• 한국정보통신학회논문지
• /
• 제18권10호
• /
• pp.2339-2344
• /
• 2014

마이크로스트립 선로 형태의 전송선로 밑면에 플로팅 동판을 위치시키면 플로팅 동판과 접지면 사이의 단락 또는 개방 연결에 따라 전송선로는 마이크로스트립 선로 또는 코플라나 선로 형태로 동작하게 된다. 이러한 동작은 하나의 전송 선로 폭에 대해 서로 다른 두 개의 특성 임피던스를 가질 수 있음을 의미한다. 플로팅 동판이 존재하는 마이크로스트립 전송 선로를 이용하여 안정적인 입력 정합 상태를 가지며 조건에 따라 단순히 신호를 전달하는 2-단자 전력 전송 선로 또는 전력 분배가 가능한 2-way 전력 분배 회로로 동작할 수 있는 가변 전송선로를 제안 및 제작하였다. 제안된 회로는 코플라나 선로로 동작하는 경우에는 전력 전송 선로로 동작하고, 마이크로스트립 선로로 동작하는 경우에는 2-way 전력 분배 회로로 동작한다. 제작된 가변 전송 선로는 700 MHz 이상의 주파수에서 전력 전송 선로로 동작하는 경우 -0.2 dB 이내의 전달 손실($S_{21}$)과 -15 dB 이하의 반사 계수($S_{11}$)를 보였으며, 전력 분배 선로로 동작하는 경우에는 -10 dB 이하의 반사 계수($S_{11}$), -3.8 dB이내의 전달 손실($S_{21}$ or $S_{31}$), ${\pm}0.3dB$이내의 출력 전력차($S_{21}/S_{31}$)를 보였다.

• 전기학회논문지
• /
• 제59권3호
• /
• pp.531-535
• /
• 2010

345kV Incheon Thermal Power Plant Transmission Line Collapse Analysis and Countermeasures. The Typhoon Galmaegi which had been formed in July 15, 2008 diminished into a tropical cyclone and cooled the air above the West Sea. The cooled air colliding with the warm inland air caused a strong whirlwind at some places in the west seaside; the whirlwind battered the 345kV Incheon Thermal Power Plant Transmission Line to be collapsed. The resistance of transmission towers against wind pressure, one of the key elements in transmission line engineering, is designed to endure the pressure corresponding to the maximum instantaneous wind speed. Before the above accident happened, no transmission line has ever been collapsed by a whirlwind. So this paper is aimed to analyze causes that collapsed 345kV Incheon Thermal Power Plant transmission line and to introduce countermeasures.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.29-32
• /
• 2005

본 논문에서는 right/left-handed특성을 이용한 8 포트 동위상 전력분배기를 제안한다. 이 전력분배기는 사용되는 전송선의 전기적 길이에 상관없이 동위상 분배가 가능하기 때문에 전력 분배기의 크기를 크게 줄일 수 있다. 전력분배기에 사용되는 전송선의 길이가 짧을수록 광대역 특성을 보이며 분배기의 크기는 줄어든다.

• 한국융합학회논문지
• /
• 제4권4호
• /
• pp.49-57
• /
• 2013

The lightning shielding of different 500 kV HVAC-TL high voltage AC transmission lines was analyzed. The studied transmission lines were horizontal flat single circuit and double circuit transmission lines. The lightning attractive areas were drawn around power conductors and shielding wires. To draw the attractive areas of the high voltage transmission lines, transmission line power conductors, shielding wires and lightning leader were modeled. Different parameters were considered such as lightningslope, ground slope and wind on lightning attractive areas. From the calculated results, the power conductors voltages affected on attractive areas around power conductors and shielding wires. For negative lightning leader, the attractive area around the transmission line power conductor increased around power conductors stressed by positives voltage and decreased around power conductors stressed by negative voltage. In spite of this, the attractivearea of the transmission line shielding wire increasedaround the shielding wire above the power conductor stressed by the positive voltage and decreased around the shielding wire above the power conductor stressed by negative voltage. The attractive areas around power conductors and shielding wires were affected by the surrounding conditions, such as lightning leader slope, ground slope. The AC voltage of the transmission lines made the shielding areas changing with time.

• 한국위성정보통신학회논문지
• /
• 제12권4호
• /
• pp.146-151
• /
• 2017

본 논문은 전력선 통신 시스템에서 에너지 효율을 최적화하기 위해 송신 전력 및 부 채널 할당을 최적화하는 에너지 효율적인 자원 할당 알고리즘을 제안하였다. 제안한 알고리즘은 특히 수신기에 최대의 신호 전력을 전달하기 위해서 기존의 연구와 다르게 주파수에 따라 변하는 전력선 채널의 특성을 시스템 모델에서 고려하였다. 또한, 에너지 효율 함수를 최대화 할 때 송신기의 최대 신호전력 한계 및 최소 데이터 전송률 만족 등 현실적인 제한조건들을 고려하여 전송 알고리즘을 설계하였다. 따라서 본 논문에서는 비선형 분수 프로그래밍과 라그랑지 이중 기법을 이용하여 최적값을 산출하였고 시뮬레이션을 통해 베이스라인 기법 대비 제안한 알고리즘의 에너지 효율 성능의 우수성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.171-173
• /
• 2002

This paper presents a power system decomposition technique for digital simulation of large power system. To decompose power system, distributed transmission line model is used. But this model can be used only for long transmission lines. In this paper, capacitor compensation method is proposed to use distributed transmission line model for short transmission line. And case study shows proposed method can be used for effective power system decompositon in digital simulation of large power system.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.283-287
• /
• 2003

A new method to miniaturize ${\lambda}/4$ transmission line of power divider is proposed. The method utilizes simple combination of the shorted coupled-line pair instead of the transmission line with very high impedance and shunt lumped capacitors. The length of ${\lambda}/4$ transmission line of power divider is about 16% over the conventional power divider at 1 GHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.199-201
• /
• 2003

Because of Korean power system characteristics and increasing power demand, the need of 765kV transmission line is growing gradually. Now a days, KEPCO's 765kV transmission line has been tested and stands for commercial operation. During the first stage, 765kV transmission line will be operated with two voltage grades of 765kV and 345kV, which results the unbalance of power system. So unbalanced current such as zero sequence current flows in the transmission line. In this paper, we describes the simulation study of 765/345kV parallel transmission line by using EMTDC program.

• 유공압시스템학회논문집
• /
• 제1권2호
• /
• pp.20-25
• /
• 2004

In this study, a position control characteristics of pneumatic cylinder with transmission line is analyzed. Dynamic characteristics of transmission line using compressible fluid is changed by the flowing stiles of the fluid the diameter and the length of the line. But, the effect of the change of dynamic characteristics of transmission line by the flowing states on the position control characteristics can be neglected because of the friction force of the pneumatic cylinder. So, We assume that the position control characteristics is affected by the diameter and length of the transmission line. The experimental results according to the change of parameter of the transmission line show that the relation between the parameter of the transmission line and the position control characteristics of pneumatic cylinder driving system with the transmission line.

• 로봇학회논문지
• /
• 제10권1호
• /
• pp.9-15
• /
• 2015

We present a robust power transmission lines detection method based on vanishing point estimation. Vanishing point estimation can be helpful to detect power transmission lines because parallel lines converge on the vanishing point in a projected 2D image. However, it is not easy to estimate the vanishing point correctly in an image with complex background. Thus, we first propose a vanishing point estimation method on power transmission lines by using a probabilistic voting procedure based on intersection points of line segments. In images obtained by our system, power transmission lines are located in a fan-shaped area centered on this estimated vanishing point, and therefore we select the line segments that converge to the estimated vanishing point as candidate line segments for power transmission lines only in this fan-shaped area. Finally, we detect the power transmission lines from these candidate line segments. Experimental results show that the proposed method is robust to noise and efficient to detect power transmission lines.