• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.505-507
• /
• 1995

Applications of the fiber optic sensing are glowing rapidly, particularly in situations where size, weight, speed, and immunity to electromagnetic interference are important considerations. The fiber optic current sensors have been developed for low frequency(60Hz) metering in electric power systems. But we try measure to high frequency large current by fiber optic current sensor based on Bi substituted rare earth iron garnet. In this paper, we report the linearity to 500 amperes and frequency response of signal processor and a result of detection the standard impulse large current of fiber optic impulse sensor system.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.768-773
• /
• 1998

The speed control of SRM(Switched Reluctance Motor) needs the accurate position and speed data of rotor. This information is generally provided by a shaft encoder or resolver. In some cases, the environment is which the motor operates may cause difficulties in maintaining the satisfactory position detection performance. Therefore, the elimination of the position and speed sensor has gained wide attention. In this paper, a new algorithm for estimation of rotor position and speed is described for the SRM drives. This method uses is nonlinear adaptive observer using the MRAS(Model Reference Adaptive System). The observer is proved by Lyapunov Stability Theory. This algorithm was implemented with a TMS320C31 DSP. Experiment results prove that the observer is able to estimate the speed and position with a little errors.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.604-605
• /
• 2010

산업이 고도화 됨에 따라 박막 코팅에 대한 수요가 점차 증가하고 있으며 이에 따라 플라즈마를 이용한 마그네트론 스퍼터 시스템에 대한 수요 역시 증가하고 있다. 코팅 공정에서 가장 문제가 되는 것은 고압의 플라즈마 발생장치를 사용함으로써 야기되는 아크현상이라 할 수 있다. 따라서, 플라즈마 전원 장치의 핵심 기능 중의 하나는 아크 차단 성능이라 할 수 있으며 가능한 한 최소의 아크 에너지를 유지할 필요가 있다. 아크를 억제하는 방법은 최단 기간 내에 아크를 검지하여 출력을 차단함으로써 아크 발생에 필요한 에너지의 유입을 감소시키는 방법이 사용되고 있다. 본 연구에서는 아크를 검지하는 기존의 방식을 살펴보고 최단기간에 아크를 검지할 수 있는 새로운 형태의 검지 방식을 제안한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.455-455
• /
• 2000

A novel pulse-width-modulated (PWM) function is introduced for precise position measurement in an enclosed signal field. An amplitude modulation was used to light the LEDs for the conventional study. However, the transform properties from the driving signal to the lighting intensities of the LEDs are non-linear, and accurate control of the lighting power was necessary. Therefore, a lighting function independent of these properties is desired. Well-known PWM functions are used to construct the enclosed signal field by simulation, and the precision of the phase detecting system is analyzed. A novel "axial symmetry PWM" function is found to be effective for orthogonal pahse detection.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.217-226
• /
• 1997

This study was to develop a machine vision system to detect and to discriminate 5 kinds of apple surface defectbruise, decay. fleck, worm hole and scar. To detect the defects from an image of apple, thresholding technique was applied to images on various frames (R, G, B, H, S and I) of the color machine vision and an image of near infrared (NIR). To discriminate the detected region of defect, various features of the 5 kind defect regions were extracted from the 4 kinds of images selected above. The features were size of area, roundness, axes length ratio, mean and valiance of pixel values, standard deviation of real part of amplitude spectrum in frequency domain obtained by Fourier transform of pixel data and mean and standard deviation of power spectrum obtained by the same transform of pixel data. Routines to discriminate the defects from the features of image were developed and tested to prove their validity. The test resulted that I-frame and NIR images were the most desirable. Accuracies of the two images to discriminate the defects were noted as 76% and 77%, respectively.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.84-86
• /
• 2001

본 연구에서는 플랜트의 계측신호로 부터 특징 패턴 파형들을 감지하고 패턴감지 정보로부터 플랜트의 운전상황 및 고장을 알아내도록 하는 새로운 기법을 제시하고, 이러한 기법의 실현에 필요한 신호처리 기초 연구를 수행하였다. 또한 보령화력 1.2호기 500MW급 드럼형 보일러및 제어 시스템을 대상으로 보일러 플랜트의 dynamics 모델링과 운전 시뮬레이션을 통하여 여러 운전 패턴및 고장 상황을 발생시켜 고장감지 앨고리즘들의 개발 및 시험과정에 적용하였다. 본 연구에서 수행한 보일러 및 보일러 제어계통에 대한 모델링 및 시뮬레이션은 실제 수행한 발전소 시험 데이터와 비교할 때 높은 일치도를 보이는 결과를 보였다.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2066-2068
• /
• 1999

In this paper, an optical fiber sensor(OF sensor) utilizing the principal of Sagnac interferometer was proposed to detect the discharge signals which generated from needle-sphere electrode system in insulating oil. The performance of OF sensor was checked by sinusoidal calibration signal generated by PZT acuator at 198kHz. The detected discharge signals consisted of acoustic signal and the electrical noise. The noise signal could be removed by digital low pass filter. It was demonstrated that the OF sensor in this research had a possibility to detect the discharge signals in power apparatus.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.271-274
• /
• 2003

This paper presents a Built-in Current Sensor that detect defects in CMOS integrated circuits using the current testing technique. This scheme employs a cross-coupled connected PMOS transistors, it is used as a current comparator. Our proposed scheme is a negligible impart on the performance of the circuit undo. test (CUT). In addition, in the normal mode of the CUT not dissipation extra power, high speed detection time and applicable deep submicron process. The validity and effectiveness are verified through the HSPICE simulation on circuits with defects. The entire area of the test chip is $116{\times}65{\mu}m^2$. The BICS occupies only $41{\times}17{\mu}m^2$ of area in the test chip. The area overhead of a BICS versus the entire chip is about 9.2%. The chip was fabricated with Hynix $0.35{\mu}m$ 2-poly 4-metal N-well CMOS technology.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.278-279
• /
• 2018

Due to the frequent occurrence of dangerous wild animals in rural or mountainous areas. it has been increasing damage of crops in every year. Fight bell or electric fence is typically installed to chase those wild animals. But there are problems that it is impossible to drive out birds and spends high installation and maintenance cost. In addition, it is inefficient to the risk of electric shock effect. In this study, the proposed system can drive out hazardous wildlife and birds regardless of installation location through realtime detection with the multi-sensing based IoT platform technology. This study showed a very large significance effect that can reduce crop damage by wildlife and birds.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.5
• /
• pp.393-397
• /
• 2005

When a real-time image processing application is implemented with a general-purpose computer, CPU (Central Processing Unit) is usually heavily loaded and in many cases that CPU alone cannot meet the real-time requirement at all. Most modern computers are equipped with powerful Graphics Processing Units (GPUs) to accelerate graphics operations. There is a trend that the power of GPU outgrows that of CPU. If we take advantage of the powerful GPU for more general operations other than pure graphics operations, the processing time can be reduced. In this study, we will present techniques that apply GPU to general operations such as image processing procedures. Our experiment results show that significant speed-up can be achieved by using GPU.