• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.129-144
• /
• 2003

Generally, investigation methods of cut slope are conducted only geological surface survey to gain engineering geological data of cut slopes. These methods have many problems such as limitations of investigation for a special area. So geophysical investigations such as geotomography, seismic and electrical resistivity methods have been used to search for failure surface in potential failure slopes or failed slopes. But investigation method using the borehole camera is recently a used method and it is thought that this method is more reliable method than other investigation methods because of being able to see by the eyes. Therefore, this paper was conducted investigations of borings and BIPS(Borehole Image Processing System) to search for potential sliding surfaces and was applied to obtain information of discontinuity on failed and potential failure slope in highway. As the results of BIPS, we could decide potential sliding surface in the slope, conducted to check slope stability and decided slope stability measures.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 1999년도 제2회 학술발표회
• /
• pp.217-239
• /
• 1999

일반적으로 사면에 대한 조사방법은 지표지질조사를 실시하여 불연속면의 정보를 획득하는 것이 보편화 된 방법이나 제한된 영역의 정보만을 획득하게 되는 문제점을 가지게 된다. 일반적으로 절취사면에서 활동면 또는 활동가능면을 추정하는 방법으로 토모그래피, 전기비저항탐사, 탄성파 탐사와 같은 지구물리탐사 방법을 이용하나 최근에 사용된 카메라 장치를 이용하는 방법은 시추공벽의 화상을 촬영하여 직접 육안으로 확인 할 수 있는 방법으로 다른 방법들에 비해 보다 확실한 방법이라고 생각된다. 그러므로 본 논문은 고속도로 현장에서 붕괴가 발생된 사면의 활동면 위치를 파악하기 위해 총 4 개공의 시추를 실시하였고 BIPS(Borehole Image Processing System) 장비를 도입하여 활동면의 위치를 파악하였다. 그 결과, 철탑구간은 지표에서 20m 하부구간까지 암질이 매우 불량하고 점토층이 충전된 파쇄대층이 존재하고 철탑좌측구간은 이미 인장균열이 발생되었으며 점토층이 충전된 층리면 존재하고 층리면은 사면방향으로 경사져 붕괴가능성이 클 것으로 나타났다. BIPS 결과는 사면안정대책 방안에 수립하는 데 이용하여 억지말뚝으로 사면보강공을 선정하였다.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.49-60
• /
• 2019

Crack instability propagation during coal and rock mass failure is the main reason for electromagnetic radiation (EMR) generation. However, original cracks on coal and rock mass are hard to study, making it complex to reveal EMR laws and mechanisms. In this paper, we prefabricated cracks of different inclinations in coal and rock samples as the analogues of the native cracks, carried out uniaxial compression experiments using these coal and rock samples, explored, the effects of the prefabricated cracks on EMR laws, and verified these laws by measuring the surface potential signals. The results show that prefabricated cracks are the main factor leading to the failure of coal and rock samples. When the inclination between the prefabricated crack and axial stress is smaller, the wing cracks occur first from the two tips of the prefabricated crack and expand to shear cracks or coplanar secondary cracks whose advance directions are coplanar or nearly coplanar with the prefabricated crack's direction. The sample failure is mainly due to the composited tensile and shear destructions of the wing cracks. When the inclination becomes bigger, the wing cracks appear at the early stage, extend to the direction of the maximum principal stress, and eventually run through both ends of the sample, resulting in the sample's tensile failure. The effect of prefabricated cracks of different inclinations on electromagnetic (EM) signals is different. For samples with prefabricated cracks of smaller inclination, EMR is mainly generated due to the variable motion of free charges generated due to crushing, friction, and slippage between the crack walls. For samples with larger inclination, EMR is generated due to friction and slippage in between the crack walls as well as the charge separation caused by tensile extension at the cracks' tips before sample failure. These conclusions are further verified by the surface potential distribution during the loading process.

• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.571-580
• /
• 2018

The failure mechanism of tunnel roof is investigated with upper bound theorem of limit analysis. The stochastic settlement and nonlinear failure criterion are considered in the present analysis. For the collapse of tunnel roof, the surface settlement is estimated by the simplified stochastic medium theory. The failure curve expressions of collapse blocks in homogeneous and in layered soils are derived, and the effects of material parameters on the potential range of failure mechanisms are discussed. The results show that the material parameters of initial cohesion, nonlinear coefficient and unit weight have significant influences on the potential range of collapse block in homogeneous media. The proportion of collapse block increases as the initial cohesion increases, while decreases as the nonlinear coefficient and the unit weight increase. The ground surface settlement increases with the tunnel radius increasing, while the possible collapse proportion decreases with increase of the tunnel radius. In layered stratum, the study is investigated to analyze the effects of material parameters of different layered media on the proportion of possible collapse block.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.187-195
• /
• 2023

Intensive rainfall during the summer season in Korea has triggered numerous devastating landslides outside of downtown in mountainous areas. The 2D slope stability analysis that is generally used for cut slopes and embankments is inadequate to model slope failure in mountainous areas. This paper presents a new 3D slope stability formulation using the global sliding vector in the limit equilibrium method, and it uses an ellipsoidal slip surface for static and quasi-static analyses. The slip surface's flexibility of the ellipsoid shape gives a lower FS than the spherical failure shape in the Fellenius, Bishop, and Janbu's simplified methods. The increasing sub-columns of each column tend to increase the FS and converge to a steady value. The symmetrical geometric conditions of the convex turning corners do not indicate symmetrical failure of the surface in 3D analysis. Pseudo-static analysis shows that the horizontal seismic force decreases the FS and increases the mass volume at the critical failure state. The stability index takes the FS and corresponding sliding mass into consideration to assess the potential risk of slope failure in complex mountainous terrain. It is a valuable parameter for selecting a vulnerable area and evaluating the overall risk of slope failure.

• 지구물리
• /
• 제5권2호
• /
• pp.111-129
• /
• 2002

일반적으로 사면에 대한 조사방법은 지표지질조사를 실시하여 불연속면의 정보를 획득하는 것이 보편화 된 방법이나 제한된 영역의 정보만을 획득하게 되는 문제점을 가지게 된다. 절취사면에서 활동면 또는 활동가능한 연약한 파쇄대를 추정하는 방법으로 토모그래피, 전기비저항탐사, 탄성파 탐사와 같은 지구물리탐사 방법을 이용하나 최근에 사용된 카메라 장치를 이용하는 방법은 시추공벽의 화상을 촬영하여 직접 육안으로 확인 할 수 있는 방법으로 다른 방법들에 비해 보다 확실히 활동가능면을 찾아낼 수 있는 방법이라고 생각된다. 본 논문에서는 고속도로 현장에서 붕괴가 발생한 사면의 붕괴원인과 활동면을 추정하고 굴착이 되지 않은 대절토 사면의 활동가능성을 예측하기 위해 시추조사를 실시한 후 BIPS(Borehole Image Processing System) 장비를 도입하여 사면내의 활동가능성 예측 및 불연속면 방향에 대한 정보를 획득하여 굴착시의 사면안정 문제를 예견해 보았다. 붕괴가 발생된 사면에서는 활동가능성이 있는 점토층을 확인할 수 있었으며 굴착되지 않은 사면에서는 주절리군의 발달방향이 사면방향으로 경사져 활동가능성이 매우 클 것으로 예상되어 사면에 대한 안정대책을 제시하였다. 특히, 굴착되지 않은 절토사면은 굴착 후에 안정성을 확보하기 위한 사면경사 완화방안은 지형이 급경사를 형성하여 100m 이상의 장대면을 형성하므로 사면을 앵커로 보강하는 방안 및 절토구간을 터널로 변경하는 방안을 제안하였다.

• 한국지반공학회지:지반
• /
• 제4권2호
• /
• pp.5-14
• /
• 1988

균질토 사면에서 진행성 파괴에 대한 확를론적 모델이 제시되었다. 파괴면 위의 어떤 절편에 대한 국부적인 Safety Margin은 정규분포차 가정하였다. 파괴면을 따라 존재하는 전단강도의 불확실성은 1차원 Random Field Models로 표현되었다. 이 연구에서는 파괴가 Toe에서 시작되어 사면 정상까지 진행되는 경우만을 고려하였다. 파괴면위의 어느 두 인접 절편의 Safety Margin의 Joint Distribution은 Bivariate Normal로 가정하였다. 활동파괴의 전체적인 파괴확률은 일련의 Conditional events의 급으로 표현되었다. 최종적으로 개발된 절차가 절취사면의 신뢰도를 얻기 위하여 한 예에 적용되었다.

• 대한토목학회논문집
• /
• 제8권3호
• /
• pp.85-90
• /
• 1988

균질토 사면에서 파괴에 대한 확률론적모델이 제시되었다. 사면의 안전은 관례적인 안전을 보다는 파괴확률로써 측정된다. 사면파괴의 Safety Margin은 정규분포라 가정하였다. 어떤 균질한 흙층에 있어서 흙의 특성에 영향을 주는 불확실성의 원인은 본래의 공간적인 가변성, 불충분한 시료에서 오는 판단오차 그리고 실험오차등이 었다. 파괴면을 따라 존재하는 전단강도의 불확실성은 1차원 Random Field Madels로 표현되었다. 파괴aus의 양상은 대수나선 곡선을 따른다고 가정하였다. 파괴면과 그것을 따라 작용하는 힘의 통계적 특성을 유도하여 사면의 파괴확률을 계산하였다. 마지막으로 개발된 절차가 사면의 신뢰성 해석에 대한 하나의 예제 연구에 적용되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.98-101
• /
• 2003

The Alkali-Aggregate Reaction (AAR) may cause a serious failure in the concrete structures. Several researchers in some nations have performed the continuous studies to prevent failure of a concrete structures by the AAR distress as well as the studies to manifest the mechanism. The ASTM Standards to prevent failure by potential AAR aggregates were established in 1950. The KS F2545 and KS F 2546 were established to test the susceptibility of aggregate to potential AAR in 1982. But the researches on the AAR have not been performed affluently in Korea because the distress due to AAR has seldom been reported officially. In this study, the Chemical Method and Scanning Electron Microscopy (SEM) were used to verifying the cause of the pattern crack on the surface and internal crack in the plain concrete pavement. It can be concluded that the distress of a specific site in plain concrete pavement was mainly due to AAR, and the chemical method and SEM may be the effective tools for verifying the cause of AAR distresses.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.1-6
• /
• 2007

Railway wheels in service are regularly checked by ultrasonic testing, acoustic emission and eddy current testing method and so on. However, ultrasonic testing is sometimes inadequate for sensitively detecting the cracks in railway wheel which is mainly because of the fact of crack closure. Recently, many researchers have actively fried to improve precision for defect detection of railway wheel. The development of a nondestructive measurement tool for wheel defects and its use for the maintenance of railway wheels would be useful to prevent wheel failure. The induced current focusing potential drop(ICFPD) technique is a new non-destructive tasting technique that can detect defects in railway wheels by applying on electro-magnetic field and potential drops variation. In the present paper, the ICFPD technique is applied to the detection of surface and internal defects for railway wheels. To defect the defects for railway wheels, the sensor for ICFPD is optimized and the tests are carried out with respect to 4 surface defects and 6 internal defects each other. The results show that the surface crack depth of 0.5 mm and internal crack depth of 0.7 mm in wheel tread could be detected by using this method. The ICFPB method is useful to detect the defect that initiated in the tread of railway wheels