• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.357-361
• /
• 2001

The possibility of producing Cr$_2$O$_3$powder from waste magnesia-chromium refractory was investigated by sulfuric acid reaction, alkali fusion, water leaching & purification and heat treatment. The effects of temperature, the amount of NaOH added and the flow rate of air on chromium extraction efficiency in an alkali fusion step were investigated. The fusion product was leached with methanol to solve free-NaOH, and then leached with water to produce a Na$_2$CrO$_4$solution. The purity of chrome(Ⅵ) oxides, prepared both from monochromate with an impurity content and monochromate purified with $CO_2$were also examined. The purified monochromate solution was reduced from Cr(Ⅵ) to Cr(III) with NaHSO$_3$solution. The reduced solution was neutralized with NaOH to produce Cr(OH)$_3$. Water washing was treated to eliminate Na$_2$SO$_4$from neutralized Cr(OH)$_3$slurry. The washed Cr(OH)$_3$was dried and thermally treated to produce Cr$_2$O$_3$powder. The properties like lightness and hue of Cr$_2$O$_3$fabricated in this study were L=47.47, a=-14.40 and b=17.21.

• 한국식품과학회지
• /
• 제27권4호
• /
• pp.458-463
• /
• 1995

본 연구에서는 우유에 탈지분유 또는 난백분말을 각각 첨가하고 젖산균(Lactobacillus 3종)으로 발효하여 호상의 요구르트를 만든 후, 난백분말의 첨가가 젖산균의 생육과 산생성 및 요구르트의 품질(점도, 관능성, 휘발성 향기 성분)에 미치는 영향을 조사하였다. 난백분말의 첨가로 젖산균의 산생성이 대조군(우유로만 만든 요구르트)보다 현저하게 촉진되었으며, 산생성 촉진 효과는 난백분말 첨가량에 비례하여 증가하였다. 난백분말이 첨가된 호상요구르트의 점도는 대조군보다 대체로 높았으며, L. acidophilus로 발효시켜 만든 호상요구르트는 thixotropic flow의 특성을 나타냈다. 관능검사의 결과를 보면 표준 시료보다 난백분말 첨가 시료가 우수하였고, 난백분말 첨가 시료 중에서는 2% 첨가 시료가 가장 우수하였다. GC에 의한 휘발 성분 분석에서는 호상요구르트로부터 acetone, ethanol, diacetyl, butanol 및 acetoin의 5가지 성분이 확인되었다.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• 한국방재학회 논문집
• /
• 제8권2호
• /
• pp.23-30
• /
• 2008

UHPCC는 고성능, 고강도와 우수한 역학적 특성을 지니고 있다. UHPCC는 동일한 하중 하에서 타 재료에 비해 단면을 축소할 수 있는 장점이 있으나, 보통콘크리트에 비해 외국에서 수입하는 실리카흄이 많이 사용되는 배합이 되어 제작비용을 증가시키는 원인이 된다. 최밀 충전구성에 의한 UHPCC의 우수한 역학적 특성은 분체에 해당되는 아주 가는 입경의 골재를 치환함으로서 변화시킬 수 있다. 본 연구는 실리카흄과 실리카플로우를 석회석 미분말로 치환된 UHPCC의 특성을 파악하고자 한다. 본 실험 시편은 치환종류에 따라 크게 세 가지로 분류한다. 압축강도와 플로우를 비교 검토하였으며, SEM, XRD와 NMR 방법등을 사용하여 미세조직과 수화반응 현상을 분석하였다. 결론적으로 석회석 미분말로의 치환은 UHPCC 구조부재의 시공 단가를 감소시키며, 굳지 않은 UHPCC의 특성을 향상시키는 유용한 치환이 된다고 볼 수 있다.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.170-174
• /
• 2007

High Velocity Oxygen Fuel (HVOF) thermal spray coating of nano size WC-Co powder (nWC-Co) has been studied as one of the most promising candidate for the possible replacement of the traditional hard plating in some area which causes environmental and health problems. nWC-Co powder was coated on Inconel 718 substrates by HVOF technique. The optimal coating process obtained from the best surface properties such as hardness and porosity is the process of oxygen flow rate (FR) 38 FMR, hydrogen FR 57 FMR and feed rate 35 g/min at spray distance 6 inch for both surface temperature $25^{\circ}C\;and\;500^{\circ}C$. In coating process a small portion of hard WC decomposes to less hard $W_2C$, W and C at the temperature higher than its decomposition temperature $1,250^{\circ}C$ resulting in hardness decrease and porosity increase. Friction coefficient increases with increasing coating surface temperature from 0.55-0.64 at $25^{\circ}C$ to 0.65-0.76 at $500^{\circ}C$ due to the increase of adhesion between coating and counter sliding surface. Hardness of nWC-Co is higher or comparable to those of other hard coatings, such as $Al_2O_3,\;Cr,\;Cr_2O_3$ and HVOF Tribaloy 400 (T400). This shows that nWC-Co is recommendable for durability improvement coating on machine components such as high speed spindle.

• 대한본초학회지
• /
• 제33권4호
• /
• pp.53-58
• /
• 2018

Objectives : Kaempferia parviflora Rhizome is black ginger indigenous to Laos and Thailand. It has been used as a folk medicine to improve blood flow and promote vitality and longevity with good health and well being. For these reasons, Kaempferia parviflora Rhizome has been focused on developing it as a food or food supplement. In addition, Kaempferia parviflora Rhizome could be under consideration of new prescription based on its characteristic compounds, polymethoxyflavonoids. However, it needs to be certified as safe before it can be used. Here, a single-oral toxicity test and safety classification was carried out to identity acute information of the toxicity of Kaempferia parviflora Rhizome powder and to make sure of its safety in clinical applications. Methods : Test substance was orally administered to male and female SD-rat at dose levels of 5000 mg/kg to estimate approximate lethal dose(ALD). Based on the acute information of the toxicity, the safety classification was estimated using the HED(human equivalent dose)-based MOS(margin of safety). Results : At 14 days after treatment with test substance. there were no of test substance related with mortalities and clinical signs. In addition, no changes in the body or organ weights and no gross or histopathological findings were observed. Thus, the ALD of Kaempferia parviflora Rhizome powder was considered over 5,000 mg/kg in both female and male mice. Conclusions : Based on the single oral toxicity test using the highest and limit dose, 5,000 mg/kg and the decision guideline for safety classification based on HED-based MOS, it was estimated that Kaempferia parviflora Rhizome powder is classified as "Specified class B" indicating that clinical dose is not limited to patients as safe as food.

• 한국분말재료학회지
• /
• 제30권3호
• /
• pp.242-248
• /
• 2023

The Ag/WC electrical contacts were prepared via powder metallurgy using 60 wt% Ag, 40 wt% WC, and small amounts of Co₃O₄ with varying WC particle sizes. After the fabrication of the contact materials, microstructure observations confirmed that WC-1 had an average grain size (AGS) of 0.27 ㎛, and WC-2 had an AGS of 0.35 ㎛. The Ag matrix in WC-1 formed fine grains, whereas a significantly larger and continuous growth of the Ag matrix was observed in WC-2. This indicates the different flow behaviors of liquid Ag during the sintering process owing to the different WC sizes. The electrical conductivities of WC-1 and WC-2 were 47.8% and 60.4%, respectively, and had a significant influence on the Ag matrix. In particular, WC-2 exhibited extremely high electrical conductivity owing to its large and continuous Ag-grain matrix. The yield strengths of WC-1 and WC-2 after compression tests were 349.9 MPa and 280.7 MPa, respectively. The high yield strength of WC-1 can be attributed to the Hall-Petch effect, whereas the low yield strength of WC-2 can be explained by the high fraction of high-angle boundaries (HAB) between the WC grains. Furthermore, the relationships between the microstructure, electrical/mechanical properties, and deformation mechanisms were evaluated.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.12-20
• /
• 2024

This study successfully prepared high-porosity aluminosilicate fibrous porous ceramics through vacuum suction filtration using aluminosilicate fiber as the primary raw material and glass powder as binder, with the appropriate incorporation of glass fiber. The effects of the composition of raw materials and sintering process on the structure and properties of the material were studied. The results show that when the content of glass powder reached 20 wt% and the samples were sintered at the temperature of 1,000 ℃, strong bonds were formed between the binder phase and fibers, resulting in a compressive strength of 0.63 MPa. When the sintering temperatures were increased from 1,000 ℃ to 1,200, the open porosity of the samples decreased from 89.08 % to 82.38 %, while the linear shrinkage increased from 1.13 % to 10.17 %. Meanwhile, during the sintering process, a large amount of cristobalite and mullite were precipitated from the aluminosilicate fibers, which reduced the performance of the aluminosilicate fibers and hindered the comprehensive improvement in sample performance. Based on these conditions, after adding 30 wt% glass fiber and being sintered at 1,000 ℃, the sample exhibited higher compressive strength (1.34 MPa), higher open porosity (89.13 %), and lower linear shrinkage (5.26 %). The aluminosilicate fibrous porous ceramic samples exhibited excellent permeability performance due to their high porosity and interconnected three-dimensional pore structures. When the samples were filtered at a flow rate of 150 mL/min, the measured pressure drop and permeability were 0.56 KPa and 0.77 × 10^-6 m² respectively.

• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.185-191
• /
• 2017

본 연구는 고로슬래그 기반 모르타르에 잠재수경성 반응을 유도하기 위해 자극제로써의 역할로 WRP 및 FGD를 활용하고, 이에 탈취 및 흡착성분을 지닌 천연재료인 일라이트를 활용하여 기능성을 부여한 모르타르 환경에서 결합재 치환율 변화에 따른 모르타르의 유동성 및 강도특성을 분석하고자 한다. 실험결과, 플로는 일라이트 및 결합재 치환율이 증가할수록 유동성은 감소하는 것으로 나타났다. 공기량은 OPC와 결합재를 치환하지 않은 BSC 45를 사용한 배합 보다 BSC 65를 사용한 배합에서 낮은 공기량을 나타내었으며, 일라이트를 1% 치환한 경우 WRP 분말 및 FGD의 공기량은 서로 유사한 값을 나타냈으며, 일라이트 0%보다 전체적인 배합은 낮은 공기량을 나타내었다. 휨강도 및 압축강도의 경우는 일라이트를 치환할 시 강도는 낮아졌으며, WRP 및 FGD 치환율이 증가할수록 잠재수경성 반응으로 인해 강도는 증가하는 경향을 나타내었다. pH는 전반적으로 재령 7일까지 증가하는 경향을 나타내었고, 재령 28일의 경우에는 감소하는 경향을 나타내었으며, 일라이트를 치환율 시 미소하게 감소하는 경향을 나타내었다. 따라서, 유동성 및 강도특성 측면을 종합적으로 고려할 때 WRP 5%, FGD 5% 치환사용하는 경우가 최적의 배합인 것으로 판명되었다.

• 대한소아치과학회지
• /
• 제40권3호
• /
• pp.168-176
• /
• 2013

본 연구는 자이오머의 산성용액에서 시간에 따른 산중화능을 평가하고, 산에 노출된 자이오머의 표면변화를 관찰하기 위해서 시행되었다. 실험군으로는 수복용 자이오머인 Beautifil II와 유동성 자이오머인 Beautifil Flow F02, 대조군으로 수복용 복합레진인 $Filtek^{TM}$ Z250을 선택하였고, 원판과 가루 형태로 시편을 제작하여 pH 2.0의 염산 수용액과 혼합한 후 pH 값을 측정하였으며, 분말 형태의 자이오머는 새로운 염산 용액과 재혼합 후 pH 값을 측정하였다. 또한 주사전자현미경을 이용하여 원판형태 시편의 표면구조의 변화를 관찰하여 다음과 같은 결과를 얻었다. 원판 형태의 실험에서는 수복용 자이오머만이 실험 24시간 이후 유의한 pH 값의 증가를 보였다. 반면, 분말 형태의 실험에서는 수복용, 유동성 자이오머 모두 초기부터 유의한 수준의 pH 증가가 보였으며, 수복용 자이오머가 더 높은 pH 증가를 보였다. 분말 형태의 자이오머는 새로운 염산용액에서 이전 실험에 비해 낮은 정도의 pH 증가를 보였다. 또한, 충전용 자이오머의 표면에서 레진과 유동성 자이오머에 비해 더 많은 부식성의 구조적 변화가 발생했다. 결론적으로, 자이오머는 산중화능을 가지며, 필러 함량이 높은 충전용 자이오머는 유동성 자이오머보다 더 큰 산중화능이 있음을 알 수 있었다.