• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1737-1743
• /
• 2006

OCR(On channel repeater) provides the high frequency reuse efficiency for allocating frequency bands to repeaters because the frequency of input and output signals of OCRs is the same. However the oscillation probability of OCRs is high due to the same input and output frequency. In order to prevent a repeater from oscillating, we must keep the antenna isolation higher than the gain of the repeater with a some margin. In this paper we simulated the effects of the amplitude, phase and time delay of feedback signals (m the characteristics of non-regeneration OCR. Simulation results show that the highest probability of oscillation is occurred when the gain of a repeater is the same value of the isolation. From the simulation results, we know that the phase of feedback signals can be adjusted to reduce the possibility of oscillation if a non-regeneration repeater has a narrow operation bandwidth or a signal bandwidth is narrow. As the time delay increases, the probability of oscillation and the fluctuation of gain over a certain frequency band increase also. The effects of the amplitude and phase of feedback signals on S/N of 8-VSB signal for generation and non-generation repeater were tested. The measured results show that the set-top can receive 8-VSB signal when the received signal power is $17{\sim}18dB$ higher than the noise power. When the isolation is almost same as the gain of the repeater, then the set-top can not receive 8-VSB signals due to the oscillation of the repeater. And the phase of feedback signals affects S/N at the output of the repeater when the isolation is $11.75{\sim}13.75dB$ larger than the gain of the repeater. In this case the set-top can not receive 8-VSB signal of at $48^{\circ}\;and\;347^{\circ}$ of the phase of feedback signals. However the phase of feedback signals can not affect the S/N of 8-VSB signals of the generation repeater because of the demodulation and modulation process of the generation repenter. The set-top can not receive 8-VSB signals when the amplitude of feedback signals is $12.6{\sim}13.6dB$ larger than the wanted signal power at the input port of the repeater. It's because that the amplitude of feedback signals saturates the front end of the repeater.

• Korean journal of communication and information
• /
• v.41
• /
• pp.41-74
• /
• 2008

Based on the theory of news media's agenda-setting function, this study analyzed Korean public's most important problems (MIP) and the degree of public consensus on the importance of those MIP's. The analysis was done in terms of both time and social strata. According to the findings, economy, social welfare, and political issues were in the for tier of the MIP list. The analysis of issue diversity (H-statistic) also demonstrated a relatively high degree of agenda consensus among Korean public despite some fluctuation in the consensus level, which appears to be higher than that among the American public. A decrease in the degree of agenda consensus with the passage of time appealed to be a general phenomenon across diverse social strata. However, the degrees of consensus-building were different in light of education, socioeconomic status, and the size of residential area. Those who are more educated, have more economic power, and live in a larger city had more chances to experience agenda consensus. These results seem to be basically attributable to the presumed positive relationship between these demographic variables and media exposure. The different degrees of public consensus according to the different levels of those demographic variables suggest that a closer investigation into the various influences on the importance of public issues among the respondents should be done in future studies.

• The Journal of Engineering Geology
• /
• v.23 no.2
• /
• pp.105-115
• /
• 2013

Increasing the river cross-section by barrage construction causes rises in the average river water levels and discharge rates in the rainy season. The time series patterns for groundwater levels measured at 23 riverside monitoring wells along the lower Nakdong River are compared for two cases: before and after water-filling at the Changnyeong-Haman Barrage. Monthly average groundwater levels indicate a distinct increase in groundwater levels in the upstream riverside close to the barrage. River-water level management by barrage gate control in August, during the rainy season, resulted in a 0.1 m decrease in groundwater levels, while water-filling at the barrage in December caused a 1.3 m increase in groundwater levels. The results of hierarchical cluster analysis indicate that seven groundwater monitoring wells and river water levels were in the same group before barrage construction, but that this number increased to 14 after barrage construction. Principal component analysis revealed that the explanation power of two principal components corresponding to river fluctuation, PC1 and PC2, was approximately 82% before barrage construction but decreased to 45% after construction. This finding indicates that the effect of the river level component that contributes to change in groundwater level, decreases after barrage construction; consequently, other factors, including groundwater pumping, become more important. Continuous surveying and monitoring is essential for understanding change in the hydrological environment. Water policy that takes groundwater-surface water interaction into consideration should be established for riverside areas.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.2
• /
• pp.116-121
• /
• 1999

Tree leaves have been used as the passive sampler to measure lipophilic PAHs in the atmosphere. This is a convenient and economical method in case of sampling at many regions including the remote places that are not supplied with electric power. But poor results can be obtained if samples are collected carelessly or PAHs concentrations are calculated on the basis of wrong natures of tree leaves. This study was performed to avoid the errors of interpretation that can be induced by these problems when tree leaves are used as a passive sampler of PAHs. Conclusions have been reached as follows: 1) The correlativity was low among the water content, the lipid content, the dry weight and the area of four kinds of tree leaves. According to this, PAHs concentrations calculated per wet weight, dry weight, lipid content and area of tree leaves differed. Therefore, same unit shoud be used to describe concentrations of the pollutants when PAHs concentrations deposited on leaves from atmosphere in the different regions are compared. It is better to decribe the unit as PAHs concentrations per dry weight of leaves for comparison with other data because almost researcher make use of this unit, and the range of fluctuation of the dry weights in several natures of tree leaves was relatively little during growing seasons. 2) Although four kinds of trees(Pinus Koraiensis, Ginkgo biloba, Evodia daniellii, Kalopanax pictus) had been grown at the same place, PAHs concentrtions deposited on leaves differed respectively. Therefore PAHs concentrations deposited on different kinds of tree leaves should not be compared. It is better to make use of pine needles as the sample because pine trees grow almost over the world, and it is able to collect their samples in winter.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.259-265
• /
• 2016

The present study aims to design and utilize a model test system of a Caisson in wet towing condition, to assess towing stability of a 9,300 ton class caisson. The suggested towing system was designed to provide regular tension on the towline, whereas the previous model test system towed the model in constant speed. The new model test system was expected to reproduce the towing condition more realistically than the test system with constant speed condition, as the tugboat in actual towing condition tows the towline with constant power. Model tests were conducted in a towing tank with 1/30 scaled model. In the model tests, six-degrees-of-freedom motion of the caisson model and tension on the towline were measured and analyzed. By using the new system, fluctuation of the motion of model and tension on the towline decreased. The variation in the draft and initial trim was applied in the model tests. In the initial trim condition, the motion and towing force decreased.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.1
• /
• pp.75-84
• /
• 1999

Although many studies on modelling of port competitive situation have been conducted, both theoretical frame and methodology are still very weak. In this study, therefore, a new algorithm called ESD (Extensional System Dynamics) for the evaluation of port competition was presented, and applied to simulate port systems in northeast asia. The detailed objectives of this paper are to develop Unit fort Model by using SD(System Dynamics) method; to develop Competitive Port Model by ESD method; to perform sensitivity analysis by altering parameters, and to propose port development strategies. For these the algorithm for the evaluation of part's competition was developed in two steps. Firstly, SD method was adopted to develop the Unit Port models, and secondly HFP(Hierarchical Fuzzy Process) method was introduced to expand previous SD method. The proposed models were then developed and applied to the five ports - Pusan, Kobe, Yokohama, Kaoshiung, Keelung - with real data on each ports, and several findings were derived. Firstly, the extraction of factors for Unit Port was accomplished by consultation of experts such as research worker, professor, research fellows related to harbor, and expert group, and finally, five factor groups - location, facility, service, cargo volumes, and port charge - were obtained. Secondly, system's structure consisting of feedback loop was found easily by location of representative and detailed factors on keyword network of STGB map. Using these keyword network, feedback loop was found. Thirdly, for the target year of 2003, the simulation for Pusan port revealed that liner's number would be increased from 829 ships to 1,450 ships and container cargo volumes increased from 4.56 million TEU to 7.74 million TEU. It also revealed that because of increased liners and container cargo volumes, length of berth should be expanded from 2,162m to 4,729m. This berth expansion was resulted in the decrease of congested ship's number from 97 to 11. It was also found that port's charge had a fluctuation. Results of simulation for Kobe, Yokohama, Kaoshiung, Keelung in northeast asia were also acquired. Finally, the inter port competition models developed by ESB method were used to simulate container cargo volumes for Pusan port. The results revealed that under competitive situation container cargo volume was smaller than non-competitive situation, which means Pusan port is lack of competitive power to other ports. Developed models in this study were then applied to estimate change of container cargo volumes in competitive relation by altering several parameters. And, the results were found to be very helpful for port mangers who are in charge of planning of port development.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.423-430
• /
• 1994

We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit. Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and - 3 dB small signal response of more than 2.6 GHz. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of - 30.2 dBm was obtained through 47 km optical fiber transmission under the criterion of $1\times10^{-10}$ BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber. fiber.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.446-451
• /
• 2020

Flow induced vibration in a heat exchanger may cause damage to piping. The purpose of this study was to compare the characteristics of vortex shedding behavior through the circular tube banks at several tube locations, No.1, No. 10, and No. 19, with respect to time when the flow velocity of the inlet is constantly and periodically fluctuating.(60) The time characteristics of lift and the PSD characteristics were also investigated. In the case of periodic inlet flow velocity, strong vortex occurred at some time and after that time, a weak vortex was generated through the tube banks simultaneously. In the case of constant inlet flow velocity, the lift fluctuating frequency was 37.25Hz and that at the No. 19 tube was 18.63Hz and near 50Hz. In the case of periodic inlet flow velocity, the lift fluctuating frequency was 37.25Hz and 18.63Hz. The lift fluctuating frequency at No. 19 tube was observed broadly from 20Hz and 50Hz.

• Asia pacific journal of information systems
• /
• v.21 no.2
• /
• pp.59-87
• /
• 2011

These days, firms are focusing on the improvement of relationships with business partners. The supply chain integrations are taking critical role in improving the relationships with business partners. In accordance with the development of the IT technology, it became possible for firms not only to integrate inner parts of the organization, but also to integrate the company with other organizations in the supply chain. Therefore, in e-Biz environments, it is imperative for firms to strengthen the core capacity through the supply chain, and to precisely determine the components of the determinants of e-Business integration which impact the firm performance. This study analyzed determinants that have impacts on e-business integration in e-business capacity perspectives in competitive environments. This study based on the premise that the resources and capacities that Grant(1991) and Hart(1995) emphasized do not directly influence the corporate performance. This study focused on the fact that corporate must create core competencies based on these capacities to establish competitive edge. Therefore, this study model analyzed to find out which e-Biz competencies are needed to integrate e-Biz according to competitive environment elements. This study designed to empirically analyze the impact of the e-Biz competencies to the e-Biz integration and to the corporate performance. Independent variables of this study-IT management, partner management, e-Biz knowledge, e-Biz establishment and proliferation, process innovation-are selected based on precedent studies on e-Biz competencies. We selected intermediate variables to verify that e-Biz competencies do not have direct impact on the corporate performance, but have impact on the e-Biz integration, which is intermediate effect. That is to verify that if the components of supply chain improve the integration level using e-Biz competencies, the overall supply chain performances will improve. Dependent variables are selected to verify that e-Biz integration has impacts on corporate performances. This study used factor analysis, path analysis, moderating effect analysis as statistical tests. First, we used exploratory factor analysis and confirmatory factor analysis to analyze reliability and validity. Because e-Biz competencies are presented variously by preceding studies, we used SPSS16.0 to verify if survey questionnaire used by theoretical backgrounds is properly composed. Second, we tested the property of structure model by AMOS. We did path analysis using AMOS16.0 to test structure that is composed of e-Biz competencies and e-Biz integration. Last, we tested moderating effects of measure factors. We analyzed 163 domestic companies to find out many significant suggestive points. First, relationship improvement capacity, e-business knowledge sharing capacity with business partners, and process innovation capacity are adopted as determinants of differentiation and competitive edges against competing firms. Second, e-business knowledge sharing capacity, and process innovation capacity are analyzed as the determinants of e-business integration in the firm which demand fluctuation in the market is high. On the other hand, among the determinants that require capturing ideas on new products, and strengthening the technological power, process innovation capacity are adopted as the determinants. These results provide us the foundation that the determinants that we have analyzed can impact the supply chain integration strategies which take into account the competitive environments.

• Journal of Internet Computing and Services
• /
• v.19 no.3
• /
• pp.49-56
• /
• 2018

Euclidean distance (ED) between error distribution and Dirac delta function has been used as an efficient performance criterion in impulsive noise environmentsdue to the outlier-cutting effect of Gaussian kernel for error signal. The gradient of ED for its minimization has two components; $A_k$ for kernel function of error pairs and the other $B_k$ for kernel function of errors. In this paper, it is analyzed that the first component is to govern gathering close together error samples, and the other one $B_k$ is to conduct error-sample concentration on zero. Based upon this analysis, it is proposed to normalize $A_k$ and $B_k$ with power of inputs which are modified by kernelled error pairs or errors for the purpose of reinforcing their roles of narrowing error-gap and drawing error samples to zero. Through comparison of fluctuation of steady state MSE and value of minimum MSE in the results of simulation of multipath equalization under impulsive noise, their roles and efficiency of the proposed normalization method are verified.