• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.495-497
• /
• 2001

Ullung wind power plant is a remarkable event to get a great concern of many people, because it has been observed as a first case of combining the new large different generating sources, i. e. hybrid diesel-wind power system. This paper is dealing with the analysis of this problem and with the grid-coordination. The first endeavor of actual measurement was performed at site during October 18-21. 2000 and a part of this records is presented in this paper.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.184-192
• /
• 1998

In this paper, we present a nonlinear feedback linearization-full order observer/sliding mode controller (NFL-FOO/SMC), to obtain smmoth control as a linearized controller in a linear system (or to cancel the nonlinearity in a nonlinear system), and to solve the problem of the unmeasurable state variables as in the conventional SMC. The proposed controller is obtained by combining the nonlinear feedback linearization-sliding mode control (NFL-SMC) with the full order observer (FOO)and eliminates the need to measure all the state variables in the traditional SMC. The proposed controller is applied to the nonlinear power system stabilizer (PSS) for damping oscillations in a power system. The effectiveness of the proposed controller is verified by the nonlinear time-domain simulations in case of a 3-cycle line-to-ground fault and in case of the parameter variation for the AVR gain K\ulcorner and for the inertia moment M.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.523-528
• /
• 2015

A new algorithm for a coordinative control method is proposed with respect to voltage control and system stabilization of local substations. This is accomplished using control cooperation between a static synchronous compensator (STATCOM) and the existing voltage compensation equipment in the steady state and emergency state of a power system. A real-time system analysis was developed by combining a system analysis program with InTouch, which has primarily been used in factory automation for verification. PSS/E was used for the load flow calculation software, Python for language, Intouch as an HMI program, and MS SQL for the database. To test this system, the system in the vicinity of the Migeum and the Migeum substations was modeled and simulated.

• 대한전기학회논문지
• /
• 제43권7호
• /
• pp.1169-1177
• /
• 1994

The function estimation characteristics of neural networks can be used sensor signal estimation of the nuclear power plants. In case of applying the neural network to the signal estimation of redundant sensors, it is an important problem that the redundant sensor signals used as the input signals of neural network should be validated. In this paper, we simplify the conventional parity space method in order to input the validated signal to the neural network and lso propose the sensor signal validation method, which estimates the reliable sensor output combining the neural network with the simplified parity space method. The acceptability of the proposed process variable estimation method is demonstrated by using the simulation data in safety injection accident of the nuclear power plant.

• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.47-52
• /
• 2015

The transient phenomenon of self-powered energy-harvesting is assessed using a bond-graph method. The bond-graph is an energy-based approach to describing physical-dynamic systems. It shows power flow graphically, which helps us understand the behavior of complicated systems in simple terms. Because energy-harvesting involves conversion of power in mechanical form to the electrical one, the bond-graph is a good tool to analyze this power flow. Although the bond-graph method can be used to calculate the dynamics of combining mechanical and electrical systems simultaneously, it has not been used for harvesting analysis. We demonstrate the usability and versatility of bond-graph for not only steady analysis but also transient analysis of harvesting.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.288-298
• /
• 2016

Proactive relay selection in cognitive radio networks has recently received considerable attention. However, its outage probability analysis is limited to partially-identical fading distributions, uncorrelation among received signal-to-noise ratios (SNRs), and no direct channel. This paper completes this literature deficiency by generalizing the existing analysis for non-identical fading distributions, correlation among received SNRs, and with direct channel. Numerous results demonstrate that relay selection with a direct channel achieves a higher diversity order and superior performance than that without a direct channel at virtually no cost of power and bandwidth. Further, proactive relay selection suffers an error floor at either a large maximum transmit power or large maximum interference power; however, the error floor level can be significantly remedied with an increase in the number of relays.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.500-508
• /
• 2011

In the distribution systems, the maximum power transportation capacity is restricted within 40MW based on two lines, because of the thermal current limit of a distribution line. Recently it has been continuously required to expand the abilities of the power transportation in distribution systems, as the number of large scale industrial complexes and distributed generations are growing. In this paper, we suggested the five alternatives combining two methods, laying the two bundle lines and adding another voltage between the 22.9kV and 154kV in distribution systems. This paper implemented the economic evaluations of proposed alternatives from national and customer perspectives. And then we compare the results with those of 154kV transmission system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.215-218
• /
• 2001

This paper is proposed a sinusoidal input current multi-level ac-dc converter using transformer. The multi-level converter which controls input current by combining Buck converter to Improve input current characteristics. This method, which is multiplying and duplicating output of converter of equal capacity, is able to control unit power factor of input current, reduce the problem caused by high frequency switching, and apply to high power converter because filter is not necessary The feasibility of the circuit is verified by computer simulation using PSIM

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.146-147
• /
• 2014

This paper presents an operation of the modular multilevel converter-high voltage direct current (MMC-HVDC) system as a Statcom to support the grid voltage. The advantage of the MMC-HVDC system is that it can control the active and reactive powers independently. The proposed control scheme will be designed by combining this performance and the control method of the Statcom. The grid voltage is regulated by the control of the reactive power, meanwhile the active power is controlled according to its applications. The simulation results based on the PSCAD/EMTDC simulation program will evaluate the effectiveness of the control scheme.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.232-233
• /
• 2012

This paper presents an effective control scheme for an electric vehicle battery charger where a symmetrical bridgeless power factor-corrected converter and a buck converter are cascaded. Both converters have been popular in industries because of their high efficiency, low cost, and compact size, hence combining these converters makes the overall battery charging system strongly efficient. Moreover, this charger topology can operate at universal input voltage and attain a desired battery current and voltage without ripple. In order to achieve a unity input power factor and zero input current harmonic distortion, the proposed control scheme adopts duty ratio feed-forward control technique in both current and voltage control loop. Additionally, in the current loop, its reference is created by a phase-locked loop (PLL) block, leading to a pure sinusoidal input current although the input voltage waveform is being distorted. The feasibility and practical value of the proposed approach are verified by simulation and experiment with an 110V/60Hz ac line input and 1.5kW-72V dc output of the battery charging system.