to May, season layed egg, is high as 30% as. It is important to electrical power supplier to protect electrical power equipment caused by magpie. From now, KEPCO have tried to protect electrical power equipment faults caused by magpie using several methods, but have not acquired good results and continued to withdraw the nest. Recently, nature environment protection expand to around country and KEPCO also changed the nest withdrawal method to new pre-protection method coexisted with magpie, "Environmental Affinitive Pre-protection Counterplan". Therefore, we planned environmental affinitive pre-protection equipment, set test line. Also, after analyzed its effects during 1 year, we satisfied with results, and then expanded to other test lines and regions.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1163-1175
• /
• 2016

In recent years, microgrids have been the focus of considerable attention in distributed energy distribution. Microgrids contain a large number of power electronic devices that can potentially cause negative impedance instability. Harmonic impedance is an important tool to analyze stability and power quality of microgrids. Harmonic impedance can also be used in harmonic source localization. Precise measurement of microgrid impedance and analysis of system stability with impedances are essential to increase stability. In this study, we introduce a new square wave current injection method for impedance measurement and stability analysis. First, three stability criteria based on impedance parameters are presented. Then, we present a new impedance measurement method for microgrids based on square wave current injection. By injecting an unbalanced line-to-line current between two lines of the AC system, the method determines all impedance information in the traditional synchronous reference frame d-q model. Finally, the microgrid impedances of each part and the overall microgrid are calculated to verify the measurement results. In the experiments, a simulation model of a three-phase AC microgrid is developed using PSCAD, and the AC system harmonic impedance measuring device is developed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.169-170
• /
• 2008

최근 전력수요의 증가 및 부하 고밀도화에 효과적으로 대응하고 배전설비 투자비용의 절감을 통한 경영효율성 증진을 위해 전배전선로를 대상으로 배전선로의 상시운전용량과 비상시운전용량을 상향조정하였다. 도심번화가 공단 등 부하밀집지역, 선로전압 유지곤란지역 및 경과지 확보가 곤란한 지역에 대용량 배전방식을 채택하여 운영하고 있다. 이와 같은 배전계통 운전 용량의 큰 변화에 따라 전력회사에서는 일선사업소의 모든 배전계획자들이 배전계획 및 운영시 배전계통의 설비를 가장 효율적으로 이용할 수 있도록 모든 배전선로에 대하여 배전용변전소, 주변압기, 인접 2회선 등의 상정사고 및 작업시에도 건전정전구간이 발생하지 않도록 부하를 융통할 수 있는 연계 기준이 마련되어 있다. 본 논문에서는 배전선로의 루프운전의 조건가능 여부를 보다 정확하고 신속한 방법으로 사전에 검토하여 고장을 예방하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.71-74
• /
• 1991

This paper is described an expert system which performs the network reconfiguration in order to operate distribution systems optimally using heuristic rules. The proposed network reconfiguration is able to not only eliminate abnormal states such as overload of transformers/lines and low voltage violation, but also achieve minimum power loss and optimum load balancing under normal states. In order to apply the network reconfiguration efficiently, an expert system is adopted a best-first tree searching strategy on the basis of heuristics, and is implemented in AI language Turbo PROLOG. Several examples are used to illustrate concepts described above.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.502-507
• /
• 1999

An improved, accurate and reliable high-voltage measuring system utilizing a bushing-type capacitor is proposed in this study. This system measures voltages and phase angles of three-phase 22.9 kV power distribution lines and provides enough current to charge a battery for a motor-driven load switch and to operate the measuring and communication circuits for the distribution automation. For reliability, epoxy resin was used as the dielectric material of the bushing-type capacitor since the dielectric strength of epoxy resin is very stable over the wide range of temperature. Capacitances were investigated and found to be stable over the wide range of temperature and applied voltage, and the results indicate that the proposed measurement system is very reliable.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.546-549
• /
• 2004

This paper describes the electrical characteristics of the polymer lightning arresters(L.As) used to protect distribution lines and power facilities from surge. For the relative comparison, the characteristics assessment was done for 2 states of L.As before and after water immersion treatment. The L.As for the comparative test were immersed with water of $95[^{\circ}C]$ considered a severe condition. After the immersion treatment, the assessment was carried out for material analyses in chemical structure(FTIR : fourier transform infrared spectrophotometer). Electrical performance measured insulation resistance measurement, leakage current measurement, critical operation voltage measurement etc.. In addition to, the results were compared with those for the L.As deteriorated in the field. Thus, the accelerative deterioration degree of polymer materials by immersion treatment was evaluated, by which the structural defects of the polymer L.As could be inferred.