• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2007

Since data caches used in modern embedded processors consume significant fraction of total processor power up to 40%, embedded processors need power-efficient high performance data caches. This paper proposes a prefetching data cache structure which pursuing low power consumption. We added tag history table on existing data cache structure which includes hardware unit for data prefetching so that reduce the number of parallel lookup on tag memory. This strategic cache structure remarkably reduces power consumption for parallel tag lookup. Experimental results show that the proposed cache architecture induce low power consumption while maintain the same cache performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.811-820
• /
• 2006

In this paper, The correlation of the power consumption of sensor node is analyzed according to the analyze parameter in IEEE 802.15.4 star sensor network. And It is studied the influence on analysis parameter. The power consumption of sensor network in transmission process and average transmission power consumption drives to numerical formula. And CSEM WiseNET system measurement value is used. As a simulation result, The power consumption of sensor node in star network consist of 10 sensor nodes is more than 20 % that in single network in average. When beacon signal interval is 0.1 second in all frequency bands, the power consumption of sensor node in up-link is more than 2.5 times that in down-link in average. When beacon signal interval is 1 second and the number of sensor nodes increases to 100 and sensing data increases to 100 byte, the power consumption of sensor node increases to 2.3 times. And The superior performance of 2.4 GHz frequency band has than 868/915 MHz frequency band up to $6{\sim}12$ times.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.19 no.4
• /
• pp.8-17
• /
• 2023

The air temperature is gradually increasing owing to global warming, especially in summer, therefore, the performance of an air source heat pump (ASHP) is expected to be decreased. Accordingly, the performance gap between the ASHP and ground source heat pump (GSHP) should be increased, however, the quantitative comparison has not been yet investigated. In this study, impact of global warming on the performance of the ASHP and GSHP is investigated based on the climate data for 1930, 1980, and 2030. The coefficient of performance (COP) as well as annual power consumption of the ASHP and GSHP are compared and analyzed. In the case of COP, the COP of GSHP hardly changes over the years owing to the constant ground temperature, while that of ASHP decreases by 3.7% for cooling and increases by 0.71% for heating. In the case of annual power consumption, the cooling and heating power consumption of GSHP increases by 12.69% and decreases by 15.58%, respectively, over the year owing to the changes in heating and cooling loads. As for the ASHP, the cooling and heating power consumption increases by 16.64% and decreases by 17.8%, respectively. For a more accurate comparison, power consumption ratio is introduced and shows that total annual power consumption of the GSHP to ASHP decreased from 68% in 1930 to 65% in 2030. Therefore, as global warming accelerates, the effect of reducing power consumption by using GSHP compared to ASHP is expected to be increasing.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.44-47
• /
• 2011

In this paper, we propose context-aware based on Low Power Sensing Algorithm. The proposed sensing algorithm reduces power consumptions using low-power sensing algorithms and low-power sensing protocols. Experimental results show that the average power consumption of the proposed method is up to half consumption that of the conventional method.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.164-173
• /
• 2007

In this paper, we present a time-triggered mechanism for providing energy consumption profiles in the level of C functions. The similar mechanisms have already been introduced at the previous researches such as PowerScope and ePRO. Instead, we, in this paper, introduce our efforts to extend these researches to incorporate power domains and DVS(Dynamic Voltage Scaling), then to provide GUI-based tool as a plug-in to ESTO which is an IDE for Embedded S/W development based on Eclipse. From our experimental results, we could conclude that our approach worked and produced consistent energy consumption profiles on the DVS-applied program codes, and also displayed function level and time domain power consumption information with diverse presentation skills such as tables, phi-chart, bar-chart, 2-D graphs, consequently, is expected to provide more ease-to-use and productive IDE for lower power embedded S/W developers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1026-1029
• /
• 2009

Efficient Power consumption is important in sensor networks because charging of deployed sensor nodes is too difficult. So this paper focused on Modified-CBPER reduces energy consumption by reducing CBPER's data announcement ragne, and propose an algorithm to reduce power consumption by additional reduction of data announcement range. Proposed EM-CBPER(Enhanced Modified CBPER) somewhat increases power consumption of data request and data forwarding but it reduces total power consumption by reducing data announcement transmission of account for large quantity on total packet transmission.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.115-116
• /
• 2009

Home-network gateway always powered on, while network data is not transferred. And the Power consumption of networked electric devices are greatly increased, to support higher speed data transfer. To reduce the power consumption of networked electric devices, some ideas were proposed. Such as ALR, Proxying, Subset-PHY. In this paper we propose a scheme to reduce power consumption of Home-Network Gateway. Proposed Home-network Gateway architecture consumes less than 1W in passive standby mode.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.349-352
• /
• 2002

In this Paper, we introduced 32 bit SOC implementation for multi-application Smart Card and described the methodology for reducing power consumption. It consists of ARMTTDMI micro-processor, 192 KBytes EEPROM, 16 KB SRAM, crypto processors and card reader interface based on AMBA bus system. We used Synopsys Power Compiler to estimate and optimize power consumption. Experimental results show that we can reduce Power consumption up to 62 % without increasing the chip area.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.155-158
• /
• 2005

An invesitigation on power consumption of a mobile multimedia system using OFDM and MDVS technique is reported here. Analysis and simulation are performed to find the significances of proposed Microscopic Dynamic Voltage Scaling(MDVS) tehnique[4] on digital processor in terms of power saving. A study is also made to show power reduction in mobile multimedia system by incorporating OFDM modulation scheme in RF front-end. Finally, overall power consumption by functionally distinguished blocks ie. RF front-end, digital processor and human interface unit is shown here. Total power consumption is 8.2W for 2Mbps SD-quality WCDMA multimedia video service - the power consumption of digital processor is 3.9W(48%), the power consumption of RF front-end is 3.2W (36%), and the power consumption of interface is 1.8W(16%). Power saving of applying purposed MDVS technique is 35% in digital processor, and power saving of OFDM technique is 10-12dB in RF front-end.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.766-772
• /
• 1999

With the increase of portable system and high-density IC, power consumption of VLSI circuits is very important factor in design process. Power estimation is required in order to estimate the power consumption. A simple and correct solution of power estimation is to use circuit simulation. But it is very time consuming and inefficient way. Probabilistic method has been proposed to overcome this problem. Transition density using probability was an efficient method to estimate power consumption using BDD and Boolean difference. But it is difficult to build the BDD and compute complex Boolean difference. In this paper, we proposed Propowest. Propowest is building a digraph of circuit, and easy and fast in computing transition density by using modified COP algorithm. Propowest provides an efficient way for power estimation.