• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.625-634
• /
• 1986

The strain distribution on a welded aluminum alloy transition joint produced by a static tensile load has been measured using a moire method combined with photoelastic coating method. The test specimens were made of aluminum alloy 6061-T6 and 2014-T6 butt welded with ER-4043 filler metal, and were post welded heat treated (solid solution heat treatment 502.deg. C 70min.) and precipitated (artificial aging 171.deg. C 600min.) to cause an abrupt change of mechanical properties between the base metals and weld metal. The photoelastic epoxy rubber was cemented on the specimen grating which had been reproduced on the specimen surface by using an electropolishing. The measurements were compared with strains computed by Finite Element Analysis. The following results were abtained. (1) The maximum strain were distributed along the center line in the transverse directiion of the weld metal. (2) The strain gradient along the fusion line increased approaching the V-groove tip and the maximum value was observed at a quarter of width from the V-groove tip. (3) The moire method combined with photoelastic coating was proved very useful for real time strain measurement in the welded aluminum alloy transition joint.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.49-57
• /
• 2001

In this study, the residual stress fields of multi-pass welded were analyzed by FEA under various geometrical conditions. In order to estimate the effects of pipe geometries on residual stress distribution, welding processes of each model were performed under the same heat cycles. And then, the influence of cutting off the weld bead on the residual stress redistribution was also estimated. From the results, in the range of t/D=0.05, axial residual stresses on the outer surface of the welded pipe were linearly decreased with pipe diameter increase. On the other hand, hoop residual stresses were not influenced by them. And both axial and hoop residual stresses on the outer surface of the welded pipe were increased with pipe diameter increase. But, when t/D was smaller than 0.05, they were converged in the nearly same value. The maximum residual stresses were generated at around HAZ. It in therefore necessary to consider them in welding design, strength evaluation, and analysis of fracture characteristics.

• Mycobiology
• /
• v.34 no.2
• /
• pp.92-98
• /
• 2006

A total of 34 species belonging to 21 genera of fungi were recorded on passion fruits of both pure and hybrid origin in Uganda, however, the pure type exhibited wider spectrum (28 species and 16 genera) than the hybrid type (21 & 15). Also, yeasts (unidentified and Rhodotorula mucilaginosa) were also encountered in high numbers. Moreover, the mean count of all mycobiota obtained from the pure type was higher than that of hybrid, despite the bigger size of the later. Members of yeasts and Cladosporium followed by Phoma, Penicillium, Fusarium and Alternaria species dominated on passion fruits of pure origin, while only C. cladosporioides, F. solani and yeasts dominated on the hybrid type. Treatment with Na-hypochlorite exhibited inhibitory effects on the total mycobiotic propagules as well as the dominant species from fruits of both types. The current results, therefore, suggest the use of Na-hypochlorite to control the post-harvest mycobiota associated with passion fruits. Regarding the mycobiota contaminating passion juice, yeasts were found to be the major contaminants with Candida parapsilosis being the most common. Moulds constituted only a minor proportion with Acremonium strictum followed by Fusarium chlamydosporum, F. moniliforme, F. acuminatum and F. solani as the most dominant species. In the heat-treated juice samples, the counts of the most commonly encountered mycobiota (both yeasts and molds) were significantly inhibited or completely eliminated. Some unidentified Bacillus species were also recovered from the juice, however, their counts in the heated samples were increased but insignificantly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.58-61
• /
• 2003

ITO (indium tin oxide) thin films on PET (polyethylene terephthalate) substrate have been deposited by a dc reactive magnetron sputtering without heat treatments such as substrate heater and post heat treatment. Each sputtering parameter during the sputtering deposition is an important factor for the high quality of ITO thin films deposited on polymeric substrate. Particularly, the material, electrical and optical properties of as-deposited ITO oxide films are dominated by the ratio of oxygen partial pressure. As the experimental results, the excellent ITO films are prepared on PET substrate at the operating conditions as follows: operating pressure of 5 mTorr,target-substrate distance of 45 mm, dc power of 20-30 W, and oxygen gas ratio of 10 %. The optical transmittance is above 80 % at 550 nm, and the sheet resistance and resistivity of films are $24\;{\Omega}$/square and $1.5{\times}10^{-3}\;cm$, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.116-123
• /
• 2008

In the fossil power plant, the reliability of the components which consist of the many welded parts depends on the quality of welding. The residual stress is occurred by the heat flux of high temperature during weld process. This decreases the mechanical properties as the strength of fatigue and fracture or causes the stress corrosion cracking and fatigue fracture. Especially, the accidents due to the residual stress occurred at the weld parts of high-temperature and high-pressure pipes and steam headers. Also, the residual stress of the welded part in the recently constructed power plants has been brought into relief as the cause of various accidents. The aim of this study is the measurement of the residual stress using the x-ray diffraction method. The merits of this are more accurate and applicable than other methods. The materials used for the study is P92 steel for the use of high temperature pipe on super critical condition. The variables of tests are the post-weld heat treatment, the surface roughness and the depth from the original surface. The test results were analyzed by the distributed characteristics of the full width at half maximum intensity (FWHM) in x-ray diffraction intensity curve and by the relation of hardness with FWHM.

• Particle and aerosol research
• /
• v.13 no.4
• /
• pp.183-189
• /
• 2017

Potassium hexatitanate ($K_2Ti_6O_{13}$) with high thermal insulating capacity, good mechanical properties, and excellent chemical stability are promising functional materials in the field of reinforcing material, heat insulating paints and automotive brake linings. In this study, we successfully synthesized rod-shaped potassium hexatitanate ($K_2Ti_6O_{13}$) by aerosol spray drying and post heat treatment as an eco-friendly process. The $KHCO_3-TiO_2$ porous particles were firstly synthesized from a colloidal mixture of $K_2CO_3$ and $TiO_2$ via aerosol spray drying. Size of $KHCO_3-TiO_2$ porous particles was ranged from $1{\mu}m$ to $5{\mu}m$. The porous particles were then heated to fabricate rod-type $K_2Ti_6O_{13}$. The length and width of rod-type composites were affected by temperature and heating time. The length and width of $K_2Ti_6O_{13}$ were increased by 830 nm and 500 nm, respectively, as the reaction temperature and time increased.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.361-365
• /
• 2015

Vanadium dioxide ($VO_2$) of monoclinic phase exhibits Metal Insulator Phase Transition (MIPT) phenomenon involving a sharp change in electrical and optical properties at $68^{\circ}C$. Solution-based process is applied to form uniform $VO_2$ coating layer on ceramic tiles. This can selectively block the near-infrared light to possibly reduce the energy loss and prevent dew condensation caused by the temperature difference. Heat treatment conditions including temperature and dwell time were examined to obtain a monoclinic $VO_2$ single phase. Both rutile and monoclinic $VO_2$ phases were observed from in the tiles post-annealed below $700^{\circ}C$. Desired monoclinic $VO_2$ single phase was grown in the tiles heat treated at $750^{\circ}C$. Nano facets of irregular size were observed in the monoclinic $VO_2$ phase involving the phase-transition. Grain growth of monoclinic $VO_2$ phase was observed as a function of dwell time at $750^{\circ}C$.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.51-57
• /
• 2010

Brittle microstructure created in a heat affected zone (HAZ) during the welding of low alloy steel can be eliminated by post-weld heat treatment (PWHT). If the PWHT is not possible during a repair welding, the controlled bead depositions of multi-pass welding should be applied to obtain tempering effect on the HAZ without PWHT. In order to anticipate and control the tempering effect during the temper bead welding, the definition of temperature curve obtained from the analytical solution was suggested in this research. Because the analytical solution for heat flow is expressed as a mathematical equation of weld parameters, it may be effective in anticipating the effect of each weld parameter on the tempering in HAZ during the successive bead depositions. The reheating effect by the successive bead layer on the brittle coarse grained HAZ formed by earlier bead deposition was estimated by comparing the overlapped distance between the temperature curves in the HAZ. Three layered weld specimens of SA508 base metal with A52 filler were prepared by controlling heat input ratio between layers. The tempering effect anticipated by using the overlapped distance between the temperature curves was verified by measuring the micro-hardness distribution in the HAZ of prepared specimens. The temperature curve obtained from analytical solution was expected as a good tool to find optimal temper bead welding conditions.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.1016-1020
• /
• 1997

Treatments of irradiation alone and/or in combination with heat were investigated for the sterilization of Escherichia coli O157: H7. D values of the strain were 129.2 min at $50^{\circ}C$, 27.1 min at $55^{\circ}C$, and 2.4 min at $60^{\circ}C$. The survival effect of E. coli O157:H7 during heating at various media was investigated. On heating at temperature of $60^{\circ}C$ for 10 min, the strain was generally more resistant in the media containg such chemical substrates such as 0.03 M cysteine, 1% sodium citrate or 5% sucrose, whereas this strain was appeared weaker in the chemical substrates added group such as 1% meat extract, 1% casein or 1% casamino acid. In the case of irradiation alone, $D_{10}$ value of E. coli O157:H7 was 0.116 kGy, and inactivation factors were $17{\sim}25$ at doses of 2 to 3 kGy. Pre-and post-irradiation heating showed the same $D_{10}$ value about 0.07 kGy. And Inactivation factors were $25{\sim}41$ at doses of 2 to 3 kGy. Therefore, combination treatment with heat and irradiation significantly increased in inactivation rate by increasing radiation sensitivity of E. coli O157:H7.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.877-883
• /
• 2003

Multi-degradable master hatch (M/B) was prepared and 0.05 mm polyethylene (PP) food packaging films containing 0, 10, and 20% M/B were manufactured by inflation film processing. The films were exposed to UV radiation, fungi, and heat in order to observe their photolysis, biodegradability, and thermal degradability, respectively. While pure PP film maintained more than 70% of its original elongation after 8 weeks of UV radiation, an almost perfect loss in the elongation of PP film containing 20% M/B was observed. Significant decreases in elongation of PP films by heat treatment $(68{\pm}2^{\circ}C)$ were also found in samples containing the multi-degradable M/B. By observing changes in film surface after the inoculation of fungi using scanning electron microscopy (SEM), the biodegradability of plastic film could be accelerated with the addition of multi-degradable M/B. The results of the mulching test in yard showed that adding multi-degradable M/B can effectively degrade plastic films in natural environmental conditions without interrupting the growth of plants.