• 의정연구
• /
• 제23권1호
• /
• pp.151-185
• /
• 2017

서울의 '원전하나 줄이기(2012)' 정책은 성공적인 도시 에너지 정책이자, 에너지 전환(energy transition)의 성공사례로 소개되고 있다. 하지만, 본 정책의 이른바 '목표달성'이 어떻게 가능했는지에 대해서는 구체적으로 설명된 바가 없다. 본 연구는 원전하나 줄이기 정책의 높은 수준의 성과가 가능한 이유로, 정책인식, 정책목표, 정책수단 및 정책평가 등의 체계 구성요인 간의 조화를 유지할 수 있었던 서울시의 거버넌스 역량을 핵심 요인으로 제시하였다. 이러한 거버넌스 관점의 설명은 정책의 장(policy arena)으로서의 도시의 중요성을 부각시키고, 도시정부의 역량에 따라 체계의 전반적인 전환 과정에서 내적 일관성을 유지하며 정책체계로서의 항상성과 지속성을 유지할 수 있음을 보여준다. 경성에너지체계로 정의되는 합리성-효율성-중앙집권적 에너지체계는 원전하나 줄이기 정책의 시행과 더불어 연성에너지체계로 이행되기 시작하였다. 에너지체계 운영의 주체로서, 체계전환을 관리하는 서울시의 역량은 따라서 가장 중요한 설명변수가 된다.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.878-882
• /
• 2016

These days, SFCLs are being developed in order to limit fault current. However, the superconducting elements that limit the fault current have such problems as capacity increase and require auxiliary devices including cooling device. If devices that comprise the current power network can withstand fault current for at least one cycle, it is possible to limit the fault current with current limiting elements by bypassing it on the fault line. In this study, the fault current limiter was configured with current transformer, vacuum interrupter, and current limiting element. Through the experience, it was confirmed that the fault current was limited within one cycle. The superconducting element, as a current limiting element, limited the fault current by 80 % within one cycle from fault occurrence, and the passive element limited it more than 95 %. Also, through the comparison between resistance curve and power consumption curve, it was confirmed that the current limiting element using a passive element was more stable than the superconducting element that required capacity increase and other auxiliary devices. It was considered that the FCL proposed in this study could limit fault current stably within one cycle from fault occurrence by using the existing power technologies such as fault current detection and solenoid valve operating circuit.

• International Journal of Advanced Culture Technology
• /
• 제4권1호
• /
• pp.1-9
• /
• 2016

The demand for energy in Thailand has been continually increasing as the economic and social country grows. Approximately 60% of Thailand's primary energy is imported, mostly petroleum products. In 2008 Thailand's total energy consumption was 80,971 ktoe and the net price of energy imported was up to 1,161 billion Baht which is equivalent to 12.8% of GDP at the current price. The energy consumption or energy demand has been growing at an annual compounded growth rate of 6.42% and the peak electric power demand and electricity consumption was recorded at 22,568 MW and 148,264 GWh and grew at a rate of 7.0% and 7.5% per annum during the period from 1989 to 2008. The gross agriculture production in 2008 was recorded at 135.4 Mt which represents agriculture residue for energy at 65.73 Mt, which is equivalent to energy potential of about 561.64 PJ or 13,292 ktoe an increase in average of 5.59% and 5.44% per year respectively. The agricultural residues can converted to 15,600 GWh/year or 1,780 MW of power capacity. So, if government sector plan to install small biomass gasification for electricity generation 200 kW for Community. The residue agricultural is available for 8,900 plants nationwide. The small biomass power generation for electricity generation not only to reduce the energy imports, it also makes the job and income for people in rural areas as well. This paper's aim is to report the energy situation in Thailand and has studied 5 main agricultural products with high residue energy potential namely sugarcane, paddy, oil palm, cassava, and maize appropriate for small electricity production. These agricultural products can be found planted in many rural areas throughout Thailand. Finally, discuss the situation, methods and policies which the government uses to promote small private power producers supplying electricity into the grid.

• 정보과학회 논문지
• /
• 제42권12호
• /
• pp.1623-1628
• /
• 2015

모바일 기기의 성능은 점진적으로 증가하여 멀티코어를 사용하는 고성능의 CPU를 장착한 스마트폰이 일상화 되었다. 그러나 고성능 기기가 사용하는 전력의 소모량을 배터리의 용량이 따라가지 못하므로 전력 관리를 위한 성능 제어가 필수적이 되었다. 이에 DVFS와 같은 Linux 기반의 전력 관리 방안이 연구되고 있으나, 동적으로 자원 요구량의 변화가 심하고 사용자의 입력이 불규칙적인 모바일 기기의 특성으로 인한 한계가 존재한다. 본 연구에서는 DVFS와 같은 기존 Linux 기반의 전력 관리 방안이 웹페이지 로딩에 있어 부족한 점을 보완하여 사용자 반응성을 유지하면서 전력 소모를 줄이는 방법으로 네트워크를 통해 연산에 필요한 데이터를 받을 때까지 CPU의 동작 Frequency을 제한하는 방안을 제안하였다. 또한, 어플리케이션 수준에서의 구현을 통하여 웹페이지 로딩 시의 전력 소모가 감소함을 확인하였다.

• Architectural research
• /
• 제17권3호
• /
• pp.109-115
• /
• 2015

The dynamic pricing of electricity, where the electricity rate increases in a time zone with a high demand for electricity is typically applied to a building whose power reception capacity is greater than a certain size. This includes the time of use(TOU) electricity pricing in Korea which can induce the effect of reducing the power demand of a building. Meanwhile, a VRF (Variable Refrigerant Flow) system that uses electricity is regarded as one of the typical heating and cooling systems along with central air conditioning (central HVAC) for its easy operation and application to the building. Thus, to reduce power energy and operating costs of a building in which the TOU and VRF systems are applied simultaneously, we suggested a control for changing the indoor temperature setting within the thermal comfort range or limiting the rotational speed of an inverter compressor. In this study, to describe the features of the above-mentioned control and verify its effects, we evaluated the results obtained from the analysis of its operation data. Through the actual measurements in winter operations for 73 days since mid- December 2014, we confirmed a reduction of 10.9% in power energy consumption and 12.2% in operating costs by the new control. Also, a reduction of 13.3% in power energy consumption was identified through a regression analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.239-241
• /
• 2010

Performance evaluation for an air conditioning system is conducted at a specified test conditions. One is low temperature and the other is high temperature condition. Most of the manufactures tried to improve the performance at higher outdoor temperature. One of the reasons is that the customer wants to get ore capacity at high temperature climate. To cope with these kinds of demand, manufactures are tried to achieve higher capacity at high temperature with minimum power consumption even with same size of the system. Consequently, previous studies on performance of the air conditioning system are focused on capacity and performance improvement at high outdoor temperature.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 추계 총회 및 학술발표회
• /
• pp.74-79
• /
• 1995

In the last 10 years, membrane science and technology in Korea have grown fast in terms of basic research and process applications. Even the first large commercial membrane plant in Korea was an ion-exchange membrane process built in 1975 for the production of table salt with an annual capacity of 150,000 tons of salt, membrane processes could not draw general interests from industry not until 1987 when a reverse osmosis plant for the production of process water with a capacity of 10,000 m$^3$/day was built by Kugdong Petroleum Co. Today, the production of water by RO over the capacity of 140,000 m$^3$/day is in operation or under construction in Korea. Consumption of ultra pure water increases sharply in recent years mainly due to the rapid expansion of semiconductor industry and the introduction of ultra high pressure boilers for power plants.

• 정보처리학회논문지C
• /
• 제15C권4호
• /
• pp.303-310
• /
• 2008

ad-hoc네트워크에서 네트워크의 생존시간을 연장하기 위해서는 네트워크 트래픽 부하를 전체 네트워크에 골고루 분산시켜 노드당 평균 에너지 소모율을 균일하게 유지할 수 있어야만 한다. 본 논문에서는 노드의 에너지 잔량 및 사용 빈도 등을 고려해 경로를 설정하는 수정 AODV 프로토콜을 제안하였다. 또한 경로 재설정 과정에서 생성되는 엄청난 양의 AODV 제어 메시지 발생으로 인한 에너지 소모를 줄이기 위해 출발지 노드의 버퍼에 다중 경로 정보를 저장하도록 하였다. 링크 단절 시 경로 재설정 과정 전에 경로 테이블에 저장된 경로 정보를 활용할 수 있도록 하였다. 본 논문에서 제안한 알고리즘의 성능 평가를 위해 기존 AODV 및 에너지 기반 라우팅 프로토콜인 MMBCR방식과 전체 노드의 에너지 잔량, 네트워크 생존시간 및 데이터 패킷 수신율 등 3가지 평가 항목을 사용해 비교하였다.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.137-142
• /
• 2021

The Internet of Things (IoT) paradigm is at the forefront of present and future research activities. The huge amount of sensing data from IoT devices needing to be processed is increasing dramatically in volume, variety, and velocity. In response, cloud computing was involved in handling the challenges of collecting, storing, and processing jobs. The fog computing technology is a model that is used to support cloud computing by implementing pre-processing jobs close to the end-user for realizing low latency, less power consumption in the cloud side, and high scalability. However, it may be that some resources in fog computing networks are not suitable for some kind of jobs, or the number of requests increases outside capacity. So, it is more efficient to decrease sending jobs to the cloud. Hence some other fog resources are idle, and it is better to be federated rather than forwarding them to the cloud server. Obviously, this issue affects the performance of the fog environment when dealing with big data applications or applications that are sensitive to time processing. This research aims to build a fog topology job scheduling (FTJS) to schedule the incoming jobs which are generated from the IoT devices and discover all available fog nodes with their capabilities. Also, the fog topology job placement algorithm is introduced to deploy jobs into appropriate resources in the network effectively. Finally, by comparing our result with the state-of-art first come first serve (FCFS) scheduling technique, the overall execution time is reduced significantly by approximately 20%, the energy consumption in the cloud side is reduced by 18%.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.30-35
• /
• 2010

Recently, the large capacity draft fans in power plants had been changed to variable speed type to educe the power consumption. But the fan experienced the unexpected vibration at specific speed regions. In this study, the high vibration frequency of the fan was confirmed and the natural frequency of the rotor were measured and analyzed by FEM programs. It was analyzed that the vibration was caused by the resonance at the frequency, 30.7Hz. So, the rotor vibration characteristic was changed by adjusting the distance between the shaft bearings. It was conformed the high vibration was disappeared over the all operation speeds.