• Preventive Nutrition and Food Science
• /
• v.16 no.2
• /
• pp.104-109
• /
• 2011

Recently, we have demonstrated that green tea extract (GTE) decreases the intestinal absorption of benzo[a]pyrene (BAP), which is an extremely lipophilic food contaminant. The present study was conducted to examine if an enteral infusion of GTE would influence the biliary secretion of BAP and lipids in rats. Female rats were fed an AIN-93G diet with or without (control) GTE at 5 g/kg diet for 4 week. Following the 4-week dietary treatment, rats with bile duct cannula were infused continuously for 8 hr at 3.0 mL/hr via a duodenal catheter with a lipid emulsion containing $4.0\;{\mu}mol$ BAP labeled with $^{14}C$ ($^{14}C$-BAP), $20.7\;{\mu}mol$ cholesterol, $452\;{\mu}mol$ triolein, and $3.1\;{\mu}mol$ ${\alpha}$-tocopherol, and $396.0\;{\mu}mol$ Na-taurocholate with or without 76.1 mg GTE powder in PBS buffer (pH, 6.4). Bile was collected hourly via bile cannula for an 8 hr period. Our results showed that bile flow did not differ between groups. However, the biliary secretion of $^{14}C$-BAP was significantly enhanced by GTE infusion, compared with those infused with the lipid emulsion alone. However, GTE did not affect the biliary outputs of cholesterol, fat, phospholipid and ${\alpha}$-tocopherol. These findings indicate that GTE has a profound stimulatory effect on the biliary excretion of BAP in rats, without affecting other biliary lipids. The mechanism(s) by which GTE enhances the biliary secretion of BAP remains to be investigated.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.49-54
• /
• 2018

In the Active Pharmaceutical Ingredient(API) manufacturing company, since the product is produced by the chemical reaction, fire and explosion are frequently occurred in the process of inputting the raw powder as the chemical reaction stage. There are not many studies on safety measures through analysis of cause of accident in the actual chemical reaction stage. In this study, we investigated the heat flow in the boron removal reaction process to investigate the risk in the chemical reaction stage. The study reaction process was performed by using the reaction calorimeter for the products synthesized at the actual raw material in pharmaceutical factory. The risk was estimated by comparing the maximum temperature of the synthesis reaction, which can generate heat due to the failure of cooling in the actual manufacturing process, and the technical temperature. These results are applied to commercial manufacturing sites and safety measures to control the risk of runaway reaction due to reaction heat are suggested.

• Environmental Engineering Research
• /
• v.21 no.3
• /
• pp.291-296
• /
• 2016

Application of photocatalytic nanoparticles has been recently gaining an increased attention as air purifying material for sustainable urban development. The present work reports the photocatalytic removal of gaseous phase nitrogen oxides ($NO_x$) using $TiO_2$-coated zeolite to be applied as a filter media for the urban green infrastructure such as raingardens. The $TiO_2$-coated zeolite was synthesized by simple wet chemistry method and tested in a continuous-flow photo-reactor for its removal efficiency of $NO_x$ under different conditions of the weight percentage of $TiO_2$ coated on the zeolite, and gas retention time. The removal efficiency of $NO_x$ in general increased as the weight percentage of $TiO_2$ coated on the zeolite increased up to 15-20%. Greater than 90% of $NO_x$ was removed at a retention time of one minute using the $TiO_2$-coated zeolite ($TiO_2$ weight percentage = 20%). Overall, $TiO_2$-coated zeolite showed greater efficiency of $NO_x$ removal compared to $TiO_2$ powder probably by providing additional reaction sites from the porous structure of zeolite. It was presumed that the degradation of $NO_x$ is attributed to both the physical adsorption and photocatalytic oxidation that could simultaneously occur at the catalyst surface.

• Journal of Forest and Environmental Science
• /
• v.23 no.1
• /
• pp.51-55
• /
• 2007

The effect of ratio between chemical activating agent and raw material in the preparation of activated carbons from wood has been studied. Pinus koraiensis wood and zinc chloride ($ZnCl_2$) were used for materials in this study. Mixtures of wood and zinc chloride were heated under nitrogen flow in the temperature ranging from room-temperature to $600^{\circ}C$ for 1 hr using thermogravimetric technique. During heat treatment, activated carbons with various pore size and specific surface properties were obtained. The maximum BET surface area and total pore volume were $1468m^2/g$ and 1.74 cc/g, respectively, at the mixture ratio of 1 (wood powder) to 5 ($ZnCl_2$). It can be concluded that the differences in the properties of the activated carbons were related significantly with the ratio of chemical activating regent.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.747-752
• /
• 1993

A curd yogurt was prepared from milk added with skim milk powder or four kinds of starch such as rice starch, wheat starch, corn starch and potato starch. The effects of starch addition at 2%(w/v) level on acid production by lactic acid bacteria in milk was investigated. The effects of starch addition on quality of curd yogurt in terms of apparent viscosity, sensory property and volatile aroma compounds were also examined. Addition of starch markedly stimulated the acid production by lactic acid bacteria. Among four organisms tested, Lactobacillus jugurti produced the highest amount of acid. Apparent viscosity of curd yogurt added with starch was significantly higher than that of control. Curd yogurt fermented with L. jugurti showed pseudoplastic and thixotropic characteristics. Sensory property of curd yogurt added with corn starch or rice starch was evaluated as slightly better than reference sample, but that with potato starch was evaluated as the worst among all samples. Acetaldehyde, acetone, ethanol and butanol were detected by gas chromatographic analysis.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.29 no.4
• /
• pp.114-130
• /
• 2016

Objectives : This study is performed to investigate the therapy on tinnitus through the literature of Eastern and Western medicine. Methods : This study review the definition, etiology, classification, internal and external methods of treatment of tinnitus based on 50 articles of Eastern medicine, 16 articles of Western medicine about the treatment of tinnitus. Results : The results were as follows. 1. In Eastern medicine, the cause and mechanism of disease of tinnitus arose from the state of qi-blood deficiency, internal dampness-heat and depression stagnation. In Western medicine, there are mainly caused by damage to the auditory system the lower induced changes in the upper. 2. In Eastern medicine, differentiation of syndromes classifies clinical aspects, and cause and mechanism of disease. In Western medicine, it divides into an generating region, clinical and associated symptoms aspects. 3. In Eastern medicine, internal method of treatments of tinnitus are divided into four treatments. In Western medicine, internal methods of tinnitus are vasodilators, blood-flow improvers, Metabolism improvers etc. 4. In Eastern medicine, external method of treatments of tinnitus are paste preparation method, powder preparation method, pill preparation method, acupuncture & moxibustion method. In Western medicine, external method of treatments of Tinnitus are divided into injection, other surgical therapies and adjuvant therapy. Conclusions : Until now, there is no perfect, effective single treatment. We think that Eastern medicine approach and treatment can be helpful to overcome the limitations of tinnitus cure.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.74-78
• /
• 2002

Zinc Air battery obtain their energy density advantage over the other batteries by utilizing ambient oxygen as the cathode materials, and reusing cathode as recycled form. And specific capacity of zinc powder is as high as 820 mAh/g. However, if the pore size in cathode is small then the flow rate of air decreased, and as a result of that discharge voltage of batteries becomes low. We focused on resistance and porosity of cathode. So we studied the effects of conducting agents to zinc air batteries performance, capacity, power density, average discharge voltage, resistance. And we also measured porosity of cathode by the ASTM. So we have got optimum contents of conducting agent.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.98-103
• /
• 2006

[$Bi_2Sr_2Ca_1Cu_2O_x$](BSCCO 2212) tubes were fabricated by centrifugal melting process(CMP). BSCCO 2212 powder was melted in a Pt crucible and solidified in a rotating steel mold. The BSCCO 2212 tube samples separated from steel mold were heat-treated at $800^{\circ}C\;and\;810^{\circ}C$ in oxygen flow. The critical current($I_c$) of the samples was measured by transport measurement at 77K, and the microstructure was investigated by scanning electron microscope. The $J_c$ at 77K of the tubes heated treated at $800^{\circ}C\;and\;810^{\circ}C$ were 197 and 240 $A/cm^2$, respectively. It was observed that the plate like grains in BSCCO 2212 tube was more developed in the sample heat treated at $810^{\circ}C\;and\;800^{\circ}C$ heated tube. It is found that the critical current($I_c$) of the BSCCO 2212 sample was dependent on the heating schedule regarding the growth of the BSCCO 2212 grains.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.98-103
• /
• 2015

The reduction of the energy consumption in papermaking process become more important issue because of the regulation of green house gas (GHG) emission. Since more than half of energy for papermaking process is consumed during drying process, the increase of the drying efficiency would be very important solution for saving energy and reduction of GHG emission. The improvement of drying efficiency could be very difficult for the liner board mill because the liner board are usually made of recycled paper, OCC (old corrugated container). The short fiber and fines originated the OCC lead to compact sheet structure and delay the water flow out during wet pressing process and drying process. The application of lignocellulose spacer could provide more loose wet sheet structure and result in the higher drainage rate and the improved drying efficiency. In this study, the effects of the application of lignocellulose spacer to the liner board mill were evaluated based on the mill trial. In order to overcome the common disadvantage of the spacer, the loss of strength properties, the spacer was pretreated with amphoteric polyelectrolyte during mill trial. The results showed the application of pretreated spacer improved the drying efficiency by reducing steam consumption. And the loss in the strength properties by the spacer could be supplemented by the pretreatment.

• Korean Journal of Food Science and Technology
• /
• v.40 no.6
• /
• pp.621-625
• /
• 2008

Squid oil is an abundant source of polyunsaturated fatty acids. This is particularly true for eicosapentaenoic acid and docosahexaenoic acid. The principal objective of this study was to extend the stability and improve the process aptitude of squid liver oil. Fluidized bed coatings were employed for coating with microencapsulated oil. The efficiency of the fluidized bed coating of the microencapsulated powder was over 90%. The apparent density with zein-DP was 0.6 g/mL, thereby indicating that flow ability had been improved as the result of an increase in specific gravity. The solubility of artificial gastric and enteric fluids with HPMC-FCC was 59.9 and 0%, respectively, whereas with zein-DP solubility was 0 and 31.0%, respectively. Polyunsaturated fatty acid retention results demonstrated that zein-DP coating was higher than HPMC-FCC, followed by the microencapsulated squid liver oil method. These results demonstrated that the application of microencapsulation and fluidized bed micro-coating techniques improved the stability and processing compatibility of squid liver oil.