• 대한전자공학회논문지TC
• /
• 제49권8호
• /
• pp.46-51
• /
• 2012

본 논문에서는 무선 인지 중계 네트워크에서의 파워 할당 기법에 대해서 연구한다. 무선 인지 중계 네트워크는 주파수 공유를 통해서 주파수 효율성을 높일 뿐만 아니라 중계기의 사용으로 시스템의 커버리지를 확장시킬 수 있는 장점을 가진다. 그러나 기존의 연구들에서는 주파수 공유를 위해서 이차 사용자가 일차 사용자 사이와의 채널 정보를 완벽하게 알아야 한다고 가정한다. 그러나 이 채널 정보는 시변 특성 또는 피드백 지연 등의 이유로 이차 사용자가 불완전한 채널 정보를 얻게 된다. 이러한 불완전한 채널 정보로 인하여 결국 이차 사용자는 간섭 제약을 위반하게 되고 주파수를 공유할 수 없게 된다. 따라서 이 문제를 극복하기 위해서 본 논문에서는 일차 사용자의 허용 가능한 outage확률 간섭 제약을 만족하는 이차 사용자의 파워 할당 기법을 제안한다. 제안된 파워 할당 기법은 순시적인 채널 정보를 사용하지 않기 때문에, 이차 사용자의 피드백 부담을 덜어줄 뿐만 아니라 지연된(outdated) 채널 환경에 관계없이 간섭 제약을 만족시키는 장점을 가진다.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.925-936
• /
• 2023

Currently, due to the rapid increase in power demand and the increase in capacity of power converters, the capacity of electromagnetic contactors is also increasing, and the burden on SMPS for the power that can drive them is increasing. Although the initial starting operation current of an electromagnetic contactor is significantly larger than the holding current for maintaining contact, most electromagnetic contactors apply the same voltage as the initial starting operation. An electromagnetic contactor must continuously apply a holding current to maintain the contact point, and the larger the capacity, the larger the current must be applied. This paper proposes a two-level magnetic contactor drive that allows setting the initial starting operation current to fully attach the contact point of the magnetic contactor and the holding current to maintain subsequent operation. In addition, a low-cost drive topology of analog and digital methods was proposed for various field applications, and an algorithm based on the ripple of the excitation current was proposed to determine whether the magnetic contactor was opened or closed without using a separate contact point. The feasibility of the proposed method was proven through Psim simulation experiments.

• 자원ㆍ환경경제연구
• /
• 제30권4호
• /
• pp.627-648
• /
• 2021

미세먼지 계절관리제는 미세먼지 고농도 시기인 겨울철에 수송, 발전, 산업, 생활 부문에서 강화된 저감 조치를 시행하는 정책을 말한다. 미세먼지 계절관리제는 규제정책으로 사회적 비용을 발생시키고, 다양한 경제주체에게 전가가 된다. 비용부담에 있어서 형평성은 중요한 문제이다. 따라서 본 연구에서는 발전 부문의 비용이 균등하게 배분되는지 확인하기 위해 각 발전사의 석탄발전 저감량을 이용해 발전사별 비용을 분석하였다. 특히, 정책의 시간가변효과를 파악할 수 있는 합성대조법을 적용해 미세먼지 계절관리제가 발전사의 석탄발전량에 미치는 효과를 분석하였다. COVID-19 사태로 인해 일부 전력 수요가 감소한 효과를 감안하더라도 미세먼지 계절관리제가 석탄발전소의 연료 사용량, 발전량을 감소시켜 발전 부문의 비용 증가가 나타나는 것을 확인할 수 있었다. 그러나 이러한 비용은 발전사별로 균등하게 배분되지 않고, 특정 발전사에 가중되는 것을 확인할 수 있었다. 미세먼지 계절관리로 인해 발생하는 사회적 비용이 이해관계자들에게 형평성 있게 부담되도록 개선할 필요가 있다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.909-914
• /
• 2008

A coupling capacitor voltage transformer(CCVT) is used in an extra or ultra high voltage system to obtain the standard low voltage signal for protection. To avoid the phase angle error between the primary and secondary voltages, a tuning reactor is connected between a capacitor and a voltage transformer. The inductance of the reactor is designed based on the power system frequency. If a fault occurs on the power system, the secondary voltage of the CCVT contains some errors due to a dc offset component and harmonic components resulting from the fault. The errors become severe in the case of a close-in fault. This paper proposes an algorithm for compensating the secondary voltage of a CCVT in the time-domain. From the measured secondary voltage of the CCVT, the secondary and primary currents are obtained; then the voltage across the capacitor and the inductor is calculated and then added to the measured secondary voltage to obtain the correct primary voltage. Test results indicate that the proposed algorithm can compensate the distorted secondary voltage of the CCVT irrespective of the fault distance, the fault inception angle, and the burden of the CCVT.

• 드라이브 ㆍ 컨트롤
• /
• 제17권2호
• /
• pp.38-44
• /
• 2020

Various efforts have been initiated to reduce the energy consumption of the compressor as it is one of the approaches to saving a large portion of the fixed cost of the production site. Various results of reducing the energy consumption of the compressor have been reported, but to reduce the energy consumption of the compressors fundamentally, regular management of the compressor should ensure optimum operation. This requires periodic on-site visits by experts, but is often overlooked as a cost issue, resulting in the use of the compressor in low-efficiency conditions. Thus, it is necessary to develop a low-cost evaluation technology for compressor condition monitoring and efficiency analysis to ensure that the compressor is always driven at the optimum efficiency without imposing undue burden on the compressor user. In this study, a sensor was installed at the inlet, outlet, and power supply of the compressor, and a method for evaluating the energy consumption of the compressor using the minimum sensor was derived. The experimental results are presented to show the validity of the proposed method. It was confirmed that the energy consumption of the compressor can be easily as well as efficiently evaluated by using the method developed in this study.

• 한국멀티미디어학회논문지
• /
• 제2권1호
• /
• pp.99-108
• /
• 1999

본 논문에서는 계산량이 크게 증가하지 않으면서 음향 반향 제거기의 성능을 향상시키는 잡음에 강건한 알고리즘을 제안한다. 제안하는 알고리즘은 NLMS 알고리즘을 기반으로 적응 상수를 기준 입력신호와 마이크 입력신호의 전력합으로 정규화한다. 마이크 입력으로 근단화자의음성신호와 잡음이 입력되면 그 전력만큼 적응 상수가 작아지기 때문에 이들 주변 잡음신호에 의한 계수 오조정을 줄일 수있다. 따라서 제안하는 알고리즘은 동시통화와 주변 잡음이 있는 상황에서 반향 제거 기능을 잘 수행한다. 제안하는 알고리즘의 수렴 속도는 반향 신호가 10~20 dBSPL 정도 감쇠되기 때문에 NLMS 알고리즘에 비해서 크게 느려지지 않는다. 본 논문에서는 제안하는 알고리즘의 성능을 분석하고 기존의 알고리즘과 비교한다.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1369-1379
• /
• 2018

In this paper, a model predictive torque control (MPTC) without the use of a weighting factor for surface mounted permanent-magnet synchronous machine (SPMSM) drive systems is presented. Firstly, the desired voltage vector is predicted in real time according to the principles of deadbeat torque and flux control. Then the sector of this desired voltage vector is determined. The complete enumeration for testing all of the feasible voltage vectors is avoided by testing only the candidate vectors contained in the sector. This means that only two voltage vectors in the sector need to be tested for selecting the optimal voltage vector in each control period. Thus, the calculation time can be reduced when compared with the conventional enumeration method. On the other hand, a novel cost function that only includes the dq-axis voltage errors between the desired voltage and candidate voltage is designed to eliminate the weighting factor used in the conventional MPTC. Thus, the control complexity caused by the tuning of the weighting factor is effectively decreased when compared with the conventional MPTC. Simulation and experimental investigation have been carried out to verify the proposed method.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1053-1058
• /
• 2013

Because of computational burden and complex topology of substation, a transmission overload relief using circuit-breaker switching was very complex and difficult. However, a on-line algorithm for reducing the overloads in transmission lines has made progress due to the advance of IT technology. This paper describes the methodology for alleviating the overloads in transmission lines by circuit-breaker switching. First, the severe contingency lists and substations were selected from the results of contingency analysis. Then the switch combinations are determined using circuit-breakers of the selected substation. The topology changes are limited to equipment outage, bus split, island split, bus merge and island merge. Finally, the fast screening and full analysis methods are used to analyze the overload in transmission lines. To verify the performance of the proposed methodology, we performed a comprehensive test for both test system and large-scale power systems. The results of these tests showed that the proposed methodology can accurately alleviate the overloads in transmission lines from online data and can be applied to on-line applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.93-95
• /
• 2005

Coupling capacitor voltage transformers (CCVT) are widely used in high voltage power systems to obtain standard low voltage signal for protective relaying and measuring instruments. To obtain high accuracy, capacitances and inductances are tuned to the power system frequency, making a parallel resonant circuit. When no fault occurs, no distortion of the secondary voltage is generated. However, when a fault occurs, harmonics generated break the resonance between capacitances and inductance, which generates the distortion of the secondary voltage. This paper proposes an algorithm for compensating the secondary voltage of the CCVT. With the values of the secondary voltage of the CCVT, the secondary currents, the primary currents and the voltages across the capacitors and inductor are calculated. Test results indicate that the proposed algorithm can compensate the distorted secondary voltage of the CCVT, and is irrespective of the fault distance, the fault inception angle and the burden.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2732-2734
• /
• 2005

In present, most of metallic structures(gas pipeline, oil pipeline, water pipeline, etc) are running parallel with subway and power line in seoul. Moreover subway system and power line make a stray current due to electrical corrosion on metallic structures. The owner of metallic structures has a burden of responsibility for the protection of corrosion and the prevention against big accident such as gas explosion or soil pollution and so on. So, they have to measure and analyze the data about P/S(Pipe to Soil) potential due to stray current of subway system. So, we have developed the Real-time Wireless Remote Monitoring System for Stray Current of Subway System. In this system, the permanent buried type reference electrode is necessary. In this paper, results of development about the permanent buried type reference electrode($Cu/CuSO_4$) are presented.