• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.209-216
• /
• 2000

When subjected to earthquake shaking, saturated sandy soil may generate excess pore pressure. And a time may come when initial confining pressure will equal to excess pore pressure. Depending on the characteristics of the soil and the length of the drainage path, excess pore pressure was dissipated after earthquake. For this reason, it was induced settlement in grounds and fatal damage of various structures. In this study, settlement in silty sand grounds induced earthquake was evaluated using post-liquefaction constitutive equation between volumetric strain and shear strain from previous study. Using that, it was proposed that simplified estimation of settlement in silty sand grounds induced liquefaction.

• 한국지반공학회논문집
• /
• 제26권3호
• /
• pp.5-12
• /
• 2010

본 연구에서는 지진후의 침하에 미치는 반복 전단방향의 영향을 명확히 하기 위해， 일본의 표준사인 Toyoura sand와 천연모래인 Genkai sand 및 고로수쇄슬래그(GBFS)에 대해서 다축(다방향) 전단실험을 수행하였다. 공시체는 높이 75mm, 직경 20mm이다. 일련의 실험에서, 변형률 반복 재하회수 n=5, 20, 30, 100, 200회로 변화시켜 행하였으며, 전단변형률 진폭은 0.1%에서 1.0%까지 변화시켰다. 각 공시체의 상대밀도는 50, 60, 70%를 대상으로 하였다. Toyoura sand와 고로수쇄슬래그에 대한 실험결과로부터, 반복전단후의 침하는 상대밀도가 작을수록 크게 되며, 전단변형률 진폭의 증가와 더불어 크게 나타났다. 반복전단 방향의 차이에 따른 영향이 감소한 후에 Toyoura sand의 전단후의 침하는 일정치에 수렴하지만, 고로수쇄슬래그는 반복전단회수의 증가와 더불어 증가되었다. 또한, 반복전단후의 침하는 Kaolinite > Toyoura sand > Genkai sand > GBFS의 순으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1212-1217
• /
• 2008

In this study, in order to clarify the effect of the direction of cyclic shear on the post-earthquake settlement the multi-directional shear tests were carried out for Toyoura Japan standard sand, Genkai natural sand and the Granulated Blast Furnace Slag (GBFS). In a series of tests, number of strain cycles was changed as n=5-200 and the shear strain amplitude varied from 0.1% to 1.0%. The relative density was also changed as Dr=50, 60 and 70%. From the test results for Toyoura sand and GBFS, it is clarified that the post cyclic settlement is relatively large at the small relative density and becomes large with the shear strain amplitude. When the influence of the direction of cyclic shear is decreases, the post cyclic settlement strain for Toyoura sand is converged to a constant value, but the GBFS is increased with the number of strain cycles.

• 한국지반공학회논문집
• /
• 제38권6호
• /
• pp.5-16
• /
• 2022

국내 내진설계의 경우, 일반적으로 비배수 조건 해석을 통해 구조물과 지반의 변형을 검토하여 이를 설계 및 유지보수에 적용한다. 하지만 지진과 같은 동적하중에 의해 발생한 액상화 현상 이후 과잉간극수압의 소산과정을 거치게 되면 추가적인 지반의 침하가 발생하고 그에 따른 더 큰 피해가 발생한다. 그러므로 배수조건의 해석이 추가적으로 요구되는 실정이며, 지진이 끝난 후 소산과정을 거친 지반의 침하량을 산정하고 검토하는 등의 정확한 지반의 거동을 파악해 이를 설계 및 유지보수에 함께 적용해야 한다. 따라서 본 연구는 순수 사질토 지반을 Dr=30%의 느슨한 지반과 Dr=70%의 조밀한 지반으로 구분하여 비배수조건과 배수조건을 가정해 수치해석을 실시하였다. 특히, 지진과 같은 동적하중이 작용할 때, 지반의 배수조건을 고려하여 느슨한 지반과 조밀한 지반의 침하량 및 과잉간극수압비를 비교하고, 지진이 끝난 후 지반의 소산과정에서 나타나는 침하량 및 과잉간극수압비를 비교, 분석하는 부분에 초점을 맞췄다. 그 결과 지진 시 발생한 지반의 침하량 보다 소산과정을 거친 지반의 침하량이 약 30~60배 큰 결과를 얻었다.

• Steel and Composite Structures
• /
• 제53권1호
• /
• pp.103-114
• /
• 2024

This study proposes a new hybrid approach that utilizes post-earthquake survey data and numerical analysis results from an evolving finite element routing model to capture vulnerability processes. In order to achieve cost-effective evaluation and optimization, this study introduced an online data evolution data platform. The proposed method consists of four stages: 1) development of diagnostic sensitivity curve; 2) determination of probability distribution parameters of throughput threshold through optimization; 3) update of distribution parameters using smart evolution method; 4) derivation of updated diffusion parameters. Produce a blending curve. The analytical curves were initially obtained based on a finite element model used to represent a similar RC building with an estimated (previous) capacity height in the damaged area. The previous data are updated based on the estimated empirical failure probabilities from the post-earthquake survey data, and the mixed sensitivity curve is constructed using the update (subsequent) that best describes the empirical failure probabilities. The results show that the earthquake rupture estimate is close to the empirical rupture probability and corresponds very accurately to the real engineering online practical analysis. The objectives of this paper are to obtain adequate, safe and affordable housing and basic services, promote inclusive and sustainable urbanization and participation, implement sustainable and disaster-resilient buildings, sustainable human settlement planning and management. Therefore, with the continuous development of artificial intelligence and management strategy, this goal is expected to be achieved in the near future.

• Steel and Composite Structures
• /
• 제49권4호
• /
• pp.407-417
• /
• 2023

After a disaster like the catastrophic earthquake, the government have to use rapid assessment of the condition (or damage) of bridges, buildings and other infrastructures is mandatory for rapid feedbacks, rescue and post-event management. Many domain schemes based on the measured vibration computations, including least squares estimation and neural fuzzy logic control, have been studied and found to be effective for online/offline monitoring of structural damage. Traditional strategies require all external stimulus data (input data) which have been measured available, but this may not be the generalized for all structures. In this article, a new method with unknown inputs (excitations) is provided to identify structural matrix such as stiffness, mass, damping and other nonlinear parts, unknown disturbances for example. An analytical solution is thus constructed and presented because the solution in the existing literature has not been available. The goals of this paper are towards access to adequate, safe and affordable housing and basic services, promotion of inclusive and sustainable urbanization and participation, implementation of sustainable and disaster-resilient buildings, sustainable human settlement planning and manage. Simulation results of linear and nonlinear structures show that the proposed method is able to identify structural parameters and their changes due to damage and unknown excitations. Therefore, the goal is believed to achieved in the near future by the ongoing development of AI and control theory.

• Steel and Composite Structures
• /
• 제52권5호
• /
• pp.571-581
• /
• 2024

After a disaster like the catastrophic earthquake, the government have to use rapid assessment of the condition (or damage) of bridges, buildings and other infrastructures is mandatory for rapid feedbacks, rescue and post-event management. This work studies the tracking control problem of a class of strict-feedback nonlinear systems with input saturation nonlinearity. Under the framework of dynamic surface control design, RBF neural networks are introduced to approximate the unknown nonlinear dynamics. In order to address the impact of input saturation nonlinearity in the system, an auxiliary control system is constructed, and by introducing a class of first-order low-pass filters, the problems of large computation and computational explosion caused by repeated differentiation are effectively solved. In response to unknown parameters, corresponding adaptive updating control laws are designed. The goals of this paper are towards access to adequate, safe and affordable housing and basic services, promotion of inclusive and sustainable urbanization and participation, implementation of sustainable and disaster-resilient buildings, sustainable human settlement planning and manage. Simulation results of linear and nonlinear structures show that the proposed method is able to identify structural parameters and their changes due to damage and unknown excitations. Therefore, the goal is believed to achieved in the near future by the ongoing development of AI and control theory.

• 대한토목학회논문집
• /
• 제28권2C호
• /
• pp.83-94
• /
• 2008

본 연구에서는 흙의 미소변형에서 대변형까지 고려할 수 있는 유효응력해석을 이용하여 매립지반에 대한 액상화 및 진동으로 발생하는 침하량을 예측하였다. 유효응력모델은 진동 중에 발생하는 과잉간극수압을 계산하여 이에 따른 흙의 강성저하와 수반되는 지반의 변위를 모델링하였다. 진동으로 인한 지반의 변형률 수준이 작은 경우에 적합한 등가선형해석을 이용한 액상화 평가를 실시하여 유효응력모델을 이용한 예측법과 비교하였다. 등가선형해석에서 계산된 전단응력비에 해당하는 표준관입시험치를 국내에서 발생 가능한 지진규모와 실트질 함유량에 따라 콘관입저항치로 환산한 값과 현장에서 계측된 콘관입저항치를 서로 비교하여 액상화 가능성을 예측하였다. 두 곳의 인천지역 매립지에 대한 액상화 해석을 위하여 매립지에서 계측된 콘관입저항치와 전단파 속도를 이용하여 입력 물성값을 결정하였다. 인천 매립지에 대한 두 액상화 해석 방법의 결과는 액상화 발생 여부에서 유사하였으며 깊이에 따른 연속적인 액상화 판정과 얇은 층의 액상화 예측이 가능하여 액상화 예측의 정밀도를 높였다. 유효응력모델을 이용한 액상화 해석 결과는 지표면 아래 20m 이내에서 초기 유효수직응력의 40%~70% 정도의 과잉간극수압이 발생하였으며 이로 인하여 지표면에서 10cm 미만의 침하가 발생하였다.