• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1771-1776
• /
• 2017

최근 IoT(Internet of Things)는 다양한 분야에 활용되어 특정 장소에 스마트 환경을 구성함으로써 사용자들에게 서비스를 제공하고 있다. 그러나 기존 시스템은 주변 환경의 변화에 따라 디바이스의 동작과 작업이 변화하지 않기 때문에 사용자는 환경 및 상황이 변화할 때마다 수동적으로 동작해야 한다. 이에 본 논문에서는 실시간 데이터 분류 기반 상황별 작업 제어 시스템을 제안한다. 센서 데이터를 서버로 전송하고 실시간, 비 실시간 데이터로 분류한 뒤 의사 결정 트리에 삽입하여 상황에 따른 작업을 식별한다. 또한 위험상황을 가스 누출 및 화재 발생과 같이 2단계로 나눠 경고 메시지를 전송한다. 이에 따라 전력의 낭비와 오작동 발생을 감소시킬 수 있으며 작업 효율이 증대된 서비스를 제공받을 수 있을 것으로 사료된다.

• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.452-459
• /
• 2020

전동 엑추에이터는 사용자의 명령 입력 신호(열림/닫힘/정지)를 받아 엑추에이터 내부의 각종 센서(밸브의 위치, 회전력, 모터의 상태 등)들의 상태를 확인하고 모터를 정/역 제어하여 밸브를 개폐하고 엑추에이터(밸브)의 현재 상태를 출력하는 장치로 댐, 발전소, 상하수도 시설, 송유관 시설 등 다양한 분야에서 사용하는 장치이다. 전동 엑추에이터가 발전소 등에 설치되어 가동 중 문제가 발생할 경우 경제적으로 큰 손실이 발생할 수 있으므로 시스템의 신뢰성이 매우 중요하다. 본 연구에서는 전동 엑추에이터의 안전성을 높이기 위해 소프트웨어적으로 발생할 수 있는 신뢰성 문제를 하드웨어적으로 ON/OFF 시간 설정이 가능한 전동 엑추에이터 컨트롤 장치 개발을 진행하였다. 또한 전동 엑추에이터 제어 장치 개발 환경은 Xilinx 사의 Spartan7 FPGA와 Altium 툴을 활용하여 개발하였다.

• 신재생에너지
• /
• 제7권4호
• /
• pp.58-65
• /
• 2011

In variable-speed variable-pitch wind turbines, the conventional approach for controlling power-production operation relies on a generator-torque controller and a rotor-collective blade-pitch controller. Both controllers use the generator speed measurement as the sole feedback input. In order to mitigate unwanted excitation of the control system, many filters are adopted. In this study, the characteristics of some filters for signal processing are investigated based on frequency response function. They include low-pass filters, band-pass filters, and notch filters. Especially, this study focuses on design parameters of their filters.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권5호
• /
• pp.250-256
• /
• 2003

In this papur, the STATCOM (STATic synchronous COMpensator) application for efficient operations of wind farm is described. The wind farm connected with the electric power network is one of good alternative energy sources. However, it would be also highly possible that interconnection of wind farm causes unwanted influences on distribution system operation, protection and control. This paper proposes the STATCOM application for reducing the negative effects from interconnection of wind farm with distribution networks. The simulation results show that STATCOM would be on effective and useful device to resolve the bad influences from wind farm on distribution networks and improve the operational efficiency of wind farm. In the simulation, the radial distribution network of IEEE 13 bus was modeled using PSCAD/EMTDC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2685-2687
• /
• 1999

This paper is concerned on developing DC-DC converter. In contrast to resonant converter, this converter requires no external resonant elements and operates with constant switching frequency. In conventional PWM converter, two MOSFET switches of the converter are simultaneously turned on and turned off. In presented converter, to achieve Zero Voltage Switching, the two legs of the bridge are operated DC-DC converter is phase shifted. Phase shifted Full Bridge ZVS PWM Converter have an effect on the power system. Operation principle and features are illustrated by the experiment results from 50W, 250kHz with MOSFET switch.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.36.2-36.2
• /
• 2011

In variable-speed variable-pitch wind turbines, the conventional approach for controlling power-production operation relies on a generator-torque controller and a rotor-collective blade-pitch controller. Both controllers use the generator speed measurement as the sole feedback input. In order to mitigate unwanted excitation of the control system, many filters are adopted. In this study, the characteristics of some filters for signal processing are investigated based on frequency response function. They include low-pass filters, band-pass filters, and notch filters. Especially, this study focuses on design parameters of their filters.

• International Journal of Automotive Technology
• /
• 제2권2호
• /
• pp.39-45
• /
• 2001

Hydrogen is seen as one of the important energy vectors of the next century. Hydrogen as a renewable energy source, provides the potential for a sustainable development particularly in the transportation sector. Hydrogen driven vehicles reduce both local as well as global emissions. The laboratory of transporttechnology (University of Gent) converted a GM/Crusader V-8 engine for hydrogen use. Once the engine is optimised, it will be built in a low-floor midsize hydrogen city bus for public demonstration. For a complete control of the combustion process and to increase the resistance to backfire (explosion of the air-fuel mixture in the inlet manifold), a sequential timed multipoint injection of hydrogen and an electronic management system is chosen. The results as a function of the engine parameters (ignition timing. injection timing and duration, injection pressure) we given. Special focus is given to topics related to the use of hydrogen as a fuel: ignition characteristics (importance of electrode distance), quality of the lubricating oil (crankcase gases with high contents of hydrogen), oxygen sensors (very lean operating conditions), noise reduction (configuration and length of inlet pipes). The advantages and disadvantages of a power regulation only by the air to fuel ratio (as for diesel engines) against a throttle regulation (normal gasoline or gas regulation) are examined. Finally the goals of the development of the engine are reached: power output of 90 kW, torque of 300 Nm, extremely low emission levels and backfire-safe operation.

• 한국항공우주학회지
• /
• 제41권11호
• /
• pp.921-930
• /
• 2013

(주)쎄트렉아이는 고해상도 전자광학카메라인 EOS-D Ver.1.0의 개발 및 검증을 성공적으로 완료하였다. EOS-D Ver.1.0 시스템은 기존 EOS-C 계열 대비 향상된 공간 해상도 및 방사학적 해상도를 갖도록 설계되었다. EOS-D Ver.1.0의 열제어계는 능동 열제어 방식과 수동 열제어 방식을 혼용하여 개발되었다. 또한, 광학계 주구조물의 수분 발산 효과에 의한 비정렬 상태를 보상할 수 있도록 초점 조절장치(refocusing mechanism)를 설계하고 이를 검증하였다. 설계를 바탕으로 실제 모델을 제작, 인증 수준의 열진공 시험을 통해 설계 여유(design margin)와 작업도(workmanship)를 확인하였다. 또한 열-수치 모델(TMM)에 대한 검증 작업을 수행하여 해석 모델이 실제 모델의 열적 특성을 잘 모사하고 있음을 확인하였다.

• 대한임베디드공학회논문지
• /
• 제14권1호
• /
• pp.33-41
• /
• 2019

We propose an embedded solution to design a high-speed and high-accuracy 16bit analog-digital signal processing interface for the control systems using various external analog signals. Choosing TMS320F28377D micro controller unit (MCU) featuring high-performance processing in the 32-bit floating point operation, low power consumption, and various I/O device supports, we design and build the proposed system that supports both 16-bit analog-digital converter (ADC) interface and high precision digital-analog converter (DAC) interface. The ADC receives voltage-level differential signals from fully differential amplifiers, and the DAC communicates with MCU through 50 MHz bandwidth high-fast serial peripheral interface (SPI). We port the boot loader and device drivers to the implemented board, and construct the firmware development environment for the application programming. The performance of the entire implemented system is demonstrated by analog-digital signal processing tests, and is verified by comparing the test results with those of existing similar systems.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1135-1144
• /
• 2024

With the increasing ratio of renewables in the grid, a low-carbon and stable base load source that also is capable of load tracking is in demand. Sodium cooled fast reactors (SFRs) coupled to thermal heat storage system (THS) is a strong candidate for the need. This research focuses on the designing and performance validation of a two-tank THS based on molten salt to integrate with a 280 MW_th sodium cooled fast reactor. Designing of the THS includes the vital component, sodium-to-salt heat exchanger which is a technology gap that needs to be filled, and designing and parameter selection of the tanks and related pumps. Modeling of the designed THS is conducted followed by the description of operation strategies and control logics of the THS. Finally, the dynamic simulation of the designed THS is conducted based on Fortran. Results show, the proposed power system meets the need of the design requirements to store heat for 18 h during a day and provide 500 MW_th for peak demand for the rest of the day.