• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.376-381
• /
• 2014

We present a CMOS rail-to-rail class-AB amplifier using dynamic current biasing to improve the delay response of the error amplifier in a low-dropout (LDO) regulator, which is a building block for a wireless power transfer receiver. The response time of conventional error amplifiers deteriorates by slewing due to parasitic capacitance generated at the pass transistor of the LDO regulator. To enhance slewing, an error amplifier with dynamic current biasing was devised. The LDO regulator with the proposed error amplifier was fabricated in a $0.35-{\mu}m$ high-voltage BCDMOS process. We obtained an output voltage of 4 V with a range of input voltages between 4.7 V and 7 V and an output current of up to 212 mA. The settling time during line transient was measured as $9{\mu}s$ for an input variation of 4.7-6 V. In addition, an output capacitor of 100 pF was realized on chip integration.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.694-697
• /
• 2016

Up-converted phase noise, which is induced by the low-frequency relative intensity noise (RIN) of a laser through AM-PM conversion within a photodetector (PD), is first measured here by means of a cross-correlation method. Our proposed measurement system can isolate the RIN-induced phase noise from noise contributions of other components, such as amplifiers, modulators, and mixers. In particular, shot noise and thermal noise generated from the PD are also suppressed by this method, so that standalone characteristics of the RIN-induced phase noise can be obtained. Experimental results clearly show the quantitative relationship between the RIN-induced phase noise and the incident optical power of the PD. Our findings indicate that the least RIN-induced phase noise appeared at the saturation point of the PD, which is about -162 dBc/Hz at 10 kHz offset.

• Journal of Semiconductor Engineering
• /
• 제1권2호
• /
• pp.64-73
• /
• 2020

As CMOS technology scales down, the design of analog signal processing circuit becomes far more difficult because of steadily decreasing supply voltage and smaller intrinsic gain of transistors. With sub-1V supply voltage, the conventional analog signal processing relying on high-gain amplifiers is not an effective solution and different approach has to be sought. One of the promising approaches is "time-domain analog signal processing" which exploits the improving switching speed of transistors in a scaled CMOS technology. In this paper, various time-domain analog signal processing techniques are explained with some experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3190-3192
• /
• 1999

A Novel wide-band wide-tunable current-mode (CM) gamma corrector for HDTV camera applications is proposed. The gamma corrector provides accurate gamma control in a wide range by simple electrical adjustment of weighting amplifiers' gain. It has wide signal bandwidth more than 40MHz sufficient for HDTV video signal processing and is implementable with simple integrated circuit with low power dissipation of 125mW.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 춘계종합학술대회
• /
• pp.383-388
• /
• 1998

이동통신에서, 신호의 페이딩을 보상하기 위하여 pilot symbol assisted modulation(PSAM)에 대한 많은 연구가 진행 되어왔다. 본 논문에서는 최대비합성다이버시티를 사용하는 PSA-QAM에서 전력증폭기 비선형성의 효과를 분석하였다. 먼저, PSAM성능의 한계를 구하기 위하여, 페이딩에 대한 완벽한 정보가 주어진 상태에서 최대비합성다이버시티를 갖는 QAM의 이론적 성능을 분석하였다. 실제 PSAM에서, 페이딩에 대한 정보는 파일럿 심볼의 보간에 의하여 얻어진다. 오차의 평균전력을 최소화하는 보간필터를 사용하여 필터의 탭수, 파일럿 심볼프레임 주기, 도플러 주파수가 성능에 미치는 영향을 분석하였다. 비선형 전력증폭기 AB, B, C급의 AM/AM, AM/PM 특성을 성능분석에 고려하였다. 비선형 보상기술인 Cartesian Feedback Loop (CFB) 이용하여 AWGN 채널과 Rayleigh 페이딩 채널에서 비선형 전력증폭기 종류에 따른 성능변화를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.22-25
• /
• 2004

In active noise control (ANC) system, the convergence behavior of the Filtered- X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortion in the secondary path as in the power amplifiers (e.g., saturation), loudspeakers and transducers. This distortion may yields degrading the error reduction performance of the ANC systems. In this paper, the authors of this paper propose a more improved and stable FXLMS algorithm to compensate for the undesirable nonlinearity of the secondary-path, whereby the third-order Volterra model was employed for the identification of the nonlinear secondary-path. In particular, the proposed approach was based on the modification of the conventional FXLMS algorithm. Finally, the simulation results showed that the proposed approach yields better convergence property and more stable performance in the ANC systems.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.172-173
• /
• 2002

An erbium-ytterbium co-doped phosphate glass waveguide amplifier, fabricated by two-step ion-exchange, is presented. The performance of the amplifiers are investigated in viewpoints of net gain, pump power, and noise figure. The waveguide has propagation loss of 0.7 dB/cm Including insertion loss at 1.304 $\mu\textrm{m}$. At a signal wavelength of 1.534 $\mu\textrm{m}$, a high net gain of 12.8 dB and low noise figure of less than 3.9 dB are archived in a 4 cm long waveguide when injected by 140 ㎽ of LD pump at 0.98$\mu\textrm{m}$ in single pass configuration.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.69-73
• /
• 2002

We have designed and fabricated a low-cost, V-band CPW receiver chip set using GaAs PHEMT technology for the application of millimeter-wave wireless communication systems. Low noise amplifiers and down-converters were developed for this chip set. The fabricated low noise amplifier showed an S$\sub$21/ gain of 14.9 ㏈ at 60 ㎓ and a noise figure of 4.1 ㏈ at 52 ㎓. The down-converter exhibited a high conversion gain of 2 ㏈ at the low LO Power of 0 ㏈m. This work demonstrates that the GaAs PHEMT technology is a viable low-cost solution for V-band applications.

• 전자공학회논문지
• /
• 제50권4호
• /
• pp.229-235
• /
• 2013

본 논문은 최근 활발하게 연구되고 있는 뇌-기계 접속을 위한 완전 삽입형 마이크로 시스템의 구현에 있어서 중요한 이슈들을 고찰한다. 현재까지의 과학 기술적 연구는 신경 신호 증폭기, 무선 신호 전송 등 주로 고성능 저전력 전자기기 및 시스템을 구현하는데 집중되어 왔으나, 마이크로 시스템의 실제적인 응용은 전자 기기의 특성뿐만 아니라 밀봉 구조의 디자인에서 뇌의 생리 해부학적 특성에 이르기까지 여러 가지 요인에 의해 영향을 받게 된다. 본 논문은 특히 뇌 삽입형 마이크로 시스템의 실질적인 구현에 결정적인 영향을 주는 시스템 발열의 영향, 신경 프로브의 감지 부피, 무선 데이터 전송 및 전력 전달, 그리고 뇌의 생리 해부학적인 고려 요인에 대해 논의한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.223-246
• /
• 2015

Structural vibration control using a piezoelectric shunt is an established control technique. This technique involves connecting a piezoelectric patch, which is bonded onto or embedded into the vibrating structure, to an electric shunt circuit. Thus, vibration energy is converted into electrical energy and is dissipated through a network of electrical components. Different configurations of shunt have been researched, among which the negative capacitance-inductance shunt has gained prominence recently. It is basically an analog, active circuit consisting of operational amplifiers and passive elements to introduce real and imaginary impedance on the vibrating structure. The present study attempts to model the behavior of a negative capacitance-inductance shunt in terms of power output and efficiency using circuit modeling software. The shunt model is validated experimentally and is used to control the structural vibration of an aluminum beam, connected to a pair of piezoelectric patches, under broadband excitation. The model is also used to determine the optimal parameters of a negative capacitance-inductance shunt to increase the efficiency and predict the voltage output limit of op-amp against the supply voltage.