• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4015-4021
• /
• 2011

시아나이드 화합물과 같은 환경에 유해한 도금첨가제를 사용하지 않는 친환경적인 무전해 구리도금용 도금용액조성을 개발하기 위하여, potassium ferrocyanide, aminoacetic acid (=glycine), 2,2'-dipyridyl과 같은 첨가제를 이용하여 첨가제의 투입량 또는 조성비가 도금특성에 미치는 영향을 조사하였다. 무전해도금으로 적층된 구리도금층의 도금속도는 potassium ferrocyanide와 aminoacetic acid의 조성비가 20 mg/L과 0.01 mol/L 이었을 때, $9.5mg{\cdot}cm^{-2}{\cdot}hr^{-1}$으로 나타났으며, 도금경도의 변화도 도금속도와 연동하여 비례적으로 변화하였다. 하지만 potassium ferrocyanide를 첨가하지 않은 도금용액의 조성에서도 $9.1mmg{\cdot}cm^{-2}{\cdot}hr^{-1}$의 도금속도를 나타내었다.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.886-889
• /
• 2018

This article presented two-staged chemical precipitation for radioactive wastewater decontamination by using chemical agents. The total amount of radioactive wastewater was $35m^3$, and main radionuclides were Cs-137, Cs-134, and Co-60. Initial radioactivity concentration of the liquid waste was 2264, 17, and 9 Bq/L for Cs-137, Cs-134 and Co-60, respectively. Potassium ferrocyanide, nickel nitrate, and ferrum nitrate were selected as chemical agents at high pH levels 8-10 according to the laboratory jar tests. After the process, radioactivity was precipitated as sludge at the bottom of the tank and decontaminated clean liquid was evaluated depending on discharge limits. By this precipitation method decontamination factors were determined as 66.5, 8.6, and 9 for Cs-137, Cs-134, and Co-60, respectively. By using the potassium ferrocyanide, about 98% of the Cs-137 was removed at pH 9. At the bottom of the tank, radioactive sludge amount from both stages was totally $0.98m^3$. It was transferred by sludge pumps to cementation unit for solidification. By chemical processing, 97.2% of volume reduction was achieved. The potassium ferrocyanide in two-staged precipitation method could be used successfully in large-scale applications for removal of Cs-137, Cs-134, and Co-60.

• 대한화학회지
• /
• 제5권1호
• /
• pp.42-47
• /
• 1961

A titration of a small amount of iron with standard potassium ferrocyanide using potassium thiocyanate as indicator has been studied. A sample solution containing $0.1{\sim}1.0$ mg. $Fe^{3+}$ in 60 ml. is pipeted into 100 ml. Erlenmyer flask and the pH of the solution is adjusted to $1.5{\sim}3.0$ with 0.1 N or 1 N $HNO_3$ and $NH_4OH.$ To this solution one ml. of 1 M KCNS solution as indicator is added. The solution colored by iron thiocyanate complex is titrated with 1/200 M or 1/400 M standard solution of potassium ferrocyanide from a 5 ml. micro-buret. Near the end point, when the color of sample changes from deep red to green, about 20 ml. of ether is added and shake the flask vigorously. The red color is extracted to the ether layer. To settle the ether layer a few drops of ethanol is added and then standard solution is added dropwise and shake vigorously. The end point is reached when the color of the ether layer disappears owing to the quantitative formation of $Fe_4[Fe(CN)_6]_3.$ In this titration, 0.lmg. of $Fe^{3+}$ can be determined within 1.0% of titration error, provided the following optimum conditions, i.e., pH $1.5{\sim}3.0$, final concentration of KCNS indicator; $0.01{\sim}0.02M$, at room temperature. The titration found to be interfered by the presence of slightly soluble salts, stable complex forming ions and the ions which would be reduced by ferrocyanide or oxidized by ferric ion.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2000년도 NEW STRATEGY FOR DRUG DEVELOPMENT IN POST-GENOMIC ERA(대한약학회)
• /
• pp.252.1-252.1
• /
• 2000

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.236-243
• /
• 2017

A fixed-bed zinc/nickel redox flow battery (RFB) is designed and developed. The proposed cell has been established in the form of a fixed bed RFB. The zinc electrode is immersed in an aqueous NaOH solution (anolyte solution) and the nickel electrode is immersed in the catholyte solution which is a mixture of potassium ferrocyanide, potassium ferricyanide and sodium hydroxide as the supporting electrolyte. In the present work, the electrode area has been maximized to $1500cm^2$ to enforce an increase in the energy efficiency up to 77.02% at a current density $0.06mA/cm^2$ using a flow rate $35cm^3/s$, a concentration of the anolyte solution is $1.5mol\;L^{-1}$ NaOH and the catholyte solution is $1.5mol\;L^{-1}$ NaOH as a supporting electrolyte mixed with $0.2mol\;L^{-1}$ equimolar of potassium ferrocyanide and potassium ferricyanide. The outlined results from this study are described on the basis of battery performance with respect to the current density, velocity in different electrolytes conditions, energy efficiency, voltage efficiency and power of the battery.

• Korean Chemical Engineering Research
• /
• 제57권6호
• /
• pp.847-852
• /
• 2019

본 연구에서는 퀴노잘린(quinoxaline)과 페로시아나이드(ferrocyanide)를 활물질로 활용한 알칼리 전해질 기반 수계 유기 레독스 흐름전지에 대해 다양한 첨가제를 적용하여 성능을 비교하는 실험을 진행하였다. 퀴노잘린(quinoxaline)의 경우 염화칼륨(KCl) 전해질보다는 수산화칼륨(KOH) 전해질에서의 레독스 전위(-0.97 V)가 더 작은 위치에 있으며, 이에 따라 KOH 전해질에 대해 페로시아나이드와 조합을 이루었을 때, 셀 전압 값은 1.3 V로 높게 나타났다. 상용 양이온 교환막 중 하나인 Nafion 117 멤브레인을 사용하였을 때, 퀴노잘린(quinoxaline)의 부반응 현상을 반전지 상에서 관찰할 수 있었으며, 이에 따라 충방전 자체가 잘 되지 않는 문제점이 있다. 따라서, 문제점이 되는 퀴노잘린(quinoxaline)의 부반응을 해결하기 위해 친전자체와 친핵체 중 하나인 포타슘설페이트($K_2SO_4$)와 포타슘아이오다이드(KI)를 사용하였으며, 포타슘아이오다이드(KI)를 사용하였을 때, 용량 손실율 측면에서 포타슘 아이오다이드(KI)를 첨가제로 넣지 않았을 때($0.29Ah{\cdot}L^{-1}per\;cycle$) 보다 더 낮은 용량 손실율($0.21Ah{\cdot}L^{-1}per\;cycle$)로 더 높은 용량 유지율을 보였다.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.516-522
• /
• 2023

The co-precipitation process plays a key role in the decontamination of radionuclides from low and intermediate levels of liquid waste. For that reason, the removal of Cs ions from waste solution by the co-precipitation method was carried out. A simulated liquid waste (¹³³Cs) was prepared from a 0.1 M CsCl solution, while wastewater generated by washing steel ash served as a representative of radioactive cesium solution (¹³⁷Cs). By co-precipitation, potassium ferrocyanide was applied for the adsorption of Cs ions, while nickel nitrate and iron sulfate were selected for supporting the precipitation. The amount of residual Cs ions in the CsCl solution after precipitation and filtration was determined by ICP-OES, while the radioactivity of ¹³⁷Cs was measured using a gamma-ray spectrometer. After cesium removal, the amount of cesium appearing in both XRD and SEM-EDS was analyzed. The removal efficiency of ¹³³Cs was 60.21% and 51.86% for nickel nitrate and iron sulfate, respectively. For the ash-washing solution, the removal efficiency of ¹³⁷Cs was revealed to be more than 99.91% by both chemical agents. This implied that the co-precipitation process is an excellent strategy for the effective removal of radioactive cesium in waste solution treatment.

• 방사성폐기물학회지
• /
• 제15권1호
• /
• pp.1-14
• /
• 2017

본 연구에서는 고염/고방사성 폐액 내 함유된 주요 고방사성핵종인 Cs 제거를 목적으로 고효율의 복합 흡착제(potassium cobalt ferrocyanide (PCFC)-loaded chabazite (CHA)) 합성 및 이의 적용성을 평가하였다. 복합 흡착제는 Cs을 비롯한 다른 입자를 수용할 수 있는 CHA를 지지체로 선정하였으며, $CoCl_2$ 및 $K_4Fe(CN)_6$ 용액의 단계적인 함침/침전을 통해 PCFC를 CHA 세공 내에 고정화함으로써 합성하였다. 복합 흡착제의 합성 시 평균 입자크기가 $10{\mu}m$ 이상의 CHA를 지지체로 사용할 경우, PCFC 입자는 안정적인 형태로 고정화되었다. 또한, 합성 시 복합 흡착제의 정제를 증가시키는 세척 방법을 최적화함으로써, 복합 흡착제의 물리적 안정성이 향상되었다. 최적의 합성법을 통해 얻은 복합 흡착제에 의한 Cs 흡착 시, 담수(무염조건) 및 해수(고염 조건)에서 모두 빠른 흡착 속도를 보였으며, 염 농도와 무관하게 비교적 높은 분배계수 값($10^4mL{\cdot}g^{-1}$ 이상)을 나타내었다. 그러므로, 본 연구에서 합성한 복합 흡착제는 CHA 및 PCFC가 각각 가지고 있는 물리적 안정성과 Cs에 높은 선택성 등을 고려하여 촤적화한 소재이며, 고염/고방사성폐액에 함유되어 있는 Cs을 고효율로 신속하게 제거할 수 있음을 알 수 있다.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.189-193
• /
• 2020

In this study, electrokinetic remediation equipment was used to remove cesium (Cs) from clay soil and waste solution was treated with sorption process. The influence of electrokinetic process on the removal of Cs was evaluated under the condition of applied electric voltage of 15.0-20.0 V. In addition to monitoring the Cs removal, electrical current and temperature of the electrolyte during experiment were investigated. The removal efficiency of Cs from soil by electrokinetic method was more than 90%. After electrokinetic remediation, Cs was selectively separated from soil waste solution using sorbents. Various adsorption agents such as potassium nickel hexacyanoferrate (KNiHCF), Prussian blue, sodium tetraphenylborate (NaTPB), and zeolite were compared and KNiHCF showed the highest Cs removal efficiency. The Cs adsorption on KNiHCF reached equilibrium in 30 min. The maximum adsorption capacity was 120.4 mg/g at 0.1 g/L of adsorbent dosage. These results demonstrated that our proposed process combined electrokinetic remediation of soil and waste solution treatment with metal ferrocyanide can be a promising technique to decontaminate Cs-contaminated fine soil.

• 한국미생물·생명공학회지
• /
• 제6권4호
• /
• pp.167-171
• /
• 1978

전보에 개발된 배지에 국산 포도당을 이용한 발효결과, 구연산 생성은 37∼43g/ι이었다. 제품X의 경우는 제품Y에 비해 구연산 생성이 우수하여 43g/ι가 생성되었다. 국산 포도당을 Ambelite-IR -120으로 처리하고, peptone도 potassium ferrocyan-ide로 처리하여 금속이온을 제거한 뒤에, 10mg/ι의 철 이온을 첨가하였을 때 구연산 생성은 53gm/ι에 달하였다. 또한 원래 Sakaguchi 배지에 비해 3배나 많이 구연산이 생성되었다. 분리 동정된 Asp. niger를 다른 문헌과 비교하였을 때 큰 손색이 없었으며, 앞으로의 생리연구 및 mutation 연구가 필요하겠다.