• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.103-109
• /
• 2003

기존의 Multiple-Subcarrier변조 방식에 4-차원(4-D)신호를 이용한 Optical Wireless통신 방식을 제안하였다. 4-D 신호는 신호파형 최적화 기술 (OSW, Optimization Technique of Signal Waveforms)을 이용하여 유도하고 Multiple-Subcarricr의 block coder에 적용함으로써 출력 신호점 간의 Euclidean distance를 최대화하였다. 그 결과 고정 dc 바이어스를 부가한 상태에서 시스템에서 요구되는 Normalized power를 QPSK에 비해 3 dB, Reserved Subcarrier 나 Minimum Power에 비해 최대 3.3 dB 를 각각 절감하였고 normalized bandwidth 1.125 ∼ 1.25의 범위에서 QPSK에 비해 평균 3 dB, Res. Subcarrier 방식에 비해 2 ∼ 4 dB, Min. Power 방식에 비해 0 ∼ 3 dB를 각각 절감하였다.

• Journal of Communications and Networks
• /
• 제12권2호
• /
• pp.158-167
• /
• 2010

The energy efficiency of wireless infrastructure and terminals has been drawing renewed attention of late, due to their significant environmental cost. Emerging green communication paradigms such as cognitive radios, are also imposing the additional requirement of flexibility. This dual requirement of energy efficiency and flexibility poses new design challenges for implementing radio functional blocks. This paper focuses on the area vs. power trade-offs for the type of channel filters that are required in the digital frontend of a flexible, energy-efficient radio. In traditional CMOS circuits, increased area was traded for reduced dynamic power consumption. With leakage power emerging as the dominant mode of power consumption in nanoscale CMOS, these trade-offs must be revisited due to the strong correlation between area and leakage power. The current work discusses how the increased timing slacks obtained by increasing the parallelism can be exploited for overall power reduction even in nanoscale circuits. In this context the paper introduces the notion of 'area efficiency' and a metric for evaluating it. The proposed metric has also been used to compare the area efficiencies of different classes of time-shared filters.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.648-653
• /
• 2018

Elimination of soluble boron from reactor design eliminates boron-induced reactivity accidents and leads to a more negative moderator temperature coefficient. However, a large negative moderator temperature coefficient can lead to large reactivity feedback that could allow the reactor to return to power when it cools down from hot full power to cold zero power. In soluble boron-free small modular reactor (SMR) design, only control rods are available to control such rapid core transient. The purpose of this study is to investigate whether an SMR would have enough control rod worth to compensate for large reactivity feedback. The investigation begins with classification of reactivity and completes an analysis of the reactivity balance in each reactor state for the SMR model. The control rod worth requirement obtained from the reactivity balance is a minimum control rod worth to maintain the reactor critical during the whole cycle. The minimum available rod worth must be larger than the control rod worth requirement to manipulate the reactor safely in each reactor state. It is found that the SMR does have enough control rod worth available during rapid transient to maintain the SMR at subcritical below k-effectives of 0.99 for both hot zero power and cold zero power.

• 해양환경안전학회지
• /
• 제16권1호
• /
• pp.107-113
• /
• 2010

국내 주요 무역항에서는 예선운영 및 업무처리요령에 근거하여 지방해양항만청장이 예선의 사용기준을 정하여 운영하고 있다. 그러나 예선의 사용기준 및 소요마력에 대한 산출 방식이 각 항만마다 상이하고, 일부 항만의 경우 예선 사용마력에 대한 사용척수와 총 사용마력이 달라 예선 운용에 혼선이 예상된다. 본 연구에서는 국내 주요 무역항의 예선 사용기준을 상호 비교하여 문제점을 도출하고, 예선의 총 소요마력 산출 근거를 기초로 선박규모별 예선 사용에 대한 일원화된 기준을 제안하였다. 또한, 현행 예선사용기준은 풍속이 10m/s 미만인 통상적인 경우에 해당되므로 갑작스런 돌풍 및 태풍 등으로 인한 재난대비 차원에서 그 이상의 풍속에 대한 기준도 제시하여 예선 운영세칙에 포함할 젓을 제안하였다.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.741-747
• /
• 2008

This paper proposes a new concept of IDSP(Intelligent Digital Switchgear Panel) which can solve the problem of the safety, the reliability and the convenience to correspond to the requirement of the general electric customer or electric power company under the ubiquitous-based home automation environments. By analyzing their requirement functions, a 32-bit micro processor is adopted as main controller to support the designed functions efficiently. The DSP-based single phase power management device is utilized to collect the electric power information and the ethernet convertor to communicate through internet among the IDSPs and the remote computer system. In the proposed IDSP, the several functions are implemented such as the earth leakage level display and waveform transmission, the electric fee display, the voltage management, the load management and the load control function. Finally, the prototype of the IDSP is made experimently based on the designed results, and then the effectiveness is verified by testing its basic functions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.256-258
• /
• 2005

EMU system is system that o(for target performance and function because various lower part system such as vehicles, signaling, power supply, rail track is consisted as complex. It is important first of all that describe correctly system requirement until configuration of system, design, manufacture, installation and test verification so that the complicated urban transit system is to act safety and reliable and to display target performance and function properly. The system requirement assist the system developer to comprehensive the performance and function of system in basic design. Therefore, In this paper wishes to study way to analyze system of system requirement and apply to Urban transit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.296-298
• /
• 2005

Urban transit is system that offer target Performance and function because various lower part system such as vehicles, signaling, power supply, rail track is consisted as complex. It is important first of all that describe correctly system requirement until configuration of system, design, manufacture, installation and test verification so that the complicated urban transit system is to act safety and reliable and to display target Performance and function properly. The system requirement assist the system developer to comprehensive the performance and function of system in basic design. Therefore, In this paper wishes to study way to analyze system of system requirement and apply to Urban transit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1206-1209
• /
• 1998

For 21th Century, the assignment of power distribution will be the expansion of equipments to supply electric power and harmony with its environment, in process of approving value consciousness of land, space, and the preservation of surroundings. This paper proposes a plan to match with the requirement about equipments, having ability to supply electric power, being harmonized itself with its surroundings by applying a general concept of "Amenity" when we choose an established form of power distribution.

• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.17-22
• /
• 2014

The design of a fuel cells stack is important to get optimal output power. This study focuses on the evaluation of fuel cell system for unmaned aerial vehicles (UAVs). Low temperature proton exchange membrane (LTPEM) fuel cells are the most promising energy source for the robot applications because of their unique advantages such as high energy density, cold startup, and quick response during operation. In this paper, a 600 W open cathode LTPEM fuel cell was tested to evaluate the performance and to determine optimal operating conditions. The open cathode design reduces the overall size of the system to meet the requirement for robotic application. The cruise power requirement of 600 W was supported entirely by the fuel cell while the additional power requirements during takeoff was extended using a battery. A peak of power of 900 W is possible for 10 mins with a lithium polymer (LiPo) battery. The system was evaluated under various load cycles as well as start-stop cycles. The system response from no load to full load meets the robot platform requirement. The total weigh of the stack was 2 kg, while the overall system, including the fuel processing system and battery, was 4 kg.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.223-227
• /
• 2013

Purpose: The objectives of this study were to develop a general purpose baler system that is appropriate for the domestic forage cultivation environment and operated by the medium size tractor for production of bale silage made of green forage crops, and to test its performance. Methods: In a first experiment, the time of formation per one bale and densities of bales that are produced from bale system, were measured. In a second experiment, power requirement was measured by a power measurement system manufactured during bale system work. Results: The power measurement system was constructed with strain-gage sensors to measure torque of a PTO axle and proximity sensor to measure rotating speed of a PTO axle. Thus, the power requirement was calculated by PTO torque and PTO rotating speed. For evaluation of bale quality, the samples of bales were analyzed for contents of moisture, ADF, NDF and TDN. Conclusions: If the results of this study will be utilized, the coefficient of utilization of agricultural machinery will be increased by the operation of a medium size tractor that is a major disseminated tractor in farm, and it will contribute tremendously to make a forage production base for livestock farms.