• Journal of the Korean earth science society
• /
• v.30 no.2
• /
• pp.247-256
• /
• 2009

Characteristics of hydrography and tidal currents were investigated in Hampyung Bay through in situ CTD data, tidal currents and elevations. According to the seasonal weather variability, hydrography showed the lower density with high temperature and low salinity in summer and the higher density with low temperature and high salinity in winter. In particular, the thermal structure like a tidal front was formed along the central channel at the neap tide of summer. The critical value of the parameter $SH(=log_{10}(H/U^3)$ where H is depth and U is $M_2$ tidal current amplitude) representing the formation position of tidal front was estimated from 2.4 to 3.5. In addition, the potential energy anomaly $({\phi})$ was ranged between 0.985 and 6.998 Joule/$m^3$, which gradually increased from the mouth into the inner bay. This front may be caused by the unique topography with wide tidal flat and the local difference of tidal current strength. The observed tidal currents at the mouth of bay showed that the ebb time was shorter than the flood time with the increase of depth. This asymmetric ebb-tide dominance is interpreted as a result of tidal distortion by the development of a shallow-water-constituent in Hampyung Bay with a wide macro-tidal flat.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.294-299
• /
• 2003

The seeds of naturally growing Heteropappus hispidus (Thunb.) were treated by nine different doses (0, 10, 20, 40, 80, 120, 160, 200, 300, 400 Gy) of gamma rays to investigate their germination rate and to quantity the characteristics of their germinated plants as like as leaf appearance and length, the formation rate of anthocyanin color in stem 30 days after germination, the formation rate of rosette leaf and multi-shoot, the flowering and seed-bearing, and shoot length. The germination rate at least up to 120Gy was not greatly affected but was rapidly decreased at over 160Gy. It seemed that lethal dose ($LD_{50}$) of germination was 160Gy. The leaf appearance and growth was also inhibited, but the formation rate of anthocyanin color in the flower stem was enhanced up to 30% with dose. The rosette plants were observed in plants irradiated with higher than 40Gy. Multi-shoots were developed over 80Gy. For a short shoot length and bundle of thin stem, it was considered that they can be selected as the potential pot flower plants, through genetic fixation. In particular, it was suggested that the formation of anthocyanin color in flower stem, rosette and multi-shoot plants induced by the high dose of gamma rays could be utilized as the morphological markers for the mutant selection of Heteropappus hispidus (Thunb.).

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.4
• /
• pp.244-248
• /
• 2017

The effects of ultrasonic (1.2~1.7 kJ/g TS) pretreatment on the solubilization of dairy and livestock sludge were separately evaluated to investigate the possibility of recycling dairy sludge as a potential source of organic carbon. Compared to other industrial wastewater and sewage sludge, dairy sludge has higher organic matter content and no toxic materials. The solubilization rates of dairy and livestock sludge, at a specific energy input of 1.7 kJ/g TS, were 14.5% and 10.6%, respectively. After the 90-minute ultrasonic treatment, the soluble COD (chemical oxygen demand) increased about 7.1 times that of the initial SCOD, at an increase rate of $0.022m^{-1}$. In comparison, the increase in soluble nitrogen, which was ~3.4 times that of the initial soluble nitrogen concentration, was much smaller than the increase in SCOD; thus, the C/N ratio increased from 4.0 to 8.7.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.871-878
• /
• 2004

Pulsed electric fields(PEF) technology is one of the latest nonthermal methods of food processing for obtaining safe and minimally processed foods. This technology can be effectively explored for obtaining safe food with minimum effect on nutritional, flavor, rheological and sensory qualities of food products. The process involves the application of high voltage(typically 20 ${\sim}$ 80 kv/cm) to foods placed between two electrodes. The mode of inactivation of microorganism; by PEP processing has been postulated in term; of electric breakdown and electroporation. The extent of destruction of microorganisms in PEF processing depends mainly on the electric field strength of the pulses and treatment time. For each cell types, a specific critical electric field strength and specific critical treatment time are required depending on the cell characteristics and the type and strength of the medium where they have been present. The effect also depends on the types of microorganisms and their phase of growth. A careful combination of processing parameters has to be selected for effective processing. The potential applications of PEF technology are numerous ranging from biotechnology to food preservation. With respect to food processing, it has already been established that, the technology is non-thermal in nature, economical and energy efficient, besides providing minimally processed foods. This article gives a brief overview of this technology for food processing applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.26-35
• /
• 2016

As a potential clean energy resource, the production and consumption of hydrogen gas are expected to gradually increase, so that hydrogen related studies are also increasing. The thermal and chemical properties of hydrogen result in its high flammability; in particular, there is a high risk if leaks occur within an enclosed space. In this study, we applied the computational fluid dynamics method to conduct a numerical study on the leakage behavior of hydrogen gas and compared these numerical study results with an experimental study. The leakage hole diameter was selected as an important parameter and the hydrogen gas dispersion behavior in an enclosed space was investigated through various analytical methods. Moreover, the flammable regions were investigated as a function of the leakage time and leakage hole size. We found that the growth rate of the flammable region increases rapidly with increasing leakage hole size. We also investigated the relation between the mass flow rate and the critical time when the hydrogen gas reaches the ceiling. The analysis of the monitoring points showed that the hydrogen gas dispersion behavior is isotropic and independent of the geometry. We found that the concentration of gas in an enclosed space is affected by both the leakage flow rate and amount of gas accumulated in the enclosure.

• Journal of the Korean Institute of Gas
• /
• v.19 no.2
• /
• pp.54-65
• /
• 2015

China holding the world largest shale resources, has been trying to develop their domestic shale gas fields mainly with its NOCs. Chinese shale industry looks likely to have high potential to grow in the future, considering the eager support of Chinese government and the rapid development of relevant technologies by NOCs. However, there are opposite opinions as well that Chinese shale gas could not play a positive short-term results because of the complexity of structural geology, inadequacy of water resources and related infrastructure. Recently, Korean companies began to be interseted in Chinese shale gas industry, because of the special relationships with Korean industries in terms of geographic proximity and better opportunities due to the early phase of shale gas business in China. In this study, it was tried to help those companies looking out of future Chinese shale gas industry that surveying current status and problems of Chinese shale gas industry and relevant industries and investigating some trials and policies driven by China government. As a result, the various and long-term problems in Chinese shale development were reviewed and the active supports and polices of Chinese government, NOC's trials for establishments of their independent technologies and the cooperation with foreign companies or M&As were also investigated.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.4
• /
• pp.77-87
• /
• 2014

Ecotourism has the potential to boost the energy of a village as it pays keen attention to the ecosystem and the residents of the village. It is empowered by participation of and cooperation among stakeholders who are closely involved in ecotourism. However, many of them express difficulty in striking a right balance between development and conservation with regard to promoting ecotourism. Against this backdrop, this research paper investigates the structure of conflict that the stakeholders, especially those in Stork Village in Yesan County, South Chungcheong Province of Korea, experience during the process of establishment of government-led ecotourism. In addition, this study examines the problems of government-led ecotourism model and how they can be addressed. To analyze conflict structure, this paper used Q methods and found out that the budget-related stakeholders are largely divided into four groups as who; a) complain about how business profits are distributed; b) secure profits by expanding programs; c) consider human settlement, and; d) broaden people's participation. The biggest contributor to the conflicts is found that compensation was given discriminately to different jurisdictions. The second finding is that residents became less cooperative when the financial compensation did not live up to their expectation. For instance, they would demand the tourism facility physically expanded, repeatedly complain about the process of the work, and even accuse the government of degrading ecosystem. In other words, unless the compromise is reached with the residents regarding financial compensation, it could be difficult to encourage their participation and develop as a program-oriented tour. Lastly, the tour program needs to induce voluntary participation of the residents and deliver proper information on ecosystem and natural resources so as to last as sustainable ecotourism. The success of ecotourism will be subject to the cooperation of stakeholders in a region, conservation of our fragile ecosystem, and realization of sustainable growth through sharing economic benefits. This study looks into the cause of the conflicts of ecotourism sites and their structure. If this paper can bring about cooperation of stakeholders, the management and operation of ecotourism sites would be more sustainable.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.3
• /
• pp.31-41
• /
• 2001

In this study, we have examined the potential degradation of MTBE(methyl tert-butyl ether) by pure culture ENV425 and mixed culture obtained from gasoline contaminated soil using n-butane as the sources of carbon and energy. The results described in this study suggest that MTBE is degraded cometabolically by ENV425 and mixed culture grown on n-butane. Butane and MTBE degradation was completely inhibited by acetylene, which indicated that both substrates were degraded by butane monooxygenase. These cultures grown on n-butane generated TBA (tert-butyl alcohol) as a metabolite of MTBE oxidation. TBA Production was accounted 54.7% and 58.6% for MTBE oxidation by ENV425 and mixed culture, respectively. In resting cell experiments, however, TBA and TBF were detected as the oxidation products of MTBE by ENV425 and mixed culture. The observed maximal MTBE degradation rates were 52.3 and 62.3 (nmol MTBE degraded/hr/mg TSS) by ENV425 and mixed culture, respectively, and the observed maximal transformation yields ($T_y$) were 44.7 and 34.0 (nmol MTBE degraded/$\mu$mol n-butane utilized), and the observed maximal transformation capacities ($T_c$) were 199 and 226 ($\mu$mol MTBE degraded/mg TSS used).

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.318-326
• /
• 2014

This study was conducted to investigate the potential of non-used forest biomass residues as raw materials for making wood pellets with additives such as wood tar and starch and to evaluate fuel characteristics of the pellets. Wood tar, a by-product provided from the carbonization process of wood, could be a suitable additive for wood pellet production due to its higher calorific value and lower hazardous heavy metals, such as cadmium and mercury, compared to woody biomass. When the wood tar (10 wt%) was added, the calorific value was increased from 4,630 kcal/kg (wood pellet without additive) to 4,800 kcal/kg (wood pellet with additive). With the increase of additive amount into wood pellet, the length and individual density of wood pellet increased. In addition, bulk density of the pellets was increased, whereas the fine content was decreased. Consequently the overall productivity of wood pellets was improved by adding 2 w% additives into wood pellets; the percentage of productivity increase was 5.9% and 4.9% for adding starch and wood tar, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.74-74
• /
• 2010

One-dimensional nanosturctures such as nanowires and nanotube have been mainly proposed as important components of nano-electronic devices and are expected to play an integral part in design and construction of these devices. Silicon carbide(SiC) is one of a promising wide bandgap semiconductor that exhibits extraordinary properties, such as higher thermal conductivity, mechanical and chemical stability than silicon. Therefore, the synthesis of SiC-based nanowires(NWs) open a possibility for developing a potential application in nano-electronic devices which have to work under harsh environment. In this study, one-dimensional nanowires(NWs) of cubic phase silicon carbide($\beta$-SiC) were efficiently produced by thermal chemical vapor deposition(T-CVD) synthesis of mixtures containing Si powders and hydrocarbon in a alumina boat about $T\;=\;1400^{\circ}C$ SEM images are shown that the temperature below $1300^{\circ}C$ is not enough to synthesis the SiC NWs due to insufficient thermal energy for melting of Si Powder and decomposition of methane gas. However, the SiC NWs are produced over $1300^{\circ}C$ and the most efficient temperature for growth of SiC NWs is about $1400^{\circ}C$ with an average diameter range between 50 ~ 150 nm. Raman spectra revealed the crystal form of the synthesized SiC NWs is a cubic phase. Two distinct peaks at 795 and $970\;cm^{-1}$ over $1400^{\circ}C$ represent the TO and LO mode of the bulk $\beta$-SiC, respectively. In XRD spectra, this result was also verified with the strongest (111) peaks at $2{\theta}=35.7^{\circ}$, which is very close to (111) plane peak position of 3C-SiC over $1400 ^{\circ}C$ TEM images are represented to two typical $\beta$-SiC NWs structures. One is shown the defect-free $\beta$-SiC nanowire with a (111) interplane distance with 0.25 nm, and the other is the stacking-faulted $\beta$-SiC nanowire. Two SiC nanowires are covered with $SiO_2$ layer with a thickness of less 2 nm. Moreover, by changing the flow rate of methane gas, the 300 sccm is the optimal condition for synthesis of a large amount of $\beta$-SiC NWs.