• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.806-813
• /
• 2014

Planar electromagnetic interference (EMI) filters are widely used to restrain the conducted EMI of switching power supplies. Such filters are characterized by small size, low parasitic parameters, and better high-frequency performance than the passive discrete EMI filter. However, EMI filter performance cannot be exactly predicted by using existing methods. Therefore, this paper proposes a method to use scattering parameters (S-parameters) for the measurement of EMI filter performance. A planar EMI filter sample is established. From this sample, the relationship between S-parameters and insertion gain (IG) of EMI filter is derived. To determine the IG under different impedances, the EMI filter is theoretically calculated and practically measured. The differential structure of the near-field coupling model is also deduced, and the IG is calculated under standard impedance conditions. The calculated results and actual measurements are compared to verify the feasibility of the theory.

• 산업기술연구
• /
• 제34권
• /
• pp.71-78
• /
• 2014

Recently, using the electronic devices was increased with semiconductor developments. So, the EMI(Electromagnetic interference) problem become to important issue for coexistence with each electronic devices. The EMI is caused by switching operation from the power switches as the FET and the transistor in power conversion devices. In this paper, the hybrid EMI filter that composed with active components and passive components was described. The EMI filter is applied to the 160 watts LED driver experimentally verify the performance. The hybrid EMI filter is compared with non-filter, only passive filter and only active filter. The proposed EMI filter attenuated CM noise more than traditional passive filter.

• 전력전자학회논문지
• /
• 제14권6호
• /
• pp.440-448
• /
• 2009

설비용 전원선 EMI 필터(Facility power-line EMI filter)는 컴퓨터 센터와 같이 전자기적인 노이즈에 민감한 장비를 가진 배전 설비로 유입되는 EMI를 차단하기 위해 사용된다. 따라서 전류용량이 크며 특정한 응용분야에서는 MIL-STD 220 기준으로 14kHz~10GHz의 광대역에서 최고 100dB 이상의 삽입 손실(Insertion loss)이 요구된다. 이러한 요구조건을 만족하기 위해서는 광대역의 주파수에서 커패시터, 인덕터 등의 특성 분석과 고차 LC 필터 (High order LC filter) 설계기술이 필요하다. 본 논문에서는 이러한 광대역 설비용 전원선 EMI 필터의 설계에 대하여 기술하였다. 먼저, EMI 필터 설계를 위한 필터의 특징과 구조, 필터의 설계 과정, 필터 설계 방법 등에 대한 연구를 수행하였다. 그리고 필터 구성의 기본 소자인 커패시터와 인덕터의 특성에 대해 분석하였다. 최종적으로 광대역 설비용 전원선 EMI 필터를 설계 및 제작하여 실험을 수행하였으며, 실험 결과의 비교 분석을 통해 연구 결과를 검증하였다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1200-1208
• /
• 2016

Planar electromagnetic interference (EMI) filter has significant engineering significance to power electronic system integration and miniaturization. However, the value of differential mode capacitance cannot meet the demand of noise suppression because of the size limit of ceramics. In this case, the EMI filter of novel multilayers is recommended to address this issue. A novel integrated structure of EMI filter based on multilayer ceramic is proposed in this study. The inductance and capacitance of the new structure can be designed separately, which is an advantage in manufacturing. Insertion loss is measured more closely to the actual situation in this study, which is different from the condition where source and load impedances are both 50 Ω. In the process of designing a novel EMI filter, noise impedance is considered. Moreover, the prototype is created and applied to a small switching power supply, which verifies the effectiveness of the developed EMI filter.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.632-642
• /
• 2012

This paper presents a filter analysis of conducted Electro-Magnetic Interference (EMI) in switching power converters (SPC) based on noise impedances. The EMI characteristics of SPC can be analytically deduced from a circuit theoretical viewpoint. The analytical noise model is investigated to get a full understanding of the EMI mechanism. It is shown that with suitable and justified model, filters pertinent to EMI noise is investigated. The EMI noise is identified by time domain measurements associated with an isolated half-bridge ac-dc converter. Practical filters like LC filter, ${\pi}$ filter and complete EMI filters are investigated. The proposed analysis and results can provide a guideline for improving the effectiveness of filtering schemes in SPC. Experimental results are also included to verify the validity of the proposed method. The results obtained satisfy the Federal Communications Commission (FCC) class A and class B regulations.

• 전력전자학회논문지
• /
• 제9권1호
• /
• pp.81-87
• /
• 2004

본 논문에서는 세탁기, 에어컨과 같은 가전기기에 사용되는 인버터 구동 교류 전동기 구동 시스템의 EMI 특성해석 및 필터 설계 방법에 대하여 기술하였다. 먼저, 인버터 구동 교류 전동기 구동 시스템의 전도성 EMI 발생 및 전달 메커니즘에 대하여 분석하였고, 공통 및 차동모드 노이즈 분리 기법을 이용한 EMI 필터의 설계 방법을 제시하였다. 제시된 방법의 타당성을 검증하기 위해 PWM 인버터로 구동되는 유도 전동기 구동 시스템에 대한 실험을 수행하였고 EN55014 EMI 기준을 만족하는 결과를 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1576_1576
• /
• 2009

We present the design of an EMI filter to mitigate the electrical noise from the power supply over a broadband of a few tens of KHz to 18GHz. Admitting that our approach is not apart from the standard technology of EMI filter, it is worth checking out how we can implement the filter that meets the challenging spec. on band of operation. The function of the EMI filter is well-depicted by its performance on the CE(Conducted Emission) and RE(Radiated Emission) suppression through tests which convince us of its application to power supplies of land, water and flying vehicles.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1236-1243
• /
• 2016

This paper presents the analysis and design of an active electromagnetic interference (EMI) filter (AEF) for the common-mode (CM) noise reduction of switching power converters. The features of the several types of AEFs are discussed and compared in terms of implementation. The feed-forward AEF with a voltage-sensing and voltage-cancellation (VSVC) structure is implemented for an LLC resonant converter to replace a multiple-stage passive EMI filter and thereby reduce CM noise. The characteristics and performance of the VSVC-type AEF are investigated through theoretical and experimental works.

• 전력전자학회논문지
• /
• 제9권3호
• /
• pp.260-266
• /
• 2004

EMI필터는 주로 시행착오 법에 의해서 설계하기 때문에, 전력변환기기의 전도 EMI를 감쇠시키기 위해서는 많은 시간을 요하게 된다. 따라서 본 논문에서는 이러한 문제를 극복하기 위해서 EMI 필터에 대한 새로운 분석적인 설계절차를 제안한다. 각 부품에 대한 고주파 모델을 구성하고, 이러한 모델링 회로를 이용하여 각 모드에 적용할 수 있는 필터를 설계한다. 실제 사용되는 부품에 대한 축적된 데이터 베이스와 표준필터를 적용한 EUT(Equipment Under Test)의 측정 데이터를 기초로 해서 필터를 설계하는 알고리즘을 제안한다. 끝으로, 측정결과를 통해서 제안된 모델과 설계방법의 타당성을 확인한다.

• 한국시뮬레이션학회논문지
• /
• 제10권4호
• /
• pp.21-30
• /
• 2001

In this paper, EMI measurement, the STGU simulation being conducted, filter design, its characteristics, and its implementation to the PCB, and finally test results are discussed. When the low pass filter was implemented within the STGU, the power of EMI decreased more than 20dBm. Finally, when TE and MTIE, two important quality measure in synchronous reference clock, was assessed, ITU-T G813 requirement was satisfied. EMI(Electromagnetic Interface) is a measure of electomagnetic radiation from equipment in the range of 10KHz to 3GHz, and can cause unexpected reactions of electronics/electrical equipment. In this study, for safe and stable communication operation, a STGU (System Timing Generation Unit), which is a 2.5G SDH System and a major EMI source, was employed to simulate electromagnetic interface. Using Open-Site test, the power of fundamental frequency of EMI of interest and its harmonics were measured. Also, a low pass filter at cut-off frequency of 2GHz was specifically designed for this study to minimize the effect of EMI between electronic components.