• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.11
• /
• pp.801-807
• /
• 2022

In this paper, we propose an ultra compact S-Band PCM/FM telemetry transmitter. The equipment is compact, so it can be applied to a limited space and capable of stable data transmission was designed and manufactured even with specifications set differently for each operating environment and system. RF direct conversion structure is used for the miniaturization of equipment, an RF transmission board, Power distribution board, and a signal processing board were implemented on a single PCB, so that the function of the transmitter could be performed with a minimum device. According to the target specification, variable output of 1~10W and variable data rate of 390kbps~12.5Mbps is possible in S-Band(2,200~2,400MHz) without degradation of performance. To verify the performance of the equipment, the RF performance test and BER measurement test were performed after the equipment was manufactured. It was confirmed that the OBW, null-to-null bandwidth, 1st IMD, Spurious emission, Phase noise specification of the PCM/FM modulated signal which is presented by the IRIG standard were satisfied, and we can confirm the data received using the transmitter inspection equipment were transmitted normally without distortion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1201-1208
• /
• 2022

In general, to maximize the supply and efficiency of floating offshore wind power generation energy, the motion caused by wave attenuation of the substructure must be reduced. According to previous studies, the motion response was reduced due to the vortex viscosity generated by the damping plate installed in the lower structure among the waves. In this study, a 5 MW semi-submersible OC5 platform and two platforms with attenuation plates were designed, and free decay experiments and numerical calculations were performed to confirm the effect of reducing motion due to vortex viscosity. As a result of the model test, when the heave free decay tests were conducted at drop heights of 30 mm, 40 mm, and 50 mm, compared with the OC5 platform, the platform with two types of damping plates attached had relatively improved motion damping performance. In the model test and numerical calculation results, the damping plate models, KSNU Plate 1 and KSNU Plate 2, were 1.1 times and 1.3 times lower than OC5, respectively, and the KSNU Plate 2 platform showed about two times better damping performance than OC5. This study shows that the area of the damping plate and the vortex viscosity are closely related to the damping rate of the heave motion.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.103-109
• /
• 2023

In this paper, we propose a smart wall switch based on IEEE 802.11b/g/n standard 2.4GHz band communication. As the 4th industrial era evolves, smart home solution development is actively underway, and application cases for smart wall switches are increasing. Most of the Chinese products that preoccupy the market through price competitiveness use Bluetooth and Zigbee communication switches. However, while ZigBee communication is low power, communication speed is slower than Bluetooth and network configuration through a separate hub is additionally required. The Bluetooth method has problems in that the communication range and speed are lower than Wi-Fi communication, the communication standby time is relatively long, and security is weak. In this study, an IEEE 802.11b/g/n smart wall switch applied with Wi-Fi communication technology was developed. In addition, through the two-wire structure, it is designed so that no additional cost is incurred through the construction of a separate neutral line in the building. The result of the study is more than 30% cheaper than the existing wall switch, so it is judged that it will be able to preoccupy the market not only in terms of technological competitiveness but also price competitiveness.

• Iberoamérica
• /
• v.21 no.2
• /
• pp.25-52
• /
• 2019

Esperpento denotes a literary style in Spanish literature first established by Spanish author Ramón María del Valle Inclán that uses distorted descriptions of reality in order to criticize society. And esperpento's narrative strategy is similar in many ways to Mikhail Bakhtin's carnivalism. Especially Valle Inclán's first esperpentic theatre, Luces de Bohemia contained various carnivalistic elements of Bakhtin. The various techniques of Valle Inclán's esperpento used in Luces de Bohemia can be explained by Bachchin's carnivalist techniques. Therefore, this paper aims to re-examine the esperpentic techniques in Luces de Bohemia of Valle Inclán in terms of Bakhchin's carnivalism. Because the esperpentic tecniques of this play pursue the subversion of power or authority through the carnivalistic aspects such as polyphony, subversion of seriousness, parody, grotesque realism, plaza, ambivalence, anomalous structure of space, time and plot, etc. Esperpento and carnivalism serve as a tool to interpret the social reality, beyond criticism and satire of Spanish society. The characters act passively on all the external factors that determine human destiny, rather than actively carving their own destiny like the classic heroes. Modern man cannot defy or control the external situation of the modern civilization. So they are tragic. In this situation, the protagonist of the tragedy who challenges reality disappears and a puppet figure like Max Estrella, the protagonist of the Luces de Bohemia, takes his place on a satirical level. This is the satire and the true meaning of carnivalistic humor that Valle Inclán tried in his play.

• The Journal of Korean-Japanese National Studies
• /
• no.21
• /
• pp.1-43
• /
• 2011

This article introduces Abe Mituie's activities related to Korean and Japanese Buddhism and two newly discovered materials. He worked as a brain of Japanese cultural rule over Joseon Korea while holding various positions such as the president of KyeongSung Il Bo, the vice president of Kokmin Newspaper and the director of Central Joseon Association. Abe was responsible for Enkak Temple, the head temple of Japanese Rinzai section, and was one of the layman followers of Syak Soen who worked for the spread of modern Japanese Buddhism to Europe and America. He was a respectful Buddhist layman so as to teach Zen Buddhism for young Buddhist monks in Japan. After he started to assume charge in the Kyeong Sung Il Bo, he was also very active in movements in relation to Joseon Buddhism to the extent that he was found to be deeply involved in Joseon Buddhism sections. On the other hand, he concluded Joseon culture to be 'devastated.' He asserted that it was necessary to develop spiritual culture and revive Buddhism in order to resolve the devastation in the Joseon. In addition, he thought that Joseon Buddhism was ruined due to the misgovernment of the Joseon Dynasty, but had its own as great tradition as Japanese Buddhism. Therefore, in his opinion, there was a need to do research on Joseon Buddhism and find some way out of the contemporary difficulties. In order to save the situation, he made efforts to protect and revive Joseon Buddhism while paying continuous visits to Joseon Buddhist temples, supporting the publication of Buddhist canons and proposing to have a regular meeting of 'The Invitation of 30 Head Temples.' From his visit to Youngju Temple and his consistent relationship with Kang Daeryeon, it can be assumed that he was involved in reorganizing power structure in Joseon Buddhism and establishing various institutions. He emphasized the strict adherence of individuals and communities to rules in his lecture for students at Jung Ang Hak Rim. It was a way to revive Joseon Buddhism by creating a new social image of Joseon Buddhism. He continued to work for the restoration of Joseon Buddhism even after he retired from Kyeong Sung Il Bo and returned to Japan. He introduced the originality of Joseon Buddhism history to Japan and sent Japanese monks to Korea in order to do research and contribute to exchange between Korean and Japanese Buddhism. All things taken together, it is evident that Abe Mitzihe regarded Joseon as backward or stagnant from a perspective of evolutionist or orientalist, and was a Japanese elite to believe that it was just for Japan to control Korea. However, he was different from other Japanese elites in that he did not considered Joseon Buddhism merely as the object of propagation. He thought that Joseon Buddhism possessed its own great tradition and culture, but was ruined because of the misadministration of the Joseon Royal House. Therefore, in his opinion, Joseon Buddhism should be recovered by means of some supports, and its revival would lead to the restoration of Joseon culture as a whole, which would be realized by Japanese rule over Korea and Japanese elites' generous assistance.

• Journal of the Daesoon Academy of Sciences
• /
• v.28
• /
• pp.243-265
• /
• 2017

In this research, I define 'conscience' in Daesoon thought as the 'Restorative capability of returning to one's roots.' The notion of conscience forms a structure of separation and return, and it is connected to the ascetic aim of realizing human perfection. The conscience opens up potential possibilities and leads realization of potential possibilities by returning to the the point of origin. In the middle of separation and return, the conscience acts as the power of subjectivity possessed by human beings which is known as 'In jon (Human Nobility)' in Daesoon thought. The concept of conscience in Daesoon thought is connected with the subjectivity of In jon and free will as well as the character of subjectivity. This shares commonalities with critical thinking, modern characteristics, and the subjectivity of Heidegger's existentialism. Heidegger describes human fate from an existentialist vantage point using terms such as dasein, Geworfenheit, and Entwurf, and establishes human existence as an act of self-recovery from within in a lonely existential establishment. Daesoon thought implies that humanity is the root of ultimate reality, and this description is in sharp contrast with the thrownness (Geworfenheit) of Heidegger's subjectivity. Therefore, Daesoon thought can be seen as unique in its characterization of humanity as being connected to the root of ultimate reality, autonomy, and independent existence.

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.1-25
• /
• 2022

This study was conducted for technology development and industrial and enterprise system design for the sustainable life of mankind. Human society is facing a crisis. As the power of mankind has increased due to the development of nuclear weapons and information and communication technologies, the risk of human society has greatly increased. The value of growth and freedom is increasing due to capitalism and democratic systems, so technological innovation is accelerating, and industries and companies are growing significantly. New technologies and industries can greatly develop human society and put it at risk. This study was conducted with the aim of redesigning technology, industry, and enterprise systems so that humans who live on Earth can be more sustainable for a longer time. It presented a practical alternative for a long-term sustainable human society. It suggested alternatives for what philosophy and methodology should be developed for the whole of humanity and in each individual national society, for developing technologies, fostering industries, and operating corporate systems. First of all, the problems of the technology development system, industrial system, and enterprise system of human society were analyzed. The characteristics and problems were analyzed in terms of sustainability of human society. The necessary and sufficient conditions for an alternative system to solve the raised problems were derived. A system that satisfies these conditions was designed and presented. The alternative system was named as a servicism system as a system based on the service philosophy. The structure, operation model, and implementation plan of the new technology industry enterprise system were presented. In the future, follow-up studies are needed to be concreted at the level of individual countries and human society as a whole.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.296-301
• /
• 2023

Solid oxide fuel cell has received more attention recently due to the fuel flexibility via internal reforming. Commonly used Ni/YSZ anode, however, can be easily deactivated by carbon coking in hydrocarbon fuels. The carbon deposition problem can minimize by developing alternative perovskite anode. This study is focused on improving conductivity and catalytic activity of the perovskite anode by introducing rGO (reduced graphene oxide). Sr_0.92Y_0.08TiO₃(SYT) anode with perovskite structure was synthesized with 1wt% of rGO. The presence of rGO during anode fabricating process and cell operation is confirmed through XPS and Raman analysis. The maximum power density of rGO/SYT anode improved to 3 times in H₂ and 6 times in CH₄ comparing to that of SYT anode due to the high electrical conductivity and good catalytic activity for CH₄.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.203-213
• /
• 2022

To understand an underlying geological structure via seismic imaging, the velocity information of the subsurface medium is crucial. Although the full-waveform inversion (FWI) method is considered useful for estimating subsurface velocity models, 3D FWI needs a lot-of computing power and time. Herein, we compare the calculation efficiency and accuracy of frequency-domain 2D and 3D acoustic FWIs. Thereafter, we demonstrate that the artifacts from 2D approximation can be partially suppressed via frequency-domain 2D FWI by employing diffraction angle filtering (DAF). By applying DAF, which employs only big reflection angle components, the impact of noise and out-of-plane reflections can be reduced. Additionally, it is anticipated that the DAF can create long-wavelength velocity structures for 3D FWI and migration.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.93-98
• /
• 2023

In this paper, an artificial neural network based on simulated annealing was constructed. The mapping relationship between the parameters of micro-scaled flow channels electrochemical machining and the channel shape was established by training the samples. The depth and width of micro-scaled flow channels electrochemical machining on stainless steel surface were predicted, and the flow channels experiment was carried out with pulse power supply in NaNO3 solution to verify the established network model. The results show that the depth and width of the channel predicted by the simulated annealing artificial neural network with "4-7-2" structure are very close to the experimental values, and the error is less than 5.3%. The predicted and experimental data show that the etching degree in the process of channels electrochemical machining is closely related to voltage and current density. When the voltage is less than 5V, a "small island" is formed in the channel; When the voltage is greater than 40V, the lateral etching of the channel is relatively large, and the "dam" between the channels disappears. When the voltage is 25V, the machining morphology of the channel is the best.