• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.342-348
• /
• 2015

In this paper, fuel cell power generation system that is being studied in recent railway field was applied to compensate for the voltage drop due to the load as driving electric vehicle. PSIM simulation program is to be used to implement the modeling of the electric railway for AC AT feeder system. For it, It was applied to the product-type single-phase PLL algorithm, step-down converter is controlled as power so as to have the fuelcell generation system. Based on it's result, a reactive power due to the catenary impedance in accordance with the current flowing is compensated as linked with fuelcell generation system which supplied the current to the power supply grid. and then its performance was confirmed that voltage compensation effect obtained at SubStation (SS), SubSectioning Post (SSP), Sectioning Post (SP).

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.693-695
• /
• 2003

차단기내에서 일어나는 아크철상을 모의하기 위해서는 수학적으로 표현할 수 있어야 한다. 하지만, 아크의 물리적 현상이 대단히 복잡하여 수식화 하기가 쉽지 않을 백만 아니라 논리적으로 이상이 없는 결과를 얻는 일도 쉽지 않다. 특히, 아크를 표현하는 수식에는 많은 경험적 변수 또는 실험결과를 고려하여 조정되어야 할 변수가 존재한다. 그 대표적인 것이 난류 변수(turbulence parameter)와 방사에너지 전달에서의 방사계수(emission coefficient)이다. 본 논문은 차단기가 전류차단 후의 열적회복과정에서, 난류변수에 따른 아크-후 전류(post arc current)를 계산한 결과를 제시한 것이다. 난류변수에 따른 아크의 냉각효과를 검토하고 있으며, 실험결과 비교하여 가장 잘 맞는 난류변수의 값을 제시하고 있다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6639-6641
• /
• 2014

Background: To evaluate the clinical significance of atypical squamous cells of undetermined significance (ASCUS) in PAP test in post-menopausal women and compare with reproductive age women. Materials and Methods: A total of 367 patients who referred to our gynecologic oncology clinic were included to the study between September 2012 and August 2013. Data for 164 post-menopausal (group 1) and 203 pre-menopausal (group 2) women with ASCUS cytology were evaluated retrospectively. Immediate colposcopy and endocervical curettage was performed for both groups and conization for all women with a result suggestive of CIN2-3. Histopathological results and demographic features of patients were compared between the two groups. Results: Mean age of the patients was $54.6{\pm}6.5$ years in group 1 and $38{\pm}6.6$ years in group 2. Some 14 (8.5%) of post-menopausal women and 36 (17.7%) of pre-menopausal women were current smokers (p=011). Totals of 38 (23.2%) post-menopausal and 64 (31.5%) pre-menopausal women were assessed for HPV-DNA. High risk HPV was detected in 7 (4.3%) and 21 (10.3%), respectively (p=0.029). Final histopathological results recorded were normal cervix, low grade cervical intra-epithelial neoplasia (CIN 1), and high grade cervical intra-epithelial neoplasia (CIN2-3). In group 1 results were 84.8%, 12.2% and 1.8%, respectively, and in group 2 were 71.9%, 23.2% and 4.9%. There were no cases of micro invasive or invasive cervical carcinoma in either group. Two cases were detected as endometrial carcinoma in the menopausal group (1.2%). Conclusions: In current study we found that preinvasive lesions were statistically significantly higher in pre-menopausal women than post-menopausal women with ASCUS. Cervicitis was more common in menopausal women. Therefore, we think that in case of ASCUS in a post-menopausal woman there is no need for radical management.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.367-379
• /
• 2020

The primary objective of this research is to develop a better understanding of consumer's post-purchase psychological state by examining the influence of sales promotion and emotional brand attachment on post-purchase cognitive dissonance, taking into account the mediating role of impulse buying behavior. The current study addresses several gaps in literature. Firstly, it is hard to find the direct impact of sales promotion and emotional brand attachment on post-purchase cognitive dissonance. Secondly, to the best of our knowledge, few studies have investigated the mediating role of impulse buying behavior in consumer research. A sample of 256 respondents was collected from Pakistani retail consumers. The statistical findings of this study show that sales promotion has a significant positive effect on the impulse buying behavior and post-purchase cognitive dissonance. Furthermore, results indicate that emotional brand attachment has a negative influence on impulse buying behavior but has a significant positive impact on post-purchase cognitive dissonance. Meanwhile, impulse buying behavior is a potential mediator between sales promotion, emotional brand attachment, and post-purchase cognitive dissonance relationships. The moderating role of Gender describes that the positive relationship between sales promotion and post-purchase cognitive dissonance will be stronger for women as compared to men at a higher level of sales promotion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.276-283
• /
• 2017

A polysilicon-based metal-semiconductor-metal (MSM) photodetector was fabricated by means of our new methods. Its photoresponse characteristics were analyzed to see if it could be applied to a sensor system. The processes on which this study focused were an alloy-annealing process to form metal-polysilicon contacts, a post-annealing process for better light absorption of as-deposited polysilicon, and a passivation process for lowering defect density in polysilicon. When the alloy annealing was achieved at about $400^{\circ}C$, metal-polysilicon Schottky contacts sustained a stable potential barrier, decreasing the dark current. For better surface morphology of polysilicon, rapid thermal annealing (RTA) or furnace annealing at around $900^{\circ}C$ was suitable as a post-annealing process, because it supplied polysilicon layers with a smoother surface and a proper grain size for photon absorption. For the passivation of defects in polysilicon, hydrogen-ion implantation was chosen, because it is easy to implant hydrogen into the polysilicon. MSM photodetectors based on the suggested processes showed a higher sensitivity for photocurrent detection and a stable Schottky contact barrier to lower the dark current and are therefore applicable to sensor systems.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.2
• /
• pp.61-66
• /
• 2017

$SnO_2$ was electrodeposited on nodule-type Cu foil at varing current density and electrodeposition time. Unlike the previous research results, when the anodic current is applied, the $SnO_2$ layer was not electrodeposited and the substrate is corroded. When the cathodic current was applied, the $SnO_2$ layer could be successfully deposited. At this time, the surface microstructure of the powdery type was observed, which showed similar crystallinity to amorphous and had a very large surface area. Crystallinity increased after low-temperature heat treatment at $250^{\circ}C$ or lower. As a result of evaluating the charge/discharge performances as an anode material for lithium ion battery, it was confirmed that the capacity of the heat treated $SnO_2$ was increased more than 2 times, but it still showed a limit point showing initial low coulombic efficiency and low cyclability. However, it was confirmed that the battery performances may be enhanced through optimizing the electrodeposition process and introducing post heat treatment.

• Ocean and Polar Research
• /
• v.33 no.spc3
• /
• pp.397-407
• /
• 2011

To understand the vertical structure of ocean currents from raw data observed by lowered-ADCP (LADCP), these data require post-processing. Data were processed using Krahman's version 10.8 processing software based on Matlab. It is estimated the influence of auxiliary data affecting the processed current structure. The bottom-tracked velocities and the GPS information significantly contribute the offset on reference velocities in the bottom layer and barotropic ones in the middle layer, respectively. Good quality data can be obtained when LADCP is least tilted in pitch and roll during observation. In situ application of LADCP to the (northward) volume transports of Kuroshio in the East China Sea proved to be 24.8. Sv (= $1{\times}10^6m^3s^{-1}$) in October 2007, and 28.2 Sv in June 2008, respectively. The volume transport is relatively large over the continental slope when compared to the shelf or the deep sea.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.180-184
• /
• 2002

In this paper, the electrical properties of PVD Ta and $TaN_x$ gate electrodes on $SiO_2$ and their thermal stabilities are investigated. The results show that the work functions of $TaN_x$ gate electrode are modified by the amount of N, which is controlled by the flow rate of $N_2$during reactive sputtering process. The thermal stability of Ta and $TaN_x$ with RTO-grown $SiO_2$ gate dielectrics is examined by changes in equivalent oxide thickness (EOT), flat-band voltage ($V_{FB}$), and leakage current after post-metallization anneal at high temperature in $N_2$ambient. For a Ta gate electrode, the observed decrease in EOT and leakage current is due to the formation of a Ta-incorporated high-K layer during the high temperature annealing. Less change in EOT and leakage current is observed for $TaN_x$ gate electrode. It is also shown that the frequency dispersion and hysteresis of high frequency CV curves are improved significantly by a post-metallization anneal.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.2
• /
• pp.75-84
• /
• 2016

Objective: The aim of this study is to suggest some improvement ideas based on the validity and the reliability analyses of the current safety culture measurement method applied to the Korean nuclear power industry. Background: Wrong safety culture is known as one of the major causes of the disasters such as the space shuttle Columbia disaster or the Fukushima Nuclear Power Plant accident. Assessment of safety culture of an organization is important to build a safer organizational environment as well as to identify the risks hidden in the organization. Method: A face validity of the current safety culture measurement method was analyzed by comparison of the key factors of safety culture in the Korean nuclear power industry with those factors reviewed in the previous studies. The current interview method was analyzed to identify the problems which degrade the consistency of evaluation. Results: Most safety culture factors reviewed in the literatures are covered in the list of the Korean nuclear power industry safety culture factors. However the unstructured questions used in the interview may result in inconsistency of safety culture evaluation among interviewers. Conclusion: This study suggests some examples which might improve the consistency of interviewers' evaluation on safety culture such as a post interview evaluation form. Application: An extended post interview evaluation form might help to increase the accuracy of the interviewing method for Korean nuclear industry safety culture evaluation.

• Resources Recycling
• /
• v.5 no.4
• /
• pp.17-24
• /
• 1996

The computer simulation model was established to verify the applicability of smelting reduction concept to treatment of industrial wastes which becomes issue on the enviromental and recycling view point. Computer simulation model provides as following results. The increase of post combustion ratio(PCR) and heat transfer efficiency of PC energy(HTE) is effective ways to save energy. But, in order to increase PCR, recovery efficiency of post combustion energy(HTE) have to be higher than 85% HTE considering refractory life and saving energy together. Coke is most useful fuel source because it shows lowest dependence of PCR and low hydrogen content. The quality of hot metal of current process would be expected to the similar level with that of blast furnace. The utilization of scrap and Al dross can be also possible to maximize the advantages of current process which is high temperature and chemical dilution with hot metal and slag. In case of scrap, energy consumption was slightly increases because of heating up energy of scrap. Consquently, current process concept provides the possibility of intergrating recycles of industrial wastes materials such as EAF slag, coke oven dust, life terminated acidic refractory, aluminium dross and scrap by smelting reduction process.