• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1321-1329
• /
• 2016

To get an insight into the operating characteristics of the passive residual heat removal system of molten salt reactors, a two-phase natural circulation test facility was constructed. The system consists of a boiling loop absorbing the heat from the drain tank, a condensing loop consuming the heat, and a steam drum. A steady-state experiment was carried out, in which the thimble temperature ranged from $450^{\circ}C$ to $700^{\circ}C$ and the system pressure was controlled at levels below 150 kPa. When reaching a steady state, the system was operated under saturated conditions. Some important parameters, including heat power, system resistance, and water level in the steam drum and water tank were investigated. The experimental results showed that the natural circulation system is feasible in removing the decay heat, even though some fluctuations may occur in the operation. The uneven temperature distribution in the water tank may be inevitable because convection occurs on the outside of the condensing tube besides boiling with decreasing the decay power. The instabilities in the natural circulation loop are sensitive to heat flux and system resistance rather than the water level in the steam drum and water tank. RELAP5 code shows reasonable results compared with experimental data.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.1
• /
• pp.47-55
• /
• 2013

In the present study, a numerical simulation to analyze mixing performance inside an industrial mixer was investigated for various geometry of turbine impellers. Various pitching angles and various types of turbine blades were considered in the simulation. In order to model the rotation of impeller, the Multiple Reference Frames (MRF) technique was used. For evaluation of the effect of various shapes on the mixing performance, dimensionless coefficient such as flow coefficient, circulation coefficient, power coefficient, pumping effectiveness and circulation effectiveness were used. From the results, the effect of pitching angle of a pitched turbine impeller was to give best pumping effectiveness around $30^{\circ}$ pitching angle, whereas best circulation effectiveness around $65^{\circ}$ pitching angle. Dual pitched turbine impeller showed best performance in both pumping effectiveness and circulation effectiveness among impeller types considered in the present study.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.91-105
• /
• 2008

Nowadays, circulation industry is taking charge of important role in improvement of competitive power on the manufacturing industry and public welfare increase of consumer, price stabilization, employment creation and so on. A lot of research have been progressing for formation of total circulation complex, but decision making for selection of location on some facility is only calculated the optimum value when correct data values are inserted. However, a lot of decision making is accomplished in situation that have little knowledge of objective and constraints and as real world is also evaluated inclusive of analyst's subjectivity about variable, indefinite and fuzzy part, so it is decreasing a reliability on evaluation result and complicating objective evaluation on various effect and negative impact. Accordingly, from under like this situation, this study is to develop location decision model of circulation complex using fuzzy theory from the intention for the most reasonable decision making in fuzzy situation based on decision making problem on conventional location and size decision that did to be satisfactory constraints necessarily.

• Korean Journal of Organic Agriculture
• /
• v.17 no.3
• /
• pp.307-326
• /
• 2009

The present study suggests a concept of resources circulation type agriculture and a concept of a livestock zone related to it and evaluated economical efficiency about a possibility of the resources circulation type livestock zone based on the concept. As a result, when the resources circulation type livestock zone is operated in an area of 1,300ha, it was evaluated that the profit of 11,244 hundred thousand won per year is generated, compared to the conventional agriculture. When light and heat expenses and roughage of Hanwoo production, production of TMR forage as well as income of the energy and composting business of livestock manure at the recycling center were considered in addition to that, it was judged that the present zone development bushiness has enough business feasibility. However, it is necessary that the support regulations, etc. is constructed so that all produced compost byproducts are used at farmhouses and the system related to facility investment assurance and assistance of operating expenses is maintained. It is thought that the complement of a system is also necessary so that energy or power generation expenses can be operated in the same conditions as other new & renewable energy, and the nation's purchase of carbon credits(CDM) is investigated and systemized in the early period, and construction of a revitalization plan of the business through budget securing of the Ministry of Agriculture and Forestry related to the trade of CDM and carbon emission rights is also a business that should be urgently developed. In the future, the change of an outside environment will further promote use of the energy. Also, as people, who don't know agriculture. farm village, increase day by day because of population concentration in a city, an opportunity that can new added value through experience tourism or educational programs utilizing them is increasing. Accordingly, if programs utilizing social characteristics, such as utilization as a space of tourism. leisure. experience, system construction of bio-energy and system construction that Micro Grid or Smart Grid as a dispersed storage and generation system is stabilized, are constructed, it can be said that revitalization or success conditions of the zone is further achieved.

• Journal of Hydrogen and New Energy
• /
• v.29 no.6
• /
• pp.635-641
• /
• 2018

To select the operating condition of 0.5 MWth chemical looping combustion system, minimum fluidization velocity, transition velocity to fast fluidization and solid circulation rate were measured using mass produced new oxygen carrier (N016-R4) which produced by spray drying method for 0.5 MWth chemical looping combustion system. A minimum fluidization velocity decreased as the pressure increased. The measured transition velocity to fast fluidization was 2.0 m/s at ambient temperature and pressure. The measured solid circulation rate increased as the solid control valve opening increased. We could control the solid circulation rate from 26 to $93kg/m^2s$. Based on the measured minimum fluidization velocity and transition velocity to fast fluidization, we choose appropriate operating conditions and demonstrated continuous solid circulation at high pressure condition (5 bar-abs) up to 24 hours.

• Journal of Power System Engineering
• /
• v.16 no.4
• /
• pp.24-29
• /
• 2012

The numerical analysis by using CFX 11.0 commercial code was done for prediction of fluid flow and thermal field in the vertical heat exchanger. The present experimental studies were also conducted to investigate the effects of circulating solid particles on the fluid flow and temperatures in the fluidized bed vertical shell and tube type heat exchanger with counterflow, at which the solid particles of glasses (3 $mm{\Phi}$) were used in the fluidized bed with a smooth tube. The effect of circulation on the distance(L) of tube inlet and baffle plate was also examined. The present experimental and numerical results showed that the particles in the distance (Ds) of 15 mm showed a more efficient circulation without stacked the space and the LMTD(Log Mean Temperature Difference) in the fluidized bed type was much lower than that in the typical type shell and tube heat exchanger.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.867-876
• /
• 2022

An experimental study has been conducted to investigate the heat transfer characteristics of supercritical carbon dioxide (sCO₂) uniformly heated in the horizontal circular smooth tube. The results illustrated that there was a significant difference in heat transfer between the top wall and bottom wall due to the buoyancy. Bulk flow acceleration cannot be negligible in the high heat flux region, which leads to heat transfer deterioration. A new heat transfer correlation is proposed, in which the buoyancy parameter and bulk flow acceleration have been taken into account. The new correlation and six classic correlations for sCO₂ are examined in horizontal tubes. The comparison indicates that the new correlation has a better performance for sCO₂ flowing through a horizontal heating tube under natural circulation conditions. For example, 94.9% of the calculated results using the new heat transfer correlation were within ±30% of the experimental results while only 87.9% of that using the Jackson correlation (the best of the six) were within the same error bands.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1668-1673
• /
• 2011

Recent power industries are to be progressed as moving into horizontal markets and expanding of competitive systems through promoting SmartGrid. In these environments, the information on power consumers leads to establish a part of power markets through active and real-time participations instead of participating it as a passive manner presented by a vertical integration. Also, such information should be established as a way that effectively reflects changes and market behaviors occurred in power market participants. Therefore, in this study, a method that develops consumer information models, performs integrated managements, implements registration and distribution, and forms integrated management centers is presented to commonly use the consumer information according to the change in the environment of power industries.

• Journal of the Korean Institute of Rural Architecture
• /
• v.19 no.4
• /
• pp.49-56
• /
• 2017

Each country in the world currently concentrates on shifting into clean energy, which can be alternative energy, for global environment protection and solution to the problem of fossil fuel depletion. The Korean government is predicted to develop renewable energy, such as solar power, ground power, and offshore wind power, and to increase their supply ratios by ending the use of coals and nuclear power plants. This study conducted experiments on thermal storage performance of Trombe wall thermal storage materials using solar power and simulations in order to offer baseline data for the development of a hybrid air circulation system for heating that can maximize efficiency by simultaneously using solar and geothermal power. The study results are as follows: (1) In all the specimens with 3m, 5m, and 7m in the length of thermal storage pipe, $5.7^{\circ}C$, $7.8^{\circ}C$, and $10.5^{\circ}C$ rose, respectively, as the thermal storage effect of the specimens attaching insulation film and black tape to the general funnel. They were most excellent in terms of thermal storage effect. (2) As a result of thermal performance evaluation on the II type specimens, II-3 ($7.8^{\circ}C$ rise) > II-4 ($5.3^{\circ}C$ rise) > II-1 ($3.9^{\circ}C$ rise) > II-2 ($2.3^{\circ}C$ rise) was revealed, and thus II-3 (insulation film + black tape) was most effective as shown in the I type. (3) This study analyzed air current and temperature distribution inside of the greenhouse by linking actually measured values and simulation interpretation results through the interpretation of CFD (computational fluid dynamics). As a result, the parts absorbing heat and discharging heat around the thermal storage pipe could be visibly classified, and temperature distribution inside of the greenhouse around the thermal storage pipe could be figured out.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.230-234
• /
• 1995

The loss of offsite power test was successfully performed on YGN 4 to demonstrate that the reactor can be shutdown and the RCS can be maintained in a hot standby condition following a loss of all offsite Alternating Current (AC) power. Following the loss of main generator and all offsite AC power, the ensile emergency diesel generators were automatically started and the plant was stabilized via natural circulation. Plant conditions were maintained in hot standby for at least 30 minutes before offsite power was restored. Thus, the capability of equipment, controls and instrumentation necessary to remove decay heat from the core using only ensile emergency power was demonstrated, thereby satisfying all objectives and acceptance criteria of the test.