• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1113-1119
• /
• 2007

In this paper, first, we proposed various possible candidate schemes for determining initial sleep window size and varying sleep window size in sleep mode for power saving class I of IEEE 802.16e. Then, we analyzed and compared the power saving performances of those schemes. The schemes used for the comparisons are EICV of IEEE 802.16e, and other comparable schemes such as EIED, EILD, LIED and LILD. Experimental results show that LILD and EIED outperform other comparable schemes. Especially, EIED shows the better performances for the case of high traffic intensity environments, while LILD does for the low traffic intensity case.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.387-390
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit Incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.823-829
• /
• 2013

IEEE 802.16 standard specifies the broadband wireless access (BWA) system including sleep mode to minimize the power consumption by a mobile station (MS). This paper outlines the overall operation of sleep mode and proposes a method to improve the power saving efficiency of the IEEE 802.16 sleep mode. The proposed method not only decreases the number of bytes that a MS in sleep mode needs to receive during listening interval but allows to indicate a control-specific operation such as periodic ranging.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.1-6
• /
• 2019

In this paper, we have developed an app that can control IPTV - Miracast and the Internet with Android 7.0 on the embedded board. The app can be controlled by the remote control of IPTV and can receive TV when using IPTV. And Miracast and Embedded board are put into the power saving mode. When one mode is selected in this way, the other two modes enter the power saving mode and the power saving control technology is applied to reduce energy consumption. The board used in this paper was Android version 7.1.2 version of Raspberry pie 3B / B + and Asus Tinker board s, and Android Studio program was used to make the app and a synchronization control program was also developed to operate with IPTV remote control. The operation of the Android start program using the power saving power control technology and the remote control synchronization control program developed in this way is confirmed to be normal operation as a result of applying to the actual IPTV.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1854-1860
• /
• 2014

In this paper, the energy saving on mobile communication repeater is studied. DB(Dual Band) small repeater, which is currently used in the field for indoor coverage, is adopted as a test unit. For reducing the power consumption, PFC (Power Factor Correction) is included on SMPS (Switching Mode Power Supply) of the DB small repeater. The test results show that approximately 38.9% of the power consumption is reduced comparing with the repeater without PFC. It means that approximately 230.43kWh per unit can be saved annually.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.3
• /
• pp.24-30
• /
• 2015

Wi-Fi STAs in power saving mode described in the Wi-Fi specification can deteriorate the system performance such as throughput, time delay when they receive data frames from a Wi-Fi AP. This problem is caused by data frame reception failure due to the channel state, and it increases re-transmissions. In this paper, we propose a modified power saving mode considering fairness of Wi-Fi system in order to solve the problem. By simulation, we showed that data throughput can be increased without time delay degradation if the proposed method restricting the number of packet transmission attempts and HARQ are used.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.38-46
• /
• 2014

Wi-Fi STAs in power saving mode described in the Wi-Fi specification can deteriorate the system performance such as throughput, time delay when they receive data frames from a Wi-Fi AP. This problem is caused by data frame reception failure due to the channel state, and it increases re-transmissions. In this paper, we propose a modified power saving mode of Wi-Fi system in order to solve the problem. Also, we evaluate its performance in terms of throughput and time delay by simulation.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.365-371
• /
• 2017

IEEE 802.11 Wireless Local Area Network (WLAN) adopts Power Saving Mode(PSM) to save the power. Unlike existing PSM, this paper proposes a new scheme for the power saving of the Mobile Host(MH) when a MH performs the data transmission after the competition-based DCF(Distributed Coordination Function) and competition free-based PCF(Point Coordination Function). In this paper, The proposed scheme estimates the distance between the MH with the authority of data transmission and the Access Point(AP) and then adaptively controls the power of the MH considering the distance. Through the simulation result, we find that the proposed scheme consumes the smaller transmission power and has the similar success rate of packet transmission when it is compared to the existing scheme which uses the same power without the consideration of the distance.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.271-276
• /
• 2014

The life-time and performance of a wireless sensor network is closely related to energy-efficiency of sensor nodes. In this paper, to increase energy-efficiency, each sensor node operates in one of three operational modes which are normal, power-saving, and inactive. In normal mode sensor nodes sense and transmit data with normal period, whereas sensor nodes in power-saving mode have three-times longer period. In inactive mode, sensor nodes do not sense and transmit any data, which makes the energy consumption to be minimized. Plus, the proposed algorithm can avoid unnecessary energy consumption by preventing transmitting duplicate sensed data. We implemented and simulated the proposed algorithm using Tiny OS based ZigbeX platfom and NS-2, respectively. Performance evaluation results show that the proposed algorithm can prolong sensor networks' lifespan by efficiently reducing energy consumption and its standard deviation of all sensor nodes.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.774-777
• /
• 2005

In this paper, a constant frequency phase shifting PWM controlled voltage source full bridge-type series load resonant high-frequency inverter using the IGBT power modules is presented for innovative consumer electromagnetic induction heating applications such as a hot water producer, steamer and super heated steamer. The full bridge arm side link passive quasi-resonant capacitor snubbers in parallel with the each power semiconductor device and high frequency AC load side linked active edge inductive snubber-assisted series load resonant tank soft switching inverter with a constant frequency phase shifted PWM control scheme is discussed and evaluated on the basis of the simulation and experimental results. It is proved from a practical point of view that the series load resonant and edge resonant hybrid high-frequency soft switching PWM inverter topology, what is called class DE type. including the variable-power variable-frequency(VPVF) regulation function can expand zero voltage soft switching commutation range even under low output power setting ranges, which is more suitable and acceptable for induction heated dual packs fluid heater developed newly for consumer power utilizations. Furthermore, even in the lower output power regulation mode of this high-frequency load resonant tank high frequency inverter circuit it is verified that this inverter can achieve ZVS with the aid of the single auxiliary inductor snubber.