• Journal of Ocean Engineering and Technology
• /
• v.19 no.2 s.63
• /
• pp.53-59
• /
• 2005

The effect of pH on the corrosion characteristics in the dissimilar friction welded zone of IN713LC-SCM440 in the loaded torsional stress was studied. The corrosion experiment was performed for 120 hours on the specimens with five steps of pH. The surface corrosion pattern of the SCM440 area showed global corrosion and narrow pitting, which was caused by galvanic corrosion between friction welded IN713LC and SCM440, but corrosion did not proceeded from the IN713LC area. The average relative electrode potential gradually tends to decrease with the elapse of the immersion time in the acidity area. The average corrosion current also gradually tend to decrease The corrosion rate showed a larger value when the average relative electrode potential was higher and the average relative current was lower. The corrosion rate showed a larger value when the average relative electrode potential was higher in the acidity area, and it showed large when the average relative electrode potential was lower in the alkalinity area.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.624-630
• /
• 2017

In this study, we investigated the overpotential of precipitation related to the catalytic activity of electrodes on the initial process of electrodeposition of Co and Co-Ni alloys on polycrystalline Cu substrates. In the case of Co electrodeposition, the surface morphology and the magnetic property change depending on the film thickness, and the relationship with the electrode potential fluctuation was shown. Initially, the deposition potential(-170 mV) of the Cu electrode as a substrate was shown, the electrode potential($E_{dep}$) at the $T_{on}$ of electrodeposition and the deposition potential(-600 mV) of the surface of the electrodeposited Co film after $T_{off}$ and when the pulse current was completed were shown. No significant change in the electrode potential value was observed when the pulse current was energized. However, in a range of number of pulses up to 5, there was a small fluctuation in the values of $E_{dep}$ and $E_{imm}$. In addition, in the Co-Ni alloy electrodeposition, the deposition potential(-280 mV) of the Cu electrode as the substrate exhibited the deposition potential(-615 mV) of the electrodeposited Co-Ni alloy after pulsed current application, the $E_{dep}$ of electrodeposition at the $T_{on}$ of each pulse and the $E_{imm}$ at the $T_{off}$ varied greatly each time the pulse current was applied. From 20 % to less than 90 % of the Co content of the thin film was continuously changed, and the value was constant at a pulse number of 100 or more. In any case, it was found that the shape of the substrate had a great influence.

• Journal of the Korean Chemical Society
• /
• v.11 no.4
• /
• pp.179-184
• /
• 1967

The polarograms of Cd(II) in 0.15M tartrate solution were investigated in the range of pH values from 6.0 to 12.6 at 20$^{\circ}and 25$^{\circ}C. Up to pH value of 7.8, the limiting current and the halfwave potential were found to be constant, and when compared with the nitrate solution of the same $Cd^{++}$ concentration at the same ionic strength, the limiting current decreased by 28% and the halfwave potential shifted by -0.05 volt. The values of limiting current sharply decreased as the pH value exceeded 8.2 and the minimum values appeared at the pH values of 11.2~11.4. The values of halfwave potential gradually decreased as the pH value increased over 8.2 and the value of -0.78 volt was obtained at the pH value of 12.6. Possible mechanisms of electrode reaction were suggested and the anomalous behavior of reduction waves of Cd(II) in tartrate solution up to pH value of 9.4 was discussed.

• Journal of Korean Library and Information Science Society
• /
• v.49 no.3
• /
• pp.133-168
• /
• 2018

The study aims to present function and role of the library in the age of sharing economy. For this purpose, through theoretical discussion and review of the characteristics and benefits of the sharing economy, the potential and value of a sharing economy were analyzed and the role of libraries was compared and analyzed in terms of the value of a sharing economy. In this study, the values created from the sharing economy were divided into five categories: Economic value, Social value, Community value, Technical value, and Environmental value, showing that the potential value of a sharing economy is similar to the role, function and value of a library. Based on this, it presented a function and role to realize the sharing value of a library in the era of a sharing economy.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.161-165
• /
• 2005

Recently, it is on the increase interest for Al alloy with new material for ship application to substitute for FRP ship. The reason is thatAl alloy ship has beneficial characteristics such as high sea speed, increase of loadage and easy to recycle compared with FRP ship. In this paper, mechanical and electrochemical properties are investigated by slow strain rate test experiment in various applied potential condition. These results will provide as reference data to design ship by deciding optimum protection potential regard to hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys are not corroded with forming film which has the corrosion resistance property in neutral solution. However, it was observed that formation and destruction of passive film by $Cl^-$ ion in sea water environment. At comparison of current density after 1200 sec in potentiostatic experiment, the current density in the potential range of -0.68 $\~$-1.5 V is shown low value. The low current density means protection potential range. Elongation in applied potential of 0 V was high. However, the corrosion protection application in this condition is impossible potential because the toughness is low value by decreasing strength by active dissolution reaction at parallel part of specimen. The film composed with $CaCO_3$ and $Mg(OH)_2$ has a corrosion resistance property. However, the uniform electrodeposition coating at below -1.6 V potential is not formed since the time to form the uniform electrodeposition coating is short. Therefore, it is concluded that mechanical property is poor because effect by hydrogen gas generation is larger than that of electrodeposition coating. It is concluded that the optimum protection potential range from comparison of_maxim urn tensile strength, elongation and time to fracture is -1.3$\~$0.7 V (SSCE).

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.105-112
• /
• 2021

This study aims to find empirical evidence of the effect of increasing income on the potential transfer of wealth from manufacturing companies that go public to stakeholders. Earnings management with an accrual approach with the Modified Jones model is an identifier of the availability of earnings management practices, without paying attention to both positive and negative symbols. The interpretation of the results of the discretionary accrual measurement between positive and negative symbols has different meanings. Positive discretionary accruals indicate that management uses income-increasing techniques. Meanwhile, negative discretionary accruals indicate that management uses income-reducing techniques. Income-increasing techniques tend to be viewed as opportunistic behavior of managers. This study used 111 data from manufacturing companies listed on the IDX (Indonesia Stock Exchange) from 2015-2018. Path analysis is used to test the hypothesis. The results of this study are in line with the point of view of management strategy, increasing income is used as a way to transfer potential welfare from the company to stakeholders. Social welfare (tax) and managerial remuneration are proven to be mediators in increasing the effect of increasing income on future company value. Further research can complete the potential welfare transfer against the shareholders related to income-increasing strategy.

• The Journal of Korean Medicine
• /
• v.45 no.1
• /
• pp.139-149
• /
• 2024

Objectives: The aim of the study was to investigate the potential of Yangdorak diagnosis application against gallstone scanned by Ultrasound diagnosis. Method: For this aim, among 97 patients who had visited Julip Korean Medicine Clinic from July 2016 to June 2023, 30 patients with no gallstone as a control group and 67 patients with gallstone and diagnosed by ultrasonography, were subjected to Yangdorak diagnosis. Then, the changes in Gallbladder Meridian (GB) value as F5 AVE(average of left and right GB value) by Yangdorak were comparatively analyzed between gallstone and non-gallstone groups and statistical significance was evaluated by Tukey's multiple comparison test using Prism software. Results: After all subjects were evaluated by the Yangdorak and ultrasonography to assess the potential of the Yangdorak diagnosis for gallstone, it was noteworthy that the Yangdorak values relevant to F5 AVE of female gallstone group(N=36) were significantly (p<0.001) decreased compared to the control group (N=30), while there was no significance in male gallstone group(N=31). Also, it was recognized significant difference between male and female groups. Conclusion: Based on these results, if the Yangdorak value can be estimated from a decrease with clinical symptom in female patient, it is recommended to follow up the ultrasonography test for diagnosing the gallstone.

• Information Systems Review
• /
• v.5 no.1
• /
• pp.129-146
• /
• 2003

Increasing number of transactions and investments in technology has sparked a growing interest in technology valuation. However, it has not been easy to come up with an objective valuation of technology due to variance in technology value and specialty of technology valuation. The main objective of this paper lies in the development of a new system for technology valuation, Web-based Interactive Technology Valuation (WITV) system, which valuate the technology and analyze the technology value strategy. WITV system uses the Technology Valuation Attractiveness Model (TVAM). TVA is composed of the Intrinsic Value of Technology (IVT) and the Extrinsic Value of Technology (EVT). This paper experiment the feasibility of the TVA Model and WITV System by conducting an empirical study on small & medium sized manufacturing companies in IT industry, registered on KOSDAQ. In this study, the potential value is defined as the technology value. It is represents the expected profit appraised by the market under the competitiveness of technology and the growth of the market. TVA is measured as the index to forecast the Price-to-Book value Ratio (PBR), which is the proxy variable for the potential value of the technology. The results identify the feasibility of the TVAM through a high correlation between the TVA and the PBR.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.2
• /
• pp.104-108
• /
• 2007

This paper deals with an approach to the reduction of potential rise according to the buried depth of structure. In order to analyze the surface potential rise of structure, an electrolytic tank which simulates the semi-infinite earth has been used. The potential rise has been measured and analyzed for types of structure using an electrolytic tank experimental apparatus in real time. The structure models were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. When a test current flowed through structure models, potential gradient was the highest value in case of the outline frame type(structure model A). The distributions of surface potential rise are dependent on the resistivity and absorption percentage in concrete attached to structure model.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.8
• /
• pp.371-377
• /
• 2005

This paper Presents the Potential gradient characteristics of structure grounding electrode when a test current flows through grounding electrode. In order to analyze the potential gradient of ground surface on structure grounding electrode, the reduced scale model has been used. The potential gradient has been measured and analyzed for types of structure using the hemispherical grounding simulation system in real time. The structures were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. The supporter was made to put up with weight of structure and could move into vertical, horizontal, rotary direction. When a test current flowed through structure grounding electrodes, ground potential rise was the lowest value at electric cage type(type B). According to resistivity and absorption percentage In concrete attached to structure, the potential distribution of ground surface appeared differently.