• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.226-232
• /
• 2023

As a potential alternative to flash memory, HfO₂/Al₂O₃ stacks appear to be a viable option as charge capture layers in charge trapping memories. The paper undertakes a review of HfO₂/Al₂O₃ stacks as charge trapping layers, with a focus on comparing the number, thickness, and post-deposition heat treatment and γ-ray and white x-ray treatment of such stacks. Compared to a single HfO₂ layer, the memory window of the 5-layered stack increased by 152.4% after O₂ annealing at ±12 V. The memory window enlarged with the increase in number of layers in the stack and the increase in the Al/Hf content in the stack. Furthermore, our comparison of the treatment of HfO₂/Al₂O₃ stacks with varying annealing temperatures revealed that an increased annealing temperature resulted in a wider storage window. The samples treated with O₂ and subjected to various γ radiation intensities displayed superior resistance. and the memory window increased to 12.6 V at ±16 V for 100 kGy radiation intensity compared to the untreated samples. It has also been established that increasing doses of white x-rays induced a greater number of deep defects. The optimization of stacking layers along with post-deposition treatment condition can play significant role in extending the memory window.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.96-101
• /
• 2004

Conventionally, SMAW process was applied to join pipes of RCL, which caused lot of loss in time and cost due to excessive heat input and defects in joining section. Recently, narrow-gap welding(NGW) process was introduced to overcome the disadvantages of SMAW. However, the application of NGW to nuclear power plant is not yet common because safety of NGW process is not proven. In present paper, the welded coupons are made of carbon steel. They are manufactured under different processes; general welding(GW), post-weld heat treatment(PWHT) after GW, repair welding after GW and PWHT with repair welding after GW in carbon steel. Performed are various mechanical tests investigation of microstructure, hardness test, tensile test at room and high temperature, bending test, impact test and J-R test. It is verified that the mechanical properties of carbon steel are greatly changed after repair welding process due to applied heat flux, and that the effect of PWHT is beneficial.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.1
• /
• pp.1-5
• /
• 2010

Silver stabilizing layer of coated conductor has been prepared by dip coating method using organic silver complexes containing 10 wt% silver as a starting material. Coated silver complex layer was dried in situ with hot air and converted to crystalline silver by post heat treatment in flowing oxygen atmosphere. A dense continuous silver layer with good surface coverage and proper thickness of 230 nm is obtained by multiple dip coatings and heat treatments. The film heat treated at $500^{\circ}C$ showed good mechanical adhesion and crystallographic property. The interface resistivity between superconducting YBCO layer and silver layer prepared by dip coating was measured as $0.67\;{\times}\;10^{-13}\;{\Omega}m^2$. Additional protecting copper layer with the thickness of $20\;{\mu}m$ was successfully deposited by electroplating. The critical current measured with the specimen prepared by dip coating and sputtering on same quality YBCO layer showed similar value of ~140 A and proved its ability to replace sputtering method for industrial production of coated conductor.

• Korean Journal of Poultry Science
• /
• v.39 no.3
• /
• pp.183-193
• /
• 2012

This study was conducted to investigate the effect of feeding the electrolytic materials on blood and carcass traits of broiler during transportation exposed under intense heat condition in summer. The broilers were selected on the day when the outside temperature was about $32^{\circ}C$ to provide heat stressed environment. Broilers reared for 33 d were selected and fed with the electrolytic materials ($NaHCO_3$, NaCl, KCl) for 2 days. Treatments were as follows; feeding the underground water for control, $NaHCO_3$ (1.0%) + NaCl (0.5%) for treament 1, KCl (0.5%) + NaCl (0.5%) for treatment 2, KCl (1.0%) + NaCl (0.5%) treatment 3, KCl (0.5%) + $NaHCO_3$ (1.0%) + NaCl (0.5%) for treatment 4 and KCl (1.0%) + $NaHCO_3$ (1.0%) + NaCl (0.5%) for treament 5. pH of chicken meat increased for treatments group of electrolytic material, especially, that of treatment 3 was highest when compared to the other treatments. The frequency rate (%) of $1^+$ quality grade were 33.3, 60.0 and 83.3% at control, treatment 3, 4 and treatment 5, respectively. Occurrence rates of PSE were 50% for control and 13.3% for treatment 5. Corticosterone increased at the post-harvest period compared to the pre-harvest period of broiler and have small disparity between pre-and post-harvest only except treatment 3 when compared to control. $pCO_2$ partial pressure of blood at the pre-harvest period was low in all treatments by heat stress, the disparity value of control was high for control, and those of treatment 4 and 5 were low compared to other treatments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.653-659
• /
• 2018

High-rise buildings and complex facilities are a representative urban system for the masses, and it requires an increasing role of commodity and safety. Smoke and toxic gasses can cause accidents due to fire in these systems. The purpose of this study is to develop a fiber screen material for emergency evacuation passages that can be avoided quickly and safely in cases of disasters. The fiber screen material is applicable to folding devices for emergency evacuation passages. The material is different from general steel material in that it is lightweight with less burden during storage for a long time in a roll form in a folding device. It also has an excellent secondary function in that it is less affected by radiant heat. Three kinds of fiber screen materials were selected that have good flame retardancy and post-processing characteristics. A performance evaluation was performed by a heat shrinkage test, contact heat test, combustibility test, flame retardancy test, tensile strength test, and tear strength test. As a result, the lightweight fabric shows excellent performance through post-processing, and silicone resin coating can secure safety of the pizza by the fiber screen material performance and radiant heat. The optimum post-treatment conditions were evaluated by performing a burning test after coating two kinds of glass fibers and four types of flame-retardant silicone resins with different weight and thickness.

• Korean Journal of Veterinary Research
• /
• v.35 no.3
• /
• pp.603-613
• /
• 1995

Plasma progesterone($P_4$) assay has been introduced to apply to the differential diagnosis of reproductive disorders and the monitoring of responses of ovarian dysfunction to $PGF_2{\alpha}$ or GnRH treatment in the 204 postpartum and postinsemination subestrus dairy cows. 1. The incidence rate of reproductive disorders in 204 subestrus cows, diagnosed by palpation per rectum and plasma $P_4$ determination using 'Two sample test'(Day 0+Day 10) were as follows; silent heat or error of estrus detection 110(53.9%), persistent corpus luteum 26(12.7%), follicular cyst 16(7.8%), inactive ovary 12(5.9%), luteal cyst 11(5.4%), granulosa cell tumor of ovary 1(0.5%), fetal mummification 1(0.5%), endometritis 15(7.4%) and pyometra 12(5.9%), respectively. 2. After the $PGF_2{\alpha}$ treatment to the 76 cows with silent heat or error of estrus detection, persistent corpus luteum, or luteal cyst, plasma $P_4$ concentrations at day 3 post treatment using 'Two sample test'(Day 0+Day 3) remained low(<1.0ng/ml) in all 76 cows. Therefore all 76 cows responded positively to $PGF_2{\alpha}$ treatment. Seventeen cows with follicular cyst or inactive ovary were treated with GnRH. All 7 cows with follicular cyst and 4 cows with inactive ovary remained high($${\geq_-}1.0ng/ml$$) a plasma $P_4$ concentrations at day 12 post treatment using 'Two sample test'(Day 0+Day 12), but 6 cows with inactive ovary remained low(<1.0ng/ml) a plasma $P_4$ concentrations. Therefore all 7 cows with follicular cyst and 4 cows with inactive ovary responded positively, but 6 cows with inactive ovary responded negatively to GnRH treatment. 3. The mean days from treatment to first service, number of cows conceived on first service(%), mean number of services per conception, mean days from initial treatment to conception, and mean number of cows conceived by 100 days post treatment(%) were 5.0 and 26.2 days, 45(59.2%) and 6(35.3%) cows, 1.5 and 1.7 services, 13.6 and 22.6 days, and 62(81.6%) and 9(52.9%) cows in group of $PGF_2{\alpha}$ and GnRH treatment, respectively. These results indicated that plasma $P_4$ assay was practical as an aid to diagnosing reproductive disorders and to monitoring responses of ovarian dysfunction to $PGF_2{\alpha}$ and GnRH treatment in subestrus cows.

• Journal of the Korean Ceramic Society
• /
• v.42 no.9 s.280
• /
• pp.624-630
• /
• 2005

To investigate the possibility of the $ZrO_2$ buffer layer as the insulator for the Metal-Ferroelectric-Insulator-semiconductor (MFIS) structure, $ZrO_2$ and $SrBi_2Ta_2O_9$ (SBT) thin films were deposited on the P-type Si(111) wafer by the R.F. magnetron-sputtering method. According to the process with and without the post-annealing of the $ZrO_2$ buffer layer and SBT thin film, the diffusion amount of Sr, Bi, Ta elements show slight difference through the Glow Discharge Spectrometer (GDS) analysis. From X-ray Photoelectron Spectroscopy (XPS) results, we could confirm that the post-annealing process affects the chemical binding condition of the interface between the $ZrO_2$ thin film and the Si substrate. Compared to the MFIS structure without the post-annealing of the $ZrO_2$ buffer layer, memory window value of MFlS structure with post-annealing of the $ZrO_2$ buffer layer were considerably improved. The window memory of the Pt/SBT (260 nm, $800^{\circ}C)/ZrO_2$ (20 nm) structure increases from 0.75 to 2.2 V under the applied voltage of 9 V after post-annealing.

• Journal of Welding and Joining
• /
• v.34 no.3
• /
• pp.61-68
• /
• 2016

Characteristics of dissimilar metal welds between alloy steel ASTM A387 Gr. 91 and carbon steel ASTM A516 Gr.70 made with Flux cored arc welding(FCAW) have been evaluated in terms of microstructure, mechanical strength, chemical analysis by EDS as well as corrosion test. Three heat inputs of 15.0, 22.5, 30.0kJ/cm were employed to make joints of dissimilar metals with E91T1-B9C wire. Post-weld heat treatment was carried out at $750^{\circ}C$ for 2.5 h. Based on microstructural examination, tempered martensite and lower bainite were formed in first layer of weld metal. The amount of tempered martensite was decreased and the amount of lower bainite was increased with increasing heat input and layer. Heat affected zone of alloy steel showed the highest hardness due to the formation of tempered Martensite and lower Bainite. Tensile strengths of dissimilar welds decreased with increasing heat inputs. Dissimilar welds seemed to have a good hot cracking resistance due to the low HCS index below 4. The salt spray test of dissimilar metals showed that the corrosion rate increased with increasing heat inputs due to the increase of the amount of lower Bainite.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5405-5411
• /
• 2011

The effects of heat input (1.5~3.6 kJ/mm) and post weld heat treatment (PWHT, $600^{\circ}C$, 40hr.) on the TMCP HSB600 steel weldments made by GMAW process were investigated. The tensile strengths and hardness of as-welded specimens were decreased as heat input increased, but CVN (Charpy V-Notch) impact energy did not show any differences. The fine-grained acicular ferrite was mainly formed in the low heat input while polygonal and side plate ferrites were dominated in the high heat inputs. Meanwhile, tensile strength and hardness of PWHT weldments were decreased due to the coarsening and globular of microstructure as well as reduction of residual stresses.

• Journal of muscle and joint health
• /
• v.18 no.2
• /
• pp.192-202
• /
• 2011

Purpose: This study examined the effects of heat therapy combined with aromatherapy on pain, flexibility, sleep, and depression in elderly women with osteoarthritis. Methods: This study was designed as a nonequivalent control group quasi-experimental study based upon data acquired through a pre-post test. The experimental group (n=21) was treated using an aroma-permeated hot compress applied to the knee. The cotton towel was heated in a microwave to $45^{\circ}C$, and 2~3 drops of lavender were applied on it. The towel was wrapped with plastic bag to prevent aroma leakage and retain heat. The treatment was applied the towel for 20 minutes, three times a day for 3 weeks. The control group (n=24) was not given any treatment. Data were collected using a VAS(100mm) for pain, questionnaire for sleep and depression, and a goniometer for knee flexibility. The data were analyzed with ${\chi}^2$-test and t-test using SPSS/Win18.0. Results: There were significant differences in knee pain (p=.001) and flexibility (p<.001), subjective quality of sleep (p=.020) and depression (p=.003) between the groups. Conclusion: Heat therapy combined with aromatherapy may be an effective nursing intervention and self-care technique to ameliorate pain and depression and to improve flexibility and sleep in elderly suffering from osteoarthritis.