• Journal of electromagnetic engineering and science
• /
• 제9권4호
• /
• pp.188-193
• /
• 2009

A K-band low-power miniaturized planar-type hyperthermia system was developed to replace massive and expensive equipment. The system consists of a VCO with a buffer amplifier, a high-power amplifier module, a 20-dB-coupled line coupler, a chip circulator and two power detectors for signal generation, amplification and power monitoring. All these components have been implemented in planar form on two module blocks. The total size of the hyperthermia system was less than $10\times6.5\times3\;cm^3$. In order to verify the system performance, ablations were carried out on nude mice xenografted with human breast cancer. Ablation results show performance comparable to the massive components-based system. This work shows the feasibility of a low-cost miniaturized hyperthermia system for practical clinical applications.

• 한국콘텐츠학회논문지
• /
• 제6권4호
• /
• pp.1-10
• /
• 2006

본 논문에서는 2.4GHz 대역에서의 응용을 위한 광대역 RF 모들을 설계하고 제작하였다. 무선 주파 신호를 중간 주파수로 변환하기 위한 RF 모듈은 3단 증폭기로 이루어진 저잡음 증폭기(LNA), 단종단 게이트 믹서, 정합 회로, 헤어핀 라인 대역 통과 필터, 쳬비셰프 저역 통과 필터로 구성하였다. 저잡음 증폭기는 높은 이득과 안정도를 갖도록 설계하였으며, 단종단 게이트 믹서는 높은 변환이득과 넓은 동작 영역을 갖도록 설계하였다. 광대역 RF모듈의 해석에서는 복합화된 하모닉 밸런스드 기법을 사용하여 RF모듈의 동작 특성을 해석하였다. 설계된 RF 모듈은 55.2dB의 변환이득, 1.54dB의 낮은 잡음 특성, $-120{\sim}-60dBm$의 넓은 RF전력 동작 영역, -60dBm의 낮은 고조파 성분 그리고 RF, IF, LO포트 간에 우수한 분리 특성을 갖는다.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.325-333
• /
• 2007

A PV system inverter test module using RTDS was developed and performance test of a commercial PV inverter was carried out. The developed module consists of one RTDS hardware rack, RTDS software models representing PV array and simple distribution system, and two power amplifiers that was specifically designed for generating power corresponding to signals from RTDS. Performance test results verified effectiveness and reliability of the test module. It is expected that the developed test module may help PV inverter manufacturers improve ana test their systems in the developing stage.

• 한국전자파학회논문지
• /
• 제26권3호
• /
• pp.276-282
• /
• 2015

지금까지 LDMOS를 사용한 전력증폭기는 AB-급 및 도허티 방식으로 60 MHz 대역폭의 협대역에서 55 %의 효율을 보여주고 있으나, 기지국의 전력증폭 모듈의 RRH의 적용에 따라 100 MHz 이상의 대역폭 확장과 60 % 이상의 고효율 전력증폭기를 요구하고 있으므로, 본 연구에서는 GaN 소자를 이용하여 2차 고조파 부하가 순수한 리액턴스 성분만을 포함하고, 광대역 특성을 갖도록 출력단 정합회로를 최적화하여 J-급 전력증폭기를 설계하였다. 측정 결과, W-CDMA 주파수 대역을 포함한 1.6~2.3 GHz에서 연속파 신호를 입력하였을 때 60~75 %의 전력 부가 효율 특성을 갖는 45 W급 J-급 전력증폭기를 구현하였다.

• 정보학연구
• /
• 제10권3호
• /
• pp.77-92
• /
• 2007

This study aims to suggest an implementation methodology of security module for data integrity of mobile internet terminal. This is based on the WTLS(Wileless Transport Layer Security) of WAP Protocol. This security module is expected to achieve central role in conversion of wireless internet environment and emphasis of encryption technology and safe and calculable wireless communication environment construction.

• 전기전자학회논문지
• /
• 제17권4호
• /
• pp.393-397
• /
• 2013

This paper introduces the T/RX combined compact active channel module which is a key unit of the active phased array antenna(APAA) system. This module is mainly compoased of two parts for TX and RX fabricated on both sides of the active module for size reduction. The TX-part is primarily composed of a 3-stage amplifier, a microstrip phase shifter, a thermal compensation and a power detection circuit. The RX-part is composed of LNAs a microstrip phase shifter and BPFs for TX power rejection. Using the proposed design structure we can realized a compact active channel module having high performance.

• 한국군사과학기술학회지
• /
• 제12권4호
• /
• pp.446-451
• /
• 2009

In this paper, we described the design and test results of a high output power amplifier MMIC developed by using 0.5um power pHEMT processes on a 6-inch GaAs wafer for the X-band T/R module application. In the MMIC design, we have used a simple on-chip gate active bias technology to compensate the threshold-voltage variation of pHEMT during the fabrication process and 16-to-1 power combining method to achieve the output power over 10watt. The fabricated chip has an output power over 12watts and maximum PAE of 32% over the frequency range of fo +/-750MHz.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.225-228
• /
• 2016

KRISS-V, a V-band millimeter-wave source module for a primary RF power standard and calibration system developed by the Korea Research Institute of Standards and Science is here presented. The output power of KRISS-V is several times higher than that of commercial amplifier/multiplier chains and is highly stable (the standard deviations of output power are less than 0.01% in the worst case). The spectral purity of KRISS-V is high enough to consider it a single-tone signal generator. We also added programmable attenuation capability to KRISS-V for remote power control. Moreover, the in-house source module is cost-effective and adaptable to various measurement schemes. The structure of the model as well as detailed component information are introduced so that it can be reproduced.

• 한국정보전자통신기술학회논문지
• /
• 제1권3호
• /
• pp.41-47
• /
• 2008

본 연구에서는 기존의 청진기를 대체할 수 있으며, 멀티미디어 PC에 연결할 경우 청진음의 저장이 가능하여 병원에 직접 방문하지 않고 가정에서 청진음을 저장하고 초고속 통신망을 통해 병원에 전송함으로써 가정에서도 쉽게 정기적인 검진이 가능한 홈 헬스케어를 위한 무구속 정자청진 모듈을 개발하고자 하였다. 이를 위하여 저잡음, 고이득, 저전력 그리고 저전압 구동의 특징을 갖도록 전자청진기용 증폭기를 설계하였으며, 제작된 전자청진 회로를 이용하여 심음 측정에 중요한 요소로 판단되는 집음기를 재질, 크기별로 제작하여 테스트 하였다.

• 전자공학회논문지A
• /
• 제30A권5호
• /
• pp.45-51
• /
• 1993

An erbium doped fiber amplifier(EDFA) pumped by aingle 1.48$\mu$m LD was fabricated, and its gain and noise characteristics were measured. As a signal source, 1548 nm wavelength DFB LD was used. The small signal net gain of the EDFA module was 21.8 dB with maximum gain coefficient 0.7dB/mW for the erbium fiber length of 17.6 m, the pump power of 58 mW, and an input signal power of -25 dBm, respectively. The saturation power of the EDFA was 1 dBm for the input signal power of -5 dBm and the noise figure, measured by using an optical spectrum analyzer, was 5.8 dB for the input signal power of -40 dBm.