• 한국전자파학회논문지
• /
• 제24권11호
• /
• pp.1081-1090
• /
• 2013

본 논문에서는 C-대역에서 입출력 정합 회로가 패키지에 내장된 10 W급 내부 정합 증폭기 설계 및 제작을 하였다. 전력증폭기 설계에 사용한 트랜지스터로 GaAs pHEMT bare-chip을 사용하였다. 트랜지스터 패드 위치와 커패시터 크기를 고려한 와이어 본딩 해석으로 정확도 높은 설계를 하였다. 패키지와 정합 회로를 함께 EM simulation하여 패키지가 정합 회로에 미치는 영향을 해석하였다. 2-tone 측정 시 memory effect로 인해 발생되는 IMD3의 비대칭성을 줄이기 위한 memory effect 감쇄 바이어스 회로를 제안 및 설계하였다. 측정 결과, 7.1~7.8 GHz 대역에서 $P_{1dB}$는 39.8~40.4 dBm, 전력 이득은 9.7~10.4 dB, 효율은 33.4~38.0 %을 얻었고, 제안된 memory effect 감쇄 바이어스 회로로 IMD3(Upper)와 IMD3(Lower)차는 0.76 dB 이하를 얻었다.

• International journal of advanced smart convergence
• /
• 제12권2호
• /
• pp.182-186
• /
• 2023

In this study, we measured the power and temperature of the floating horizontal solar cell in a coastal lagoon and compared with those of ground solar cell and water platform solar cell. Because the bottom surface of the floating horizontal solar cell was contacting the water, cooling effect was expected stronger than other cells. As a result of the measurement, the power of floating horizontal cell was 11.7% higher than that of the ground cell and 15% higher than that of the water platform cell. During the measurement, it was observed that water waves were continuously flowed on the top surface of floating horizontal cell by the wind, and it could be assumed that the cooling effect occurred not only on the bottom surface of the cell but also on the top surface. In order to analyze the cooling effect and power increasing of the horizontal cell in the wave situation, we measured power and temperature of the cell while generating artificial waves in a laboratory equipped with Zenon lamp as a solar simulator. At the height of thewater surface, the power of the cell with waves was 3.7% higherthan without waves and temperature was 4.6℃ lower. At 1 cm and 2 cm below the watersurface, power of the cell with waves was decreased by 14% and 11% than without waves while temperature was same . At 3 cm below the water surface, there was no effect of waves.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1280-1285
• /
• 2011

Recently, due to the use of fossil fuels for electric power production, carbon emissions increased excessively. Thereby, in order to replace fossil fuels, many studies about fossil fuels such as solar and fuel cell energy source are progressing. Fuel cell system has high energy conversion efficiency. Also, fuel cell system is environmentally friendly system because the carbon emission is almost not occur. Therefore, the fuel cell system is considered as the core technology of in the fields of the future energy and environmental. Fuel cell system has an effect on distribution power system because another power source of other than large power plants. So, fuel cell system can be degradation reason of power quality in the power system. In this paper, we constructed the system for an assessment on harmonics effect. The system is composed with power source, harmonics generation and linear load, fuel cell system. we also performed assessment on harmonics effect in customer and the distributed power system during grid connection of residential fuel cell system. An assessment cases are divided into three. A Case 1 is state that residential load and fuel system are connected to grid, Case 2 is state that residential load and harmonics load are connected to grid, and Case 3 is state that all loads are connected to grid. As a output of fuel cell system is increase, analysis results based on assessment system showed that power quality became more aggravation as effect of harmonics.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.285-287
• /
• 2008

This paper represents the electric power load leveling effect of the Light Control System(LCS). The lighting of typical mid-large commercial buildings is the major factor of daytime electric power consumption. Since the national peak power demand occurs in between 11:00 and 16:00, the dimming control of light can contribute the decrease of the power demand We will discuss the load leveling effect of dimming control with LCS.

• 유통과학연구
• /
• 제11권2호
• /
• pp.23-33
• /
• 2013

Purpose - Numerous studies have tried to assess the role of a warranty as an explanatory instrument for product quality. While one study argued that manufacturers signal their superior quality to consumers by extending the duration of a warranty, quality is not necessarily related to warranty and a warranty for a short duration is a sign of high product quality. However, there are limitations to measuring product quality in terms of a single variable such as a warranty. Some other studies have evaluated the influence of brand power or value and price on the supposed quality of a product while the influence of warranty was found to be insignificant. Research design, data, methodology - The study analyzes the influence of brand power and the country of origin effect on consumers' perception of product quality in line with warranty and establishes a priority strategy. Especially, consumer experience has a significant influence on state of the art technology products like applied home electronics as these goods are generally quite expensive and consumers expend significant energy in purchasing them, so the associated warranty and brand can have a critical role in the decision making process. The price of the product was excluded in this discussion as it continually varies with the market share of the product. Results - The results of the analysis are as follows: First, each of the factors such as the standard of the warranty, brand power, and country of origin effect influences the degree of satisfaction of an individual. Second, the factors brand power and quality of the warranty interact both complementarily and synergistically at a time, depending on the brand power. As brand power is more significant, the degree of satisfaction is greater in case of products with low quality warranty compared to those with high quality warranty. Third, the brand power and country of origin effect present a complementary interaction. Fourth, the country of origin effect and quality of a warranty interact synergistically. Conclusions - Thus, the higher the quality of warranty, greater is the increment in the degree of satisfaction. The comprehensive study on the effect of the country of origin on the purchase decision process and the degree of satisfaction compared to the other elements shows that in case of Japanese and Korean markets the brand power of a company is desirable in sustaining the quality of warranty to the industrial average. Also, there is no significant improvement in the perceived quality of the product when the quality of the warranty is lowered. Therefore, the warranty effect diminishes when the value of the brand is known, while it perishes when both the brand power and the country of origin effect are strong enough.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.371-380
• /
• 2008

This paper describes the Utility Interactive PV (UIPV) system which can improve the peak-cut effect by adding an energy storage device of batteries to the power converter. The proposed system has three possible operation modes depending on relative condition of PV output, which can have the power shaping function covering the peak power for 3 hours. A new power circuit and an application algorithm have been applied to the UIPV system which is based on working PV system during a 3-hour peak time. The energy relationship by the proposed system is analyzed theoretically and experimentally. The proposed system is evaluated at the viewpoint of cost and total spacing, which enables the proposed UIPV system to have the reduction of the peak power demand and hence to improve the power capacity of peak cut.

• 복식문화연구
• /
• 제24권5호
• /
• pp.600-616
• /
• 2016

The purpose of this study was to investigate the effects of power blog self-presentation and on-line shopping mall reviews on the word of mouth (WOM) effect and apparel purchasing behavior. Consumers living in Seoul and Gyeonggi received questionnaires. There were 303 usable forms that could be analyzed by descriptive statistics, factor analysis, Cronbach's alpha, and regression analysis. The results were as follows: There was a significant effect of power blog self-presentation such as interactivity, media effect, and business intention on information acceptance through WOM. Power blog self-presentation, such as interactivity and business intention, affect information delivery by WOM significantly. There was a significant effect of review consideration, such as agreement, usefulness, enjoyment, and purity, on information acceptance of WOM. Reviews describing enjoyment, purity, and usefulness affect information delivery of WOM significantly. Business intention, media effect, and purity directly affect apparel-purchasing behavior, and affect the WOM effect as a mediator variable and then purchasing behavior. Whereas, interactivity, overstatement, and enjoyment affect the WOM effect as a mediator variable, and then affect overall purchasing behavior. Therefore, fashion firms consider active interaction with power blog visitors and promote the way of enjoying with fun through review of apparel on-line shopping mall when they try to implement viral marketing with WOM effect.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1377-1382
• /
• 2015

Power system restoration following a massive blackout starts with re-energizing Primary Restorative Transmission (PRT) systems at first. As power systems have been gradually enlarged and become more complex, periodical evaluation and reassignment of PRTs are needed. So far it has been decided by try and error approach by corresponding human experts to analyze and evaluate them. This paper presents an intelligent system that finds optimal primary restoration paths using analytic and heuristic knowledge from PSS/E data, and suggests an optimal PRTs depending on the condition of Ferranti effect or a reactive power capability margin of black-start generator. This system was tested in Korea Electric Power system, and showed a promising result.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.471-482
• /
• 1996

In this paper, we analyze the effect of imperfect power control on the capacity of the reverse channel in CDMA cellular system with antenna arrays in the base station. For imperfect power control, we assume that the received power at the base station from the users within each cell has log-normal distribution, and we also consider the effect of imperfect power control of co-channel interferences which arise from both its own cell and outer cells. From the result of numerical analysis, we show that the degree of power control gives a great influence on the capacity of CDMA celluar system with antenna arrays, and also that antenna arrays at the base station can improve greatly the system capacity even when the power control is imperfect.

• 한국프랜차이즈경영연구
• /
• 제11권3호
• /
• pp.19-26
• /
• 2020

Purpose: The old axion to put the customers first (e.g., customers are king, customers are always right) has been taken for granted in the service sector. In addition, many companies in South Korea are providing customer-first education for employees at their contact points to strengthen their competitiveness. However, excessive increase in the psychological power of the customer can lead to a problem of abuse of power, called 'Gap-jil.' Despite these concerns, most companies hardly discard policies to give high priority to customers because of the assumption that it enhances customer satisfaction leading to organizational performance. However, in recent years, some franchise catering companies have posted warnings about the abuse of power by customers, and a movement to pursue a power-balancing between service providers and their customers is spreading. Research design, data, and methodology: This research is conducted to reconsider the principle of the customer-first perspective and to create a basis for arguments that can solve the problem of abuse of power, which is recognized as a serious social problem. In this research, we test and analyze the effect of customers' psychological power in the context of a restaurant on expectation for service and response to service failure. Result: The result of an experimental study shows that the effect of psychological power on customer satisfaction can be somewhat negative. Also, customers with high psychological power are more likely to have high service expectations. Especially high psychological power of customers causes a difference in the expectation level of human factors such as employee attitude, while the difference in expectations of non-human factors such as restaurant atmosphere was not statistically significant. In addition, when customers with high psychological power encounter service failure situation, they are more likely to feel disappointment and regret with a service provider. Meanwhile, the effect of psychological power on complaining behaviors are not significant. Conclusions: The findings of this research provide meaningful implications that the service providers should reconsider their existing corporate culture and management policies that put customers first. In addition, the result of this research is provided meaningful opportunities to review the management philosophy for the company's customers and the education philosophy for the employee education.